Jump to content
XPEnology Community

DSM 6.2.2-24922 Update 3


jamkiki72
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

updt3.jpg

 

https://www.synology.com/en-global/releaseNote/DS3615xs

Spoiler

Version: 6.2.2-24922-3
(2019-08-21)

Important Note

1.The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
2.This update will restart your Synology NAS.

What's New

1.Updated the protocol of Let's Encrypt to ACME V2 to enhance the stability of the registration process.

Fixed Issues

1.Fixed the issue where the system might be unable to install a package during first time installation.
2.Fixed the issue where shared folders could not be accessed via the SMB protocol if the smb.conf file was manually modified for Final Cut Pro X.
3.Improved the performance of the SMB protocol by reducing CPU usage when Synology NAS joins a domain.
4.Fixed the issue where Integrated Windows Authentication (IWA) might not work again if the protocol has been disabled before.
5.Fixed the issue where the LED indicators on the drive slots of RS4017xs+ and RS2818RP+ might not work properly.
6.Adjusted the notification mechanism to comply with the latest Gmail API.
7.Fixed the issue where duplicate entries of the same login event might be recorded at Log Center.
8.Fixed the issue where applying non-default date formats at personal settings might result in additional date information being displayed.
9.Fixed the issue where adding a Synology NAS to CMS host might result in a frozen "Checking" status and the device would not be added successfully.
10.Fixed the issue where the storage capacity of a volume could not be expanded after it was migrated to a new Synology NAS with its corresponding SSD cache.

 

Edited by Polanskiman
Edited to comply with READ ME topic. Please read it next time!
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP Compaq Elite 8300 SFF , integrated Intel 82579LM NIC
- Additional comments: "HYBRID" partition table usb key, UEFI boot disabled in BIOS, reboot required

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: Bare Metal, Supermicro X10SRi-F, integrated NICs Intel but disabled, Intel Pro/1000 PT (EXPI9400PTBLK listed as 82572)

- Additional comments: Computer needs to be booted in Legacy BIOS mode and I confirmed the Intel 82572 chipset uses Intel e1000e drivers.

  • Like 1
Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXI 6.5u3 on HP DL380p G8, LSI 2116 w/SAS drives (mapped as raw drive to SATA1:x in the VM)

- Additional comments: Make sure USB 2.0 controller is removed or changed to USB 3.0, and NIC type is E1000e BEFORE update.  The update only showed up on Synology's site after I went to the upgrade path tool and set it to upgrade from 6.2.2-23739 to 6.2.2.24922.  It then had 6.2.2.24922 as first step and then 6.2.2.24922-3 as second step.

xpenology.png

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - Intel W2600CR2, E5-2660x2  - vSphere 6.7.0.2000, ESXi 6.7.0 Build 10302608

- Additional comments: Use 2 x SATA Controller (0 for img, 1 for others); NIC: E1000E

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM - Intel W2600CR2, E5-2660x2  - vSphere 6.7.0.2000, ESXi 6.7.0 Build 10302608

- Additional comments: Use 2 x SATA Controller (0 for img, 1 for others); NIC: E1000E

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.2-24922 Update 2

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: YES

- Installation type: BAREMETAL - ASRock Q1900-ITX

- Additional comments: i used the real3x mod; no need to remove extra2.lzma; external intel e1000e nic; internal nic disabled

Link to comment
Share on other sites

Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port 

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: VM - HP ML310 v2 (1220v3/32GB) VMWare ESXi 6.0 Update3 + RDM/USB Disable/NIC E1000e)
- Additional comments: REBOOT REQUIRED

 

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 2
- Loader version and model: JUN'S LOADER v1.04b - DS918+
- Using custom extra.lzma: NO
- Installation type: VM - HP ML310 v2 (1220v3/32GB) VMWare ESXi 6.0 Update3 /USB Enable/NIC vmxnet3)
- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MB: Asrock B250M-HDV - crossflashed Dell Perc H200 to LSI 9211-8i - HP NC360T (dual ports nic) 

- Additional comment: reboot required

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-update 2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP Microserver gen.8 with Intel Xeon
- Additional comments: HP E1000e NIC

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 2
- Loader version and model: JUN'S LOADER v1.03b - DS3617xs
- Using custom extra.lzma: NO
- Installation type: Proxmox 5.4 - Supermicroboard with Intel E3-1260L
- Additional comments: virtual E1000E NIC

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - AMD Gigabyte GA-970A-DS3P AMD FX-4300

- Additional comment: reboot required | NIC: HP NC-360T

Link to comment
Share on other sites

- Outco me of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Lo ader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte GA-H110m DS2 - i7 6700

- Additional comments: restart + shutdown  Ok,  onboard NIC disabled, Intel PRO 1000 NIC, CPU Temperature not shown (always at 40°)

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - Supermicro X7SPA-HF-D525
- Additional comments: with onboard NIC

 

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 2
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: VM - Proxmox 5.4 - Supermicroboard X11SSH-LN4F with Intel E3-1260L
- Additional comments: virtual E1000E NIC

Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 2

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Supermicro X8DTI-F / NIC: Intel 82576 Dual-Port Gigabit Ethernet, plus an Intel EXPI9301CTBLK PRO1000 Network Card CT PCIex / Chipset: Dual Intel E5620 Xeon / SATA Additional Controllers: Lindy 4 port SATA 3 PCIe /  Disks: 8 x 4TB WD Red, 2 x 256GB SSD

- Additional comments: After reboot everything recognised and working

Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 2

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Chinese x79a1 MB / E5 1620 v2 / 32GB ECC / HP NC360T NIC / LSI 9220-8i  /  Disks: 8 x [4TB,3TB,2TB] motley mix of HDD, 2 x 256GB SSD

- Additional comments: After reboot everything recognised and working

Edited by baratta930
Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 2

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL- Gigabyte GA-B85M-D3H (rev. 1) - NIC Realtek onboard

- Additional comments: After reboot everything recognised and working

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 Update 2

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: YES (from real3x somewhere in this forum)

- Installation type: BAREMETAL - ASRock Q1900B-ITX with enabled Realtek 8111GR onboard NIC

- Additional comments: After reboot everything recognised and working!

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 2
- Loader version and model: Jun's Loader v1.04b DS918+
- Using custom extra.lzma: YES - extra without i915.ko drm_kms_helper.ko drm.ko and i915 fw
- Installation type:  BAREMETAL - GA-J3455N-D3H 
- Additional comments: 1 reboot required - onboard LAN is ok - HW transcode is ok

extra.lzma

Edited by Polanskiman
Non-complaince with READ-ME topic. Added custom lzma
  • Thanks 2
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.2-24922 Update 2

- Loader version and model: JUN'S LOADER v1.04b - DS918

- Using custom extra.lzma: No

- Installation type: BAREMETAL -  Mini Size Intel I3 5005u(ES)  with 4*RTL 8111F all in one  

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922-2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock QC5000M-ITX/PH ( AMD a4-5000)

- Additional comment: reboot required

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...