jarugut Posted September 18, 2020 Share #601 Posted September 18, 2020 3 minutes ago, Zippi said: While I was waiting, I tried the combination Virtualbox 6.0.8 + phpvirtualbox 6.0 and it works! Thanks anyway for your help @jarugut! It's all new to me and I've read the whole thread! I've 6Gb but i only see 3Gb so i must add the fix to the GRUB.CFG file right? Can that be okay: set common_args_3615='disable_mtrr_trim syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1' The file GRUB.CFG is that of the BOOT USB KEY were i've modified VIP,PID, MAC address etc?? Right? Were i must place the line command? At the beginning? I don't know! To use version DSM 6.2.3 did you have to use a new network card and disable the onboard one? Virtualbox and phpvirtualbox do they have to go in pairs as versions or has it nothing to do with it? Like : Virtualbox 6.0.8 + phpvirtualbox 6.0 Virtualbox 6.1.3 + phpvirtualbox 6.1 or not??? Sorry for the many questions but I'm glad I managed at least to make it work, now I try it a bit! Thanx a lot again for your help!!!!! You're welcome. To use all memory ram in AMD you should to had in the set common_args_3615 the disable_mtrr_trim option, like in your comment. This option is in the USB bootloader inside the grub.cfg file. In my case I'm using an intel nic and disabled the integrated nic. (I think that currently is not necessary but intel nic always help). Yes, if you read the github instructions for installation you will see that the virtualbox and phpvirtualbox goes in pairs. Quote Link to comment Share on other sites More sharing options...
Zippi Posted September 19, 2020 Share #602 Posted September 19, 2020 9 hours ago, jarugut said: You're welcome. To use all memory ram in AMD you should to had in the set common_args_3615 the disable_mtrr_trim option, like in your comment. This option is in the USB bootloader inside the grub.cfg file. In my case I'm using an intel nic and disabled the integrated nic. (I think that currently is not necessary but intel nic always help). Yes, if you read the github instructions for installation you will see that the virtualbox and phpvirtualbox goes in pairs. Thanx again for your quick reply! Today i'll try and i'll be back..... Quote Link to comment Share on other sites More sharing options...
Zippi Posted September 19, 2020 Share #603 Posted September 19, 2020 I added "disable_mtrr_trim" and now i have : Base Memory 5719Mb It's OK now? Thanx! Quote Link to comment Share on other sites More sharing options...
Zippi Posted September 19, 2020 Share #604 Posted September 19, 2020 I'm trying to install UBUNTU but when arrive here don't work mouse and keyboard. What i'm doing wrong? I use iMAC with Safari Thanx! Quote Link to comment Share on other sites More sharing options...
jarugut Posted September 19, 2020 Share #605 Posted September 19, 2020 2 hours ago, Zippi said: I'm trying to install UBUNTU but when arrive here don't work mouse and keyboard. What i'm doing wrong? I use iMAC with Safari Thanx! are you tried with the option in the input tab on general settings of the vm use the USB keyboard and Tablet USB? A part of that I don't know, sorry. About RAM memory it's ok your number have in mind that some memory is reserved for the hardware but you've recovered around 2,7GB extra. Quote Link to comment Share on other sites More sharing options...
Zippi Posted September 19, 2020 Share #606 Posted September 19, 2020 (edited) 1 hour ago, jarugut said: are you tried with the option in the input tab on general settings of the vm use the USB keyboard and Tablet USB? A part of that I don't know, sorry. About RAM memory it's ok your number have in mind that some memory is reserved for the hardware but you've recovered around 2,7GB extra. I tried it but don't work. Probably it work if it's enabled and connected directly to the N54L. But via iMAC (remote) probably i must install the VBoxGuestAdditions.ISO pack but VirtualBox search it in /usr/share/virtualbox/VBoxGuestAdditions.iso and don't let me to tell in which directory i've placed it. I should copy it via SSH, i don't see another way..... VirtualBox let me download it but put it in the VirtulBoxVMs/additions directory..... How you can use your mouse and keyboard of the VM on XPEnology? Are you connected to your XPEnology server via remote? Thanx! Edited September 19, 2020 by Zippi Quote Link to comment Share on other sites More sharing options...
Zippi Posted September 19, 2020 Share #607 Posted September 19, 2020 I tried everything but i cannot access like root to /usr/share/virtualbox to put inside the file VBoxGuestAdditions.iso How can i install this file or connect like root to that directory? The root password is always wrong.....there is no way..... Please help me! Thanx! Quote Link to comment Share on other sites More sharing options...
jarugut Posted September 22, 2020 Share #608 Posted September 22, 2020 On 9/20/2020 at 1:44 AM, Zippi said: I tried everything but i cannot access like root to /usr/share/virtualbox to put inside the file VBoxGuestAdditions.iso How can i install this file or connect like root to that directory? The root password is always wrong.....there is no way..... Please help me! Thanx! 1. SSH to machine as admin user. 2. Enter command sudo -s and providing admin password. 3. Enter command synouser --setpw root "password_that_you_want" Quote Link to comment Share on other sites More sharing options...
