Jump to content
XPEnology Community

DSM 6.2.2-24922 Update 3


jamkiki72
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - eMini LR-SKLUL2 (Intel Core i5-6200U) OEM mb from AliExpress w/ Realtek RTL8111F GBe

- Additional comment: Manual reboot required. I waited until the 10 minute timer after the update ran out and power cycled the computer manually. It didn't restart by itself.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 - FIRST INSTALL

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  ASRock D2550 ITX

- Additional comment: None

 

DS918.JPG

  • Like 1
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  ASRock B75 PRO3-M (NIC: PCIe Intel Pro 1000 working, NIC: RTL 8111 not working, Sata 4-port controller Marvell-88SE9215)

- Additional comment: MBR boot installation neccessary, Migration from Loader 1.02b (UEFI) and DS3617, as upgrade from DS3617 6.1.7 to 6.2.2 doesn´t work with my Test HD

Link to comment
Share on other sites

- Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.2-24922 Update 3 - FIRST INSTALL

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Z230 (Xeon E3-1245 v3 - 8GB - NIC: I217-LM)

- Additional comment: After DSM was copied to the machine, it wouldn't be detected on the network by Synology Assistant or respond to web UI address.

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -Asus B250m-C Pro- G4560 with 16gb- NIC: HP NC360T

- Additional comments: reboot required

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1 23824 update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - VMware ESXI 6.7, E1000E NIC

- Additional comments: Updated right from the GUI without issue. System had to be rebooted 3 times manually following the update and the 10 minute countdown within the web interface. After first reboot, still couldn't ping device and not found by find.synology. Second reboot, could ping the device for about 2-3 minutes but couldn't login then pings dropped. Third reboot, device came up perfectly with all settings intact and all tested features working (iSCSI, Surveillance Station, and the basics). Woot.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2-23739
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP Microserver N54L with embedded NIC
- Additional comments: Added an HP NC360T NIC

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- D SM version prior update: DSM 6.2.2-24922  update 3- FIRST INSTALL

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: YES - real3x's extra.lzma

- Installation type: BAREMETAL - ASRock h110m-DGS r3.0- G4620- 4gb- NIC: PCIe Intel Gigabit CT EXPI9301CT working, Realtek R8111H  working.

- Additional comment: HW and SW working

SynoGood.PNG

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM -6.2.2-23739, then on DSM 6.2.2-24922  UPDATE 3 - FIRST INSTALL of DSM 6.2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL install -  HPML10v1 Server with Intel G1610T 8GB RAM, using Built in HP B120i AHCI mode. 4 x 3TB + 120GB SSD for DSM. Manage to “Fluked it” LOL and managed to get latest UPDATE 3. Trick was once I installed the 6.2.2-23739.pat. After reboot and shutdown. I removed my SSD and deleted all partitions. Plugged back in then it allowed me to apply the latest 6.2.2-24922 UPDATE 3. After that I plugged in the 4 x 3TB.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Microserver Gen 7 N54L

- Additional comments: restart + shutdown NOT working (had to hard power-off after update or any restart/shutdown)Extra HP NC365T Quad Gigabit PCI-E Card working / Onboard NIC not working

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Microserver Gen 8

- Additional comments: restart + shutdown  NOT working (had to hard reset after update or any restart)Extra HP NC365T Quad Gigabit PCI-E Card working / Onboard NICs not working

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Microserver Gen 8

- Additional comments: restart + shutdown  NOT working (had to hard reset after update or any restart) / Extra Intel Gigabit PCI-E Card working / Onboard NICs disabled

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: Jun's Loader v1.03b DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM - VMware ESXI 6.7 U2, E1000E NIC

- Additional comment: Take a snapshot before system updating.

Two manually reboots required, during the initial automatically reboot, system will update to 6.2.2-24922 and can not login web console. After that system try to install 6.2.2-24922 update 3 from 6.2.2-24922, wait 3 mins then manually reboot. Use ping to check network connection then manually reboot, system will update properly and welcome to 6.2.2-24922 U3

Edited by Polanskiman
No point in mentioning DSM's version after upgrade. Read the thread title!
Link to comment
Share on other sites

  • 2 weeks later...

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 1

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  ASUS Z170i Pro Gaming / G4400

- Additional comments: automatic dual reboot during update; onboard I219V works like a charm!

Edited by Polanskiman
No point in mentioning DSM's version after upgrade. Read the thread title!
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP GEN8, Xeon E3-122L v2, Intel E1G44ET Pro/1000 ET Quad Port PCI-E

- Additional comments: OnBoard NIC Disabled, Intel E1G44ET Pro/1000 ET Quad Port PCI-E

Edited by Polanskiman
No point in mentioning DSM's version after upgrade. Read the thread title!
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 2
- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - MSI H110M-VH PLUS | NIC: Realtek RTL8111H Gigabit LAN controller | Intel G4400
- Additional comments: EVERYTHING WAS SMOOTH

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Z230 (Xeon E3-1245 v3 - 8GB - NIC: HP NC360T)

- Additional comments: Needed to add HP NC360T NIC instead of using onboard I217-LM NIC.

Edited by Polanskiman
No point in mentioning DSM's version after upgrade. Read the thread title!
Link to comment
Share on other sites

  • Polanskiman unfeatured this topic
  • 5 months later...

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-6

- Loader version and model: JUN'S LOADER v1.04 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  Custom hardware: i5-5400, 16gb ram, intel nic

- Additional comments: all works great, previous update is 6.2.2-24922 Update 3 - works too.

Screenshot_11.png

Link to comment
Share on other sites

  • 1 year later...

 Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock QC5000M-ITX/PH ( AMD a4-5000)

- Additional comment: reboot required

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...