pepeEL Posted March 6, 2019 Share #551 Posted March 6, 2019 And for cedarview please Quote Link to comment Share on other sites More sharing options...
Webster Posted March 31, 2019 Share #552 Posted March 31, 2019 Hi Seba, Thank you for your great works. You help me a lots to run vm on dsm6.2 One more question. It is possible to run or import vbox guest image file on /volume2/ I try to mount the path to volume2 but unsuccess. Webster Quote Link to comment Share on other sites More sharing options...
Webster Posted March 31, 2019 Share #553 Posted March 31, 2019 On 1/23/2019 at 9:54 PM, kretzu77 said: Hi, When open phpVirtualbox I receive user and password window. I tried all users and passwords on DSM with no luck. There is a was to skip this please? Id: admin Pw: admin Quote Link to comment Share on other sites More sharing options...
TechAndi Posted May 4, 2019 Share #554 Posted May 4, 2019 nemesis122 THANK YOU! The version of VirtualBox, which was in the MEGA link Folder WORKED! Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted May 5, 2019 Share #555 Posted May 5, 2019 Hi Techandy Please which spk do you have downloaded ?post the link here Because there is a new one ty Quote Link to comment Share on other sites More sharing options...
pacemaker72 Posted May 16, 2019 Share #556 Posted May 16, 2019 Does this virtual box work on DSM 6.2.1 3615xs? I am not sure what kernel..scared to updateSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
pacemaker72 Posted May 18, 2019 Share #557 Posted May 18, 2019 (edited) Thanks Seba. Its working on 6.2.2 24922 on 3615xs...(i also tested on 3617xs, it installed but link throwing 403 error as if DSM is blocking it) tested both DSMs in ESXI inside vmware workstation on windows 7 PC(..crazy)...upgraded from 6.2.1 23824 Hope it helps someone. ..patiently waiting for seba's Virtualbox 6 (for nested virtualization so i can install ESXI on virtual box itself:) ) Edited May 18, 2019 by pacemaker72 Quote Link to comment Share on other sites More sharing options...
jarugut Posted May 22, 2019 Share #558 Posted May 22, 2019 On 5/18/2019 at 7:26 PM, pacemaker72 said: Thanks Seba. Its working on 6.2.2 24922 on 3615xs...(i also tested on 3617xs, it installed but link throwing 403 error as if DSM is blocking it) tested both DSMs in ESXI inside vmware workstation on windows 7 PC(..crazy)...upgraded from 6.2.1 23824 Hope it helps someone. ..patiently waiting for seba's Virtualbox 6 (for nested virtualization so i can install ESXI on virtual box itself:) ) I confirm that this version works perfectly in the new DSM version 6.2.2-24922 Quote Link to comment Share on other sites More sharing options...
jayal1972 Posted June 3, 2019 Share #559 Posted June 3, 2019 On 1/22/2018 at 7:18 PM, snailjay said: Did anyone can solve the problem that: There was a problem extracting the (phpvirtualbox-). Make sure DSM is able to resolve: download.virtualbox.org and virtualbox.org. (Some packages are downloaded from there) Quote Link to comment Share on other sites More sharing options...
seba Posted June 4, 2019 Author Share #560 Posted June 4, 2019 23 hours ago, jayal1972 said: Make sure DSM is able to resolve: download.virtualbox.org and virtualbox.org. (Some packages are downloaded from there) There was a package that was downloading few files from internet, but they are not created by me. On 3/31/2019 at 6:33 AM, Webster said: Hi Seba, Thank you for your great works. You help me a lots to run vm on dsm6.2 One more question. It is possible to run or import vbox guest image file on /volume2/ I try to mount the path to volume2 but unsuccess. Webster If you refer about not being able to select anything outside volume1 in file browser then yes. You need to edit file config.php in webstations folder there look for line var $browserRestrictFolders = array('/volume1'); you can modify it to suite your needs. Also Virtualbox 6.0.8 is out you can find it on github where I'm posting new versions. Quote Link to comment Share on other sites More sharing options...