Zippi Posted September 22, 2020 Share #609 Posted September 22, 2020 47 minutes ago, jarugut said: 1. SSH to machine as admin user. 2. Enter command sudo -s and providing admin password. 3. Enter command synouser --setpw root "password_that_you_want" OK, i'll try..... But is correct install VBoxGuestAdditions.ISO as VirtualBox ask? And if yes i must put it in "/usr/share/virtualbox" path/folder so VirtualBox can see it and goes to install it? How you can use your mouse and keyboard of the VM on XPEnology? Are you connected to your XPEnology server via remote or directly? Thanx for your patience! Quote Link to comment Share on other sites More sharing options...
jarugut Posted September 23, 2020 Share #610 Posted September 23, 2020 18 hours ago, Zippi said: OK, i'll try..... But is correct install VBoxGuestAdditions.ISO as VirtualBox ask? And if yes i must put it in "/usr/share/virtualbox" path/folder so VirtualBox can see it and goes to install it? How you can use your mouse and keyboard of the VM on XPEnology? Are you connected to your XPEnology server via remote or directly? Thanx for your patience! in my opinion if you have the iso file you only needs to assign to the vm and install it. You can leave the iso in the same folder of the vms I'm using the vm in remote mouse and keyboard included, I have not connected any mouse or keyboard to the nas. Quote Link to comment Share on other sites More sharing options...
Zippi Posted September 23, 2020 Share #611 Posted September 23, 2020 1 hour ago, jarugut said: in my opinion if you have the iso file you only needs to assign to the vm and install it. You can leave the iso in the same folder of the vms I'm using the vm in remote mouse and keyboard included, I have not connected any mouse or keyboard to the nas. Thank you for your reply. I set my root password with: 1. SSH to machine as admin user. 2. Enter command sudo -s and providing admin password. 3. Enter command synouser --setpw root "password_that_you_want" and seems to have gone well..... Then when i try to access with root/root password with terminal/winscp/putty the result is : PERMISSION DENIED Why? Quote Link to comment Share on other sites More sharing options...
jarugut Posted September 24, 2020 Share #612 Posted September 24, 2020 16 hours ago, Zippi said: Thank you for your reply. I set my root password with: 1. SSH to machine as admin user. 2. Enter command sudo -s and providing admin password. 3. Enter command synouser --setpw root "password_that_you_want" and seems to have gone well..... Then when i try to access with root/root password with terminal/winscp/putty the result is : PERMISSION DENIED Why? please, read the forum! you cannot access directly with root, you must to connect with you admin user and later you should execute something like sudo su - Quote Link to comment Share on other sites More sharing options...
kretzu77 Posted October 12, 2020 Share #613 Posted October 12, 2020 I have updated to 6.1.4 and I can't see shared folders list anymore. In File list all it's good. But shared folder list is blank Any suggestions? Thanks' Quote Link to comment Share on other sites More sharing options...
archon Posted December 24, 2020 Share #614 Posted December 24, 2020 Hi, Is anybody interested in using this package (vbox 6.1.16) compiled to apollolake platform? (DS918+) I have previously used 6.0.8 on bromolow, did hardware update (ASRock J5040) and was forced to change platform to DS918, so I compiled vbox myself (using seba's package). I am currently working on phpvirtualbox4dsm for this package. Quote Link to comment Share on other sites More sharing options...
Dutch87 Posted January 8, 2021 Share #615 Posted January 8, 2021 (edited) On 12/24/2020 at 10:29 PM, archon said: Hi, Is anybody interested in using this package (vbox 6.1.16) compiled to apollolake platform? (DS918+) I have previously used 6.0.8 on bromolow, did hardware update (ASRock J5040) and was forced to change platform to DS918, so I compiled vbox myself (using seba's package). I am currently working on phpvirtualbox4dsm for this package. Dear Archon, I found this post also at that time in google and yes, I would be very very interested in an updated version! I do have an DS916+ with Braswell Intel CPU, but in the future might upgrade to the 918+ also. Manny thanks in advance if there is anything possible for any of them! Joeri Edited January 8, 2021 by Dutch87 Quote Link to comment Share on other sites More sharing options...
