tomcarmen Posted February 5, 2015 Share #76 Posted February 5, 2015 any updates ? I would install dsm 5.1 but until phpVirtualBox not ' working on new dsm not perform ugrade !! Thanks Seba expect more news Quote Link to comment Share on other sites More sharing options...
fatez Posted February 5, 2015 Share #77 Posted February 5, 2015 Mee too Tapatalk'ed Quote Link to comment Share on other sites More sharing options...
rthga81 Posted February 6, 2015 Share #78 Posted February 6, 2015 I think i check this post on a daily basis to see if there has been an update Quote Link to comment Share on other sites More sharing options...
Adrirand Posted February 7, 2015 Share #79 Posted February 7, 2015 Hi, is there a way to install Guest Additions ? And will it be usefull ? Quote Link to comment Share on other sites More sharing options...
Trublion Posted February 7, 2015 Share #80 Posted February 7, 2015 Hi everyone ! First, let's thank Seba for this awesooome work. Next, let's talk about... issues This package seems broken on DSM 5.1 environment, it's probably because the kernel module isn't compatible with the machine's Linux Kernel. Seba (... stien ? are you french ? ), are you still working on this package ? Perhaps you could post the package creation process so the community could help you ? Thanks in advance, take care ! Trublion Quote Link to comment Share on other sites More sharing options...
seba Posted February 8, 2015 Author Share #81 Posted February 8, 2015 Hi, To help troubleshoot problems here are few tips: Virtualbox should create log file at following location /var/log/vbox.log. From ssh try this do start drivers /var/packages/virtualbox/target/scripts/vboxdrv.sh start of this goes without error then /var/packages/virtualbox/target/scripts/vboxinit.sh start and finally if vboxinit was without errors /var/packages/virtualbox/target/scripts/vboxweb-service.sh start I've added this to first post as well for reference. Since I won't get my mb anytime soon from repair, you are welcome to try and fix package. Basically you need to setup crosscompile environment for info use Synology guide at their website. Source for vbox driver you can find in "All distributions" package at virtualbox download page (use AMD64). Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted February 8, 2015 Share #82 Posted February 8, 2015 Hi seba, thank you for your help. Have you a donation link? I tested the postet commands with no error. Serverdrive2> /var/packages/virtualbox/target/scripts/vboxdrv.sh start Starting VirtualBox kernel modules ...done. Serverdrive2> /var/packages/virtualbox/target/scripts/vboxinit.sh start Serverdrive2> /var/packages/virtualbox/target/scripts/vboxweb-service.sh start Serverdrive2> Then i startet the Virtual Machine in the phpVirtualBox. Error comes "The virtual machine 'WinXP' has terminated unexpectedly during startup with exit code 1" In the /var/log/vbox.log file: [spoiler=] VirtualBox web service 4.3.12 r93733 linux.amd64 (May 16 2014 15:15:59) release log 00:00:00.005302 main Log opened 2015-02-08T12:49:03.084424000Z 00:00:00.005309 main Build Type: release 00:00:00.005316 main OS Product: Linux 00:00:00.005321 main OS Release: 3.2.40 00:00:00.005326 main OS Version: #7 SMP Thu Jan 29 14:30:34 CST 2015 00:00:00.005402 main DMI Product Name: Synoden 00:00:00.005439 main DMI Product Version: -1 00:00:00.005693 main Host RAM: 1998MB total, 1691MB available 00:00:00.005708 main Executable: /opt/VirtualBox/vboxwebsrv 00:00:00.005711 main Process ID: 17241 00:00:00.005714 main Package type: LINUX_64BITS_GENERIC 00:00:00.030683 SQPmp Socket connection successful: host = 127.0.0.1, port = 18083, master socket = 9 00:00:06.702704 SQPmp Request 1 on socket 10 queued for processing (1 items on Q) 00:00:06.703100 SQW01 New SOAP thread started 00:00:06.703215 SQW01 Processing connection from IP=127.0.0.1 socket=10 (0 out of 1 threads idle) 00:00:06.714936 SQPmp Request 2 on socket 11 queued for processing (1 items on Q) 00:00:06.715432 SQPmp Request 3 on socket 13 queued for processing (2 items on Q) 00:00:06.715703 SQW02 New SOAP thread started 00:00:06.715785 SQW02 Processing connection from IP=127.0.0.1 socket=11 (0 out of 2 threads idle) 00:00:06.741628 SQW01 Processing connection from IP=127.0.0.1 socket=13 (0 out of 2 