jarugut Posted June 6, 2019 Share #561 Posted June 6, 2019 On 6/4/2019 at 8:25 PM, seba said: There was a package that was downloading few files from internet, but they are not created by me. If you refer about not being able to select anything outside volume1 in file browser then yes. You need to edit file config.php in webstations folder there look for line var $browserRestrictFolders = array('/volume1'); you can modify it to suite your needs. Also Virtualbox 6.0.8 is out you can find it on github where I'm posting new versions. The new version 6.0.8 on DSM 6.2.2-24922 (3615xs) over HP Microserver N54L works perfectly, included the USB assignation to the virtual computers. Thank you Seba! Good job! Quote Link to comment Share on other sites More sharing options...
pacemaker72 Posted June 7, 2019 Share #562 Posted June 7, 2019 On 6/4/2019 at 2:25 PM, seba said: Also Virtualbox 6.0.8 is out you can find it on github where I'm posting new versions. Thanks Seba. 6.0.8 works good on DSM 6.2.1-23824 Update 6- 3615xs (AMD). I thought i would see the new nested virtualization option but its not there (Guess DSM passthrough problem..i dont know) Thanks again Quote Link to comment Share on other sites More sharing options...
seba Posted June 8, 2019 Author Share #563 Posted June 8, 2019 19 hours ago, pacemaker72 said: Thanks Seba. 6.0.8 works good on DSM 6.2.1-23824 Update 6- 3615xs (AMD). I thought i would see the new nested virtualization option but its not there (Guess DSM passthrough problem..i dont know) Thanks again What is possible in GUI depends on good folks maintaining phpVirtualBox but you can always use shell and VBoxManage. For nested options as doc states here you would run following as root /opt/VirtualBox/VBoxManage modifyvm "My VM Name" --nested-hw-virt on Quote Link to comment Share on other sites More sharing options...
pacemaker72 Posted June 13, 2019 Share #564 Posted June 13, 2019 On 6/8/2019 at 11:57 AM, seba said: What is possible in GUI depends on good folks maintaining phpVirtualBox but you can always use shell and VBoxManage. For nested options as doc states here you would run following as root /opt/VirtualBox/VBoxManage modifyvm "My VM Name" --nested-hw-virt on Thanks Seba for follow up. i tried above without success. when i start ESXI in virtualbox the error was "this host does not support "AMD RVI" hardware assisted MMU virtualization." Anyway this is not very important to me so i gave up. Otherwise virtualbox is working well for other VMs Quote Link to comment Share on other sites More sharing options...
seba Posted June 16, 2019 Author Share #565 Posted June 16, 2019 On 6/13/2019 at 8:14 PM, pacemaker72 said: Thanks Seba for follow up. i tried above without success. when i start ESXI in virtualbox the error was "this host does not support "AMD RVI" hardware assisted MMU virtualization." Anyway this is not very important to me so i gave up. Otherwise virtualbox is working well for other VMs Did you try that in some linux distro on same hardware? Quick googling led me to this 1. Please reboot the system and then press [Delete] to enter the BIOS setup. 2. BIOS > Advanced > CPU Configuration > SVM Mode -> set enabled 3. BIOS > Advanced > North Bridge Configuration > IOMMU -> set enabled. If it is working on same hardware under linux distro it should work here to. Quote Link to comment Share on other sites More sharing options...
pacemaker72 Posted June 16, 2019 Share #566 Posted June 16, 2019 Did you try that in some linux distro on same hardware? Quick googling led me to this 1. Please reboot the system and then press [Delete] to enter the BIOS setup. 2. BIOS > Advanced > CPU Configuration > SVM Mode -> set enabled 3. BIOS > Advanced > North Bridge Configuration > IOMMU -> set enabled. If it is working on same hardware under linux distro it should work here to.Yea i saw those posts too...I only tried on synology DSM. Also those two options are set to ON from the beginning because virtualbox itself needs those to work.Thank youSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
d3mone Posted June 30, 2019 Share #567 Posted June 30, 2019 On 6/6/2019 at 3:26 PM, jarugut said: The new version 6.0.8 on DSM 6.2.2-24922 (3615xs) over HP Microserver N54L works perfectly, included the USB assignation to the virtual computers. Thank you Seba! Good job! Which architecture did you install? Quote Link to comment Share on other sites More sharing options...
jarugut Posted July 2, 2019 Share #568 Posted July 2, 2019 On 6/30/2019 at 10:16 AM, d3mone said: Which architecture did you install? I'm using the Bromolow, the 3615xs architecture. Quote Link to comment Share on other sites More sharing options...
