Polanskiman

Please read the READ ME topic before posting:

 

Message added by Polanskiman

Recommended Posts

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 2

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Core i3-8100t   GIGA-BYTE  H370 AORUS GAMING 3 WIFI

- Additional Comment: Reboot required

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 2

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - No, but - ASRock J4105-ITX, RAM 8GB, SSD WD 500GB;  Powerman ME-100 60W  Win10 + VMWare WS Player 15 + 918DSM

- Additional Comment: Reboot required

 

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 2

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Yes, ASRock E3C226D2I, Xeon E3-1285L v3, RAM 16 GB;  4TB*3 WD Blue; SSD WB Blue 500GB; Ablecom CS-M50 250W; UPS Ippon 650

- Additional Comment: Reboot required

Share this post


Link to post
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.2-24922U2

- Loader version and model: Jun v1.04b - DS918 plus real3x mod

- Using custom extra.lzma: YES, see above

- Installation type: BAREMETAL - ASRock J4105-ITX

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Supermicro X10SL7-F; Xeon E3-1241 v3 CPU; 16 GB ECC (2 x 8 GB DDR3); 2xGBE +1IPMI_LAN port; 6 SATA (2xSATA3 (6GB/s) & 4xSATA2 (3GB/s); 8 SAS (L-SAS 0-7 supported by LSI2308 SAS controller) connected to a total of 10x8TB WD SATA HDDs (8xWD-80EFZX; 2xWD80-EFAX) via standard SATA cables.
- Additional Comment: Reboot required

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: VM - ESXi 6.5u3

- Additionnal comment: reboot required, with manual VM reboot

 

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP N54L G7

- Additionnal comment: HP NC360T PCI Express Dual Port Gigabit Server Adapter, reboot required

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - DELL Optiplex 7010, i5-3470, 8 GB RAM, 2x 4 TB HDD

- Additionnal comment: reboot required

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP N54L G7 - RAM 8 GB, 5x3 TB HDD

- Additionnal comment: HP NC360T PCI Express Dual Port Gigabit Server Adapter, reboot required

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP N54L G7 - RAM 8 GB, 4x4 TB HDD

- Additionnal comment: HP NC360T PCI Express Dual Port Gigabit Server Adapter, reboot required

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: Clean install DSM 6.2.2-24922

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP ProLiant ML10v2

- Additionnal comment: reboot required

 

 

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: Clean install DSM 6.2.2-24922

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP ProLiant ML10v2

- Additionnal comment: reboot required

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM - i5 2400S - ESXi 6.7.0 Build 10764712

- Additional comments: Use 2 x SATA Controller (0 for img, 1 for LSI RAID 9Tb Array); NIC: E1000E - Manually downloaded the update from critical updates (does auto install work anyone? Never risked it before)

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - ASRock C2550D4I

- Additionnal comment: Restart required.  Intel X540-T2 continues to work fine.

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: Jun's Loader v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK Z370M PRO4 - i5-8600k - Giga PHY Intel® I219V

- Additional comments: Reboot required

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: Jun's Loader v1.03b DS3615

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP microserver g8 gt1610

- Additional comments: Reboot required

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 2

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: VM - Proxmox 5.4.5 KVM (used standard Intel E1000 NIC with 1.04b loader; no need to change to E1000E)

- Additional Comment: Reboot required 

Share this post


Link to post
Share on other sites

Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-update 2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP Microserver Gen 8
- Additional comments:  HP NC360T NIC (on board NIC disabled)

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP N54L G7

- Additionnal comment:  NIC Intel Dual Port Gigabit, reboot required

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 2

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: No

- Installation type: BAREMETAL - DELL PowerEdge T30 (Intel Xeon)

- Additional comments: Reboot required

Share this post


Link to post
Share on other sites

Outcome of the update:  SUCCESSFUL

- DSM version before update: DSM 6.2.2-24922 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Dell Optiplex 980

- Additional comments: reboot required all okay.

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 2
- Loader version and model: Jun's Loader v1.04b DS918+
- Using custom extra.lzma: YES - extra without i915.ko drm_kms_helper.ko drm.ko and i915 fw
- Installation type:  BAREMETAL - GA-J3455N-D3H 
- Additional comments: 1 reboot required - onboard LAN is ok - HW transcode is ok

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-update 2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: VM - ESXi 6.7.0 update 2 Build 13006603 (on HP Microserver Gen)
- Additional comments:  Passthrough of SATA controller. NIC: E1000e. ESXi installed on SSD on secondary PCI-E SATA controller. Updated through auto install.

Share this post


Link to post
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM | ESXi 6.7.0 Update 2 (Build 13981272)

- Additional comments: Remove USB 2.0 controller and add USB 3.0 controller. Reboot required.

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP N54L G7

- Additionnal comment:  Intel I210-T1 PCIE-NIC

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L with NC360T

- Additional comments: internal NIC deactivated within BIOS settings

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 2

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3455 ITX

- Additional comments: same as everytime: automatic restart is not working, need to restart manually

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.1-15284 Update 3

- Loader version and model: Jun v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Acer AC100 - RAM 4Gb DDR3 ECC - Intel Core i3 2120 - Integrated LAN Intel PHY 82579LM

- Additional Comment: Reboot required - Onboard LAN OK with 1.03b but add a HP NCT360P (want to use the 1.04b loader for 918+ but i3 2120 is not an Haswell processor...). All works like a charm... Thank's Jun 😀

Share this post


Link to post
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922 Update 2

- Loader version and model: Jun v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: UNRAID - ASRock H370M itx/ac - RAM 32Gb DDR4 NON-ECC - Intel Core i5 9400F - Passthrough Integrated LAN Intel I211

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update:DSM 6.2.2-24922 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L gen7 + Intel NIC

- Additional comment: Reboot required

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update:DSM 6.2.2-24922 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver g8 + Intel NIC

- Additional comment: Reboot required

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.