threads idle) 00:00:06.753128 SQPmp Request 4 on socket 14 queued for processing (1 items on Q) 00:00:06.754395 SQW03 New SOAP thread started 00:00:06.756993 SQW03 Processing connection from IP=127.0.0.1 socket=14 (0 out of 3 threads idle) 00:00:06.845763 SQPmp Request 5 on socket 10 queued for processing (1 items on Q) 00:00:06.845885 SQW02 Processing connection from IP=127.0.0.1 socket=10 (0 out of 3 threads idle) 00:00:06.989657 SQPmp Request 6 on socket 11 queued for processing (1 items on Q) 00:00:06.989771 SQW02 Processing connection from IP=127.0.0.1 socket=11 (0 out of 3 threads idle) 00:00:07.453663 SQPmp Request 7 on socket 10 queued for processing (1 items on Q) 00:00:07.453742 SQW03 Processing connection from IP=127.0.0.1 socket=10 (1 out of 3 threads idle) 00:00:08.215297 SQPmp Request 8 on socket 11 queued for processing (1 items on Q) 00:00:08.215407 SQW02 Processing connection from IP=127.0.0.1 socket=11 (2 out of 3 threads idle) 00:00:08.237700 SQPmp Request 9 on socket 10 queued for processing (1 items on Q) 00:00:08.237785 SQW03 Processing connection from IP=127.0.0.1 socket=10 (2 out of 3 threads idle) 00:00:08.278853 SQPmp Request 10 on socket 11 queued for processing (1 items on Q) 00:00:08.278955 SQW02 Processing connection from IP=127.0.0.1 socket=11 (2 out of 3 threads idle) 00:00:08.309959 SQPmp Request 11 on socket 10 queued for processing (1 items on Q) 00:00:08.310060 SQW01 Processing connection from IP=127.0.0.1 socket=10 (2 out of 3 threads idle) 00:00:09.881433 SQPmp Request 12 on socket 11 queued for processing (1 items on Q) 00:00:09.881553 SQW03 Processing connection from IP=127.0.0.1 socket=11 (2 out of 3 threads idle) 00:00:10.041978 SQPmp Request 13 on socket 10 queued for processing (1 items on Q) 00:00:10.042074 SQW02 Processing connection from IP=127.0.0.1 socket=10 (2 out of 3 threads idle) 00:00:11.320362 SQPmp Request 14 on socket 11 queued for processing (1 items on Q) 00:00:11.320675 SQW01 Processing connection from IP=127.0.0.1 socket=11 (2 out of 3 threads idle) 00:00:14.319348 SQPmp Request 15 on socket 10 queued for processing (1 items on Q) 00:00:14.319448 SQW01 Processing connection from IP=127.0.0.1 socket=10 (2 out of 3 threads idle) 00:00:15.271024 SQPmp Request 16 on socket 11 queued for processing (1 items on Q) 00:00:15.271123 SQW02 Processing connection from IP=127.0.0.1 socket=11 (2 out of 3 threads idle) 00:00:15.292925 SQW02 API method name: IProgress::COMGETTER(ErrorInfo) 00:00:15.293031 SQW02 API return code: 0x80004005 (NS_ERROR_FAILURE) 00:00:15.293099 SQW02 COM error info result code: 0x80004005 (NS_ERROR_FAILURE) 00:00:15.293135 SQW02 COM error info text: Error info is not available, operation is still in progress 00:00:15.319944 SQPmp Request 17 on socket 10 queued for processing (1 items on Q) 00:00:15.320054 SQW03 Processing connection from IP=127.0.0.1 socket=10 (2 out of 3 threads idle) 00:00:17.319580 SQPmp Request 18 on socket 11 queued for processing (1 items on Q) 00:00:17.319684 SQW01 Processing connection from IP=127.0.0.1 socket=11 (2 out of 3 threads idle) 00:00:17.357205 SQPmp Request 19 on socket 10 queued for processing (1 items on Q) 00:00:17.357295 SQW02 Processing connection from IP=127.0.0.1 socket=10 (2 out of 3 threads idle) 00:00:17.377446 SQPmp Request 20 on socket 11 queued for processing (1 items on Q) 00:00:17.377561 SQW01 Processing connection from IP=127.0.0.1 socket=11 (2 out of 3 threads idle) 00:00:21.135321 SQPmp Request 21 on socket 10 queued for processing (1 items on Q) 00:00:21.135424 SQW03 Processing connection from IP=127.0.0.1 socket=10 (2 out of 3 threads idle) 00:00:25.134649 SQPmp Request 22 on socket 11 queued for processing (1 items on Q) 00:00:25.134750 SQW02 Processing connection from IP=127.0.0.1 socket=11 (2 out of 3 threads idle) - vbox.log 64/64 100% Thank you very much. Dodo Edit: If i start it manual: Serverdrive2> ./usr/local/virtualbox/opt/VirtualBox/VBoxManage startvm WinXP --type headless Waiting for VM "WinXP" to power on... VBoxManage: error: The virtual machine 'WinXP' has terminated unexpectedly during startup with exit code 1 VBoxManage: error: Details: code NS_ERROR_FAILURE (0x80004005), component Machine, interface IMachine Serverdrive2> Quote Link to comment Share on other sites More sharing options...
