Jump to content
XPEnology Community

BUFFALO TeraStation TS5800D


headrat

Recommended Posts

Hi,

 

Picked up a BUFFALO TeraStation TS5800D dirt cheap (with 24TB of discs), just wondered if this would be capable of running XPenology?

 

y4mAt3BXg-Es_CaIzXdfbY4qUqb1J2R7SuB_h_xT

 

Currently it's running a a "backup" for my main NAS but the Buffalo software is horrible ;)

 

Cheers


HEADRAT

Edited by headrat
Link to comment
Share on other sites

The TS is relatively old. Intel D2700 Cpu, 2GB Ram and an Intel WG82574L Nic. I doubt that you can run one of the newer loaders/Dsm versions on it. Maybe 1.02b...

 

You‘ll have to modify the Bios settings of your TS. To gain entry, power down your TS, connect a keyboard to the usb port, monitor to vga and your boot stick to another usb port. Power it on and press F2 or F7 repeatedly. Set your boot stick as the primary boot device. Save, exit and see if it’s working.

 

 

Link to comment
Share on other sites

  • 5 months later...

I know this is an old thread , but I’m posting here to confirm that DSM works just fine if these machines, even 6.2.2.

 

I have the TS5400D (4-bay, Atom D2550). It can be upgraded to 4GB RAM, but I’ve never seen it use even 1GB. I’m guessing if you try to run a bunch of dockers it will struggle but it’s just fine as a file server.

 

Install process is a little involved for 6.2+ but doable. I’ll try to post more details when I’m all dialed in.

  • Thanks 1
Link to comment
Share on other sites

  • 5 months later...

Hi, I have a TeraStation WS5600D currently running OMV but I would like to install DSM on it. Tried to install using 1.03 loader but I can not find it on the network to continue the process. 

 

Any suggestions witch loader/DSM to use (or even more helpful the steps to do it)?

 

Thanks

Link to comment
Share on other sites

14 hours ago, Augustin said:

Hi, I have a TeraStation WS5600D currently running OMV but I would like to install DSM on it. Tried to install using 1.03 loader but I can not find it on the network to continue the process. 

 

Any suggestions witch loader/DSM to use (or even more helpful the steps to do it)?

 

Thanks

Try the 1.02b loader & DSM 6.1

Link to comment
Share on other sites

On 7/19/2020 at 12:20 PM, IG-88 said:

if its running omv you could provide information about the hardware with

lspci -k

 

 

Sorry it took a little to long to reply, got carried away by the success of installing DSM 6.1 with the loader 1.02b. Just put back OMV on it so I can run the command you mentioned and this is the output:

root@OMV-Buffalo:~# lspci -k
00:00.0 Host bridge: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller (rev 04)
        Subsystem: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 0b)
        Subsystem: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller
        Kernel driver in use: gma500
        Kernel modules: gma500_gfx
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
        Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
        Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
        Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
        Subsystem: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
        Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4
        Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
        Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
        Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
        Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
        Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
        Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
        Subsystem: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
        Subsystem: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
        Subsystem: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
        Kernel driver in use: ahci
        Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
        Subsystem: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801
02:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03)
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci
03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
        Subsystem: Intel Corporation 82574L Gigabit Network Connection
        Kernel driver in use: e1000e
        Kernel modules: e1000e
04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
        Subsystem: Intel Corporation 82574L Gigabit Network Connection
        Kernel driver in use: e1000e
        Kernel modules: e1000e
root@OMV-Buffalo:~#

As mentioned before loader 1.02b/DSM6.1/ds3615 installs and runs perfectly but with loader 1.03b for ds3615_6.2 was unable to find it on the network at first boot so unable to start installing DSM. Would like to use a newer version of DSM if possible. Thank you for taking the time to look into my issue.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...