MajorTruEvil Posted August 8, 2019 Share #569 Posted August 8, 2019 (edited) I have used the work done by seba to provide vbox on DSM 6.2 with the 4.4.0 kernel. I have compiled it for apollolake only so far and it works. https://github.com/dan-pure/virtualbox4dsm/releases/download/6.0.8-130520.1-k4.4.0/virtualbox4dsm-apollolake-6.0.8-130520.spk Edited August 8, 2019 by MajorTruEvil Quote Link to comment Share on other sites More sharing options...
zeratul75 Posted August 27, 2019 Share #570 Posted August 27, 2019 dsm 6.1.7 here. I installed virtualbox version posted here and seems to work, at least it starts without any error. I am trying to set up a virtual machine with windows 7 32bit started, because it is very light. I am using the same iso used to install in dsm virtual machine manager and it works fine. But in virtualbox I can't even see the loading of virtual cd rom and windows installer setup. What am I doing wrong? Tryed every possible changing in options, cpu, disk controller, video, ecc.....everything.....but I cannot see loading of windows virtual cd...... any idea guys? the system hangs on windows logo, but not going on at all. the system is an asrock j3710 with 8gb ram so it should work fine, as it does with syno virtual machine manager Quote Link to comment Share on other sites More sharing options...
mdcobra Posted September 11, 2019 Share #571 Posted September 11, 2019 I'm using the bromolow version 6.0.8 package on DSM 6.2.2-24922, it works but i've got the following problem: When I want to create a host-only network in preferences phpVirtualbox locks and even DSM is unreachable. It somehow seems to disrupt the networking. After a reboot DSM and phpVirtualbox are reachable again and no host-only network is created. I'm not sure in what log file to look for problems. Quote Link to comment Share on other sites More sharing options...
kretzu77 Posted October 22, 2019 Share #572 Posted October 22, 2019 I can't remotely access the virtual machine: The address for remote connection is 127.0.0.1:9000 and it is not reachable, of course. Do you have any idea how to solve this please? I attached VirtualBox network and VM remote option Quote Link to comment Share on other sites More sharing options...
bearcat Posted October 22, 2019 Share #573 Posted October 22, 2019 7 hours ago, kretzu77 said: I can't remotely access the virtual machine: The address for remote connection is 127.0.0.1:9000 and it is not reachable, of course. There is no place like 127.0.0.1 ... Then, to be able to access it you must: 1 - Change IP 2 - Add a route to the new IP from "the outside". Quote Link to comment Share on other sites More sharing options...
kretzu77 Posted October 23, 2019 Share #574 Posted October 23, 2019 (edited) I don't now how to change it in php virtualbox In the old days, the was the same with dsm and i just did the port fw in router for 9000. In dsm web server maybe? There is no entry in web server - virtual host. Or in virtual box host network options? When I said outside I ment ouside dsm but in the same LAN. Edited October 23, 2019 by kretzu77 Quote Link to comment Share on other sites More sharing options...
bearcat Posted October 23, 2019 Share #575 Posted October 23, 2019 (edited) @kretzu77 How do you supply your VMhost and your virtual Ubuntu with IP? Static or DHCP? 127.0.0.1 is the "local loopback" adress pointing your local virtual host to itself, for any other clients to be able to reach it they will need to address the "external" IP (real IP) of the VM host, and the VMhost must know how to forward the request to your virtual Ubuntu. Edit: Disclaimer: I do not use Virtualbox (or know it that well), but I do know a few thing's about IP networking Edited October 23, 2019 by bearcat Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.