Trublion Posted February 8, 2015 Share #83 Posted February 8, 2015 Same here. You can try this on your NAS, it may help you : /var/packages/virtualbox/target/scripts/vboxdrv.sh start (-> supposed to say "done") /var/packages/virtualbox/target/scripts/vboxdrv.sh status (-> "started" or something like that) /var/packages/virtualbox/target/scripts/vboxdrv.sh stop (-> failed !) And if you call VBoxHeadless binary, it will display an error message saying that the Kernel module isn't available. Perhaps you should recompile Vbox with the newest toolchains ? (tried on DS415+... so with an x86_64 Atom Avoton CPU) Quote Link to comment Share on other sites More sharing options...
marcerkens Posted February 9, 2015 Share #84 Posted February 9, 2015 Hi all, Same problem here sinds i have upgraded my DS713 to DSM 5.1 The virtual machine 'linuxtest' has terminated unexpectedly during startup with exit code 1 for me unable to solve this problem, could Seba please have a look in to this. Espacialy for Virtual box i have upgrade by DS713 from 1GB RAM to 4GB RAM. it would be very nice to get it working again. so please Saba could you solve the issue. It would be appriciated very much! Kind Regards MMarc Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted February 9, 2015 Share #85 Posted February 9, 2015 I have Compiled the linux-header and linux-Image (5.1 Toolchain and Source). Installed it under 5.1 Debian CHRoot and then i Installed the Virtualbox. I have Setup Virtualbox with "vboxdrv Setup"... No errors, then i have replaced the Original Seba VirtualBox Folder and the Kernel Files under /lib/modules/3.2.40/ but it don't work. Same problem. Serverdrive2> ./VBoxHeadless VBoxHeadless: Error -1908 in suplibOsInit! VBoxHeadless: Kernel driver not installed VBoxHeadless: Tip! Make sure the kernel module is loaded. It may also help to reinstall Virt ualBox. Serverdrive2> I don't have the know how, the full Weekend wasted... Quote Link to comment Share on other sites More sharing options...
rthga81 Posted February 9, 2015 Share #86 Posted February 9, 2015 You got further than I did with it over the weekend. Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted February 9, 2015 Share #87 Posted February 9, 2015 Hi, i have make some mistakes. Today i have a little bit success with compiling... I have make the new VirtualBox Kernels and it works on my System. Someone want to test? I can't Upload anything here, so send me a PN with your mail... Dodo Quote Link to comment Share on other sites More sharing options...
shomrighausen Posted February 9, 2015 Share #88 Posted February 9, 2015 Hi, i have make some mistakes.Today i have a little bit success with compiling... I have make the new VirtualBox Kernels and it works on my System. Someone want to test? I can't Upload anything here, so send me a PN with your mail... Dodo PM sent. Quote Link to comment Share on other sites More sharing options...