Helios123 Posted January 14, 2021 Share #616 Posted January 14, 2021 On 12/24/2020 at 10:29 PM, archon said: Hi, Is anybody interested in using this package (vbox 6.1.16) compiled to apollolake platform? (DS918+) I have previously used 6.0.8 on bromolow, did hardware update (ASRock J5040) and was forced to change platform to DS918, so I compiled vbox myself (using seba's package). I am currently working on phpvirtualbox4dsm for this package. I'm also very interested in that! Thx Quote Link to comment Share on other sites More sharing options...
Setchen Posted January 19, 2021 Share #617 Posted January 19, 2021 Hi all, Is there an alternative, particularly for Windows VMs? sorry for bothering or create a new topic on this. maybe someone already reflected on it. But, I've made a search and didn't found any related topics. ---> Here is my problem; following Adobe Flash EOL, I'm unable to monitor, via the console, my VMs on phpvirtualdsm webpage. Thus, I can't set up the RDP connection since I can't access the VM. PS: I'm using my MacBookPro as working platform with OSX Catalina. Some of my VMs, are on the NAS, and are running/administred on Virtualbox/Phpvirtuaalbox4dsm. Thank all! Quote Link to comment Share on other sites More sharing options...
rok1 Posted January 20, 2021 Share #618 Posted January 20, 2021 (edited) in the xxx.vbox file you'll see the settings.. <VirtualBox xmlns="http://www.virtualbox.org/" version="1.17-linux"> <Machine uuid="{xxx}" name="DietPi" OSType="Debian_64" snapshotFolder="Snapshots" lastStateChange="2021-01-19T00:59:58Z"> <MediaRegistry> <HardDisks> <HardDisk uuid="{xxx}" location="Clone-disk001.vmdk" format="VMDK" type="Normal"/> </HardDisks> </MediaRegistry> <Hardware> <CPU count="4"> <PAE enabled="false"/> <NestedHWVirt enabled="true"/> <LongMode enabled="true"/> <X2APIC enabled="true"/> <HardwareVirtExLargePages enabled="true"/> </CPU> <Memory RAMSize="4096"/> <Chipset type="ICH9"/> <Paravirt provider="KVM"/> <Boot> <Order position="1" device="HardDisk"/> <Order position="2" device="None"/> <Order position="3" device="None"/> <Order position="4" device="None"/> </Boot> <Display VRAMSize="16"/> <VideoCapture screens="1" file="." fps="25"/> <RemoteDisplay enabled="true"> <VRDEProperties> <Property name="TCP/Ports" value="3389"/> </VRDEProperties> </RemoteDisplay> Look for the Remote Display section.. in it you can view the current port for RDP and change if necessary. make sure the VM is powered off and backup the .vbox file before editing. Edited January 20, 2021 by rok1 Quote Link to comment Share on other sites More sharing options...
Setchen Posted January 20, 2021 Share #619 Posted January 20, 2021 8 hours ago, rok1 said: in the xxx.vbox file you'll see the settings.. Look for the Remote Display section.. in it you can view the current port for RDP and change if necessary. make sure the VM is powered off and backup the .vbox file before editing. Thank you! Quote Link to comment Share on other sites More sharing options...
jarugut Posted February 9, 2021 Share #620 Posted February 9, 2021 (edited) Thank you Seba76! The last release update of the PhpVirtualbox4dsm version 6.1.4 is working completely, currently it's fixed the problem of the USB assigment. Releases · seba76/phpvirtualbox4dsm · GitHub Release Virtualbox 6.1.4 for Synology DSM 6.2.x · seba76/virtualbox4dsm · GitHub Edited February 9, 2021 by jarugut Quote Link to comment Share on other sites More sharing options...
Arabezar Posted May 4, 2021 Share #621 Posted May 4, 2021 On 12/25/2020 at 12:29 AM, archon said: Hi, Is anybody interested in using this package (vbox 6.1.16) compiled to apollolake platform? (DS918+) I have previously used 6.0.8 on bromolow, did hardware update (ASRock J5040) and was forced to change platform to DS918, so I compiled vbox myself (using seba's package). I am currently working on phpvirtualbox4dsm for this package. Wow! Such good news! I've also made the upgrade to DS918+ from bromolow so far but unfortunately no one makes the compilation for apollolake ((( We all are waiting for this stuff! ))) Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted April 8, 2022 Share #622 Posted April 8, 2022 Hi is there a way that we have virtualbox on DSM7 Thank you Quote Link to comment Share on other sites More sharing options...
archon Posted August 1, 2023 Share #623 Posted August 1, 2023 It may be possible. The toolkit and toolchain are available for 7.2-63134 https://archive.synology.com/download/ToolChain/ No kernel for 7.2 yet, only 7.1.1-42962 https://archive.synology.com/download/ToolChain/Synology NAS GPL Source With kernel and some time it may be possible to construct spk package. I did some modifications to package with virtualbox for 6.2, compiled newer version, but in 7.x there are new rules for packages, so a lot of reading is involved. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.