garycooper Posted February 9, 2015 Share #89 Posted February 9, 2015 Hi, i have make some mistakes.Today i have a little bit success with compiling... I have make the new VirtualBox Kernels and it works on my System. Someone want to test? I can't Upload anything here, so send me a PN with your mail... Dodo just tested it, and it works !!! thank you very much tested it on DSM 5.1 update 2 HP N54L Quote Link to comment Share on other sites More sharing options...
shomrighausen Posted February 9, 2015 Share #90 Posted February 9, 2015 I can also confirm that it's working. Tested in generic hardware with an E5700 processor (VT-x enabled). Quote Link to comment Share on other sites More sharing options...
rthga81 Posted February 9, 2015 Share #91 Posted February 9, 2015 System will not allow me to PM you but can you email me the info @ ryan@rysnas.com Thanks sir! Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted February 9, 2015 Share #92 Posted February 9, 2015 @rthga81 Email send @all I have a Virtual Windows XP with Bridged Network, but the Windows don't become a IP from Router. Static IP works, but very very slow to connect. Somebody any idea? Quote Link to comment Share on other sites More sharing options...
rthga81 Posted February 10, 2015 Share #93 Posted February 10, 2015 Yup after replacing the files it worked! If Seb don't mind I can recreate the SPK file... I will have this posted on the blog in a bit with download links too. Unless you guys want to do this another way - totally up to you! thanks so much for your help! Quote Link to comment Share on other sites More sharing options...
rthga81 Posted February 10, 2015 Share #94 Posted February 10, 2015 (edited) Here is a link Guys. Seba I left your name on it for the credit. I just updated the files and repackaged. If you want this removed just leave a message or email and I will remove ASAP. This package will now work with DSM 5.1 on Synology DS 1513+ and DS1515+ tested on both systems. Enjoy Thanks guys i will be back with an update link. Edited February 10, 2015 by Guest Quote Link to comment Share on other sites More sharing options...
rthga81 Posted February 10, 2015 Share #95 Posted February 10, 2015 @all I have a Virtual Windows XP with Bridged Network, but the Windows don't become a IP from Router. Static IP works, but very very slow to connect. Somebody any idea? Turn off Windows Firewall; Once I turned windows firewall off and made sure I was not bridging to a bonded connection the DHCP router picked up the Windows Machine and I had no problems since logging in or out. Quote Link to comment Share on other sites More sharing options...
dodo-dk Posted February 10, 2015 Share #96 Posted February 10, 2015 I turned it off but don't help. Same Problem with a Virtual Debian. Under OpenMediaVault with VirtualBox it works. Quote Link to comment Share on other sites More sharing options...
Mittel Posted February 10, 2015 Share #97 Posted February 10, 2015 So is it working or not? or are there just some limitations and which ones? I don't want to take any risk as I am using one virtual machine in production. Thank you for your work and dedication! Quote Link to comment Share on other sites More sharing options...
T-REX-XP Posted February 10, 2015 Share #98 Posted February 10, 2015 I have last xpenoboot with latest os, but after install last virtualbox spk, this pakage doesnt start(( How i can view logs for this package?? p.s Contributor, please fix version of virtualbox in packet from 4.3 to 4.5. After installation we can see 4.3 v in packages center. thanks 4 u work. Quote Link to comment Share on other sites More sharing options...
shomrighausen Posted February 10, 2015 Share #99 Posted February 10, 2015 I successfully installed the original .SPK file and manually updated the four files provided earlier (before the re-packaging). This is on 5.1-5022-update 2. I also tried the re-packaged .SPK file - on a DS1512+, VM running on an i7 and whitebox hardware. The new .SPK file will install successfully, but will never 'run'. I haven't had a chance to dig through the log files, but I suspect that there is an issue with the re-package. I tested on both 5.0-4482 and 5.1-5022-update 2. Quote Link to comment Share on other sites More sharing options...
rthga81 Posted February 10, 2015 Share #100 Posted February 10, 2015 I am not able to figure out how to repackage the file and make it work. I replace the .ko files in the package than repackage the tgz. Recreate the SPK and it installs but will not start. It seems that it is grabbing information from another location. I can replace the .ko files with the new kernels though that were provided and it works perfectly fine. /shrug. I will break apart all the files tonight and try to figure it out. Also, i put together a fast blog to explain how to copy files over using SCP - It's a pain. http://rysnas.com/wordpress/ Seba could you be of help with this sir? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.