jimware Posted November 10, 2014 Share #176 Posted November 10, 2014 Can anyone help with wol on this mobo? Link to comment Share on other sites More sharing options...
unmesh Posted November 12, 2014 Share #177 Posted November 12, 2014 Hello, my name is yosus and I'm new on this forum, I want to thank everyone for the support and I hope someone can help me. I'm trying to build a NAS using this motherboard and xpenology. I've create the usb drive and boot from it using nanoboot, then select "Synology DSM 5.0 (upgrade/Degrade)" and then "Synology DSM 5.0-4493" (or other version). My problem is nic seems not to be recognized since I have the message "eth0 not RUNNING". What do i have to do to make ethernet being recognized? Thanks Which version of nanoboot? And are you using the defaults or did you edit any of the files? Link to comment Share on other sites More sharing options...
petben Posted November 14, 2014 Share #178 Posted November 14, 2014 Hello, I'm going to build my first NAS based on Q1900 with XPEnology OS and I would like to ask you which motherboard has lower power consumption - Asrock Q1900-ITX (with 80PLUS Gold PSU) or Q1900DC-ITX (with power supply from old laptop). In both cases I will use 2pcs of WD Red 3TB (Raid 1) and 1pc of 4GB of RAM module. Thanks, Petben Link to comment Share on other sites More sharing options...
Schnapps Posted November 14, 2014 Share #179 Posted November 14, 2014 Hello,I'm going to build my first NAS based on Q1900 with XPEnology OS and I would like to ask you which motherboard has lower power consumption - Asrock Q1900-ITX (with 80PLUS Gold PSU) or Q1900DC-ITX (with power supply from old laptop). In both cases I will use 2pcs of WD Red 3TB (Raid 1) and 1pc of 4GB of RAM module. Thanks, Petben It doesn't matter. You can use a 1200W PSU and (theoretically) the energy consumption is the same as a 90W DC "power supply" What it does matter, is that the PSU gives the right amount of power that the hardware needs. For example, a 4x 4TB HDD with 2x DIMM RAM cards and 1x PCIe card with 2 SSDs consume 40W. If the DC power supply is 90W. So it should work just fine. Link to comment Share on other sites More sharing options...
XPEH Posted November 14, 2014 Share #180 Posted November 14, 2014 It doesn't matter. You can use a 1200W PSU and (theoretically) the energy consumption is the same as a 90W DC "power supply" To be more precise there is some lost of power on "idle" in any power supply. 1200W PSU will waste more. The ideal power supply that has just a little more than maximum possible power output required, but not too excessive. Link to comment Share on other sites More sharing options...
Elpee Posted November 15, 2014 Share #181 Posted November 15, 2014 ... 1200W PSU will waste more. Are you sure? You're so sensitive. Link to comment Share on other sites More sharing options...
jimware Posted November 15, 2014 Share #182 Posted November 15, 2014 Did not find the answer for that, so still using gnoboot. Up and running with update 4! Kasteleman because i have same problem but the wol for me is very important can you help me how to install 4493 with update 4 on gnoboot? Thank you in advance. Link to comment Share on other sites More sharing options...
kasteleman Posted November 15, 2014 Share #183 Posted November 15, 2014 Used the same procedure as with nanoboot. Use the sed part etc. Die not test update 5 and above! Link to comment Share on other sites More sharing options...
petben Posted November 15, 2014 Share #184 Posted November 15, 2014 It doesn't matter. You can use a 1200W PSU and (theoretically) the energy consumption is the same as a 90W DC "power supply" What it does matter, is that the PSU gives the right amount of power that the hardware needs. For example, a 4x 4TB HDD with 2x DIMM RAM cards and 1x PCIe card with 2 SSDs consume 40W. If the DC power supply is 90W. So it should work just fine. I found this - http://www.asrock.com/mb/Intel/Q1900DC-ITX/ "DC Adapter Saves More Energy Compared to other counterparts, this motherboard is powered by DC adapter and able to reduce power consumption by a maximum of 50% when idle and 38% at full loading! Without traditional PSU, you can save a lot of energy and be more friendly to our environments." This looks like BIG difference. Link to comment Share on other sites More sharing options...
jimware Posted November 15, 2014 Share #185 Posted November 15, 2014 Used the same procedure as with nanoboot. Use the sed part etc. Die not test update 5 and above! Sorry but am new to xpenology. What is sed? The protection that unmount the volumes? Link to comment Share on other sites More sharing options...
kasteleman Posted November 15, 2014 Share #186 Posted November 15, 2014 Read the usual upgradeprocedure for nanoboot in this forum. I used the exact same. First download the upgradefile, but don't install it. Then you have to execute some command with sed in it and then upgrade. As said before: read the upgrade procedure for nanoboot. Link to comment Share on other sites More sharing options...
jimware Posted November 15, 2014 Share #187 Posted November 15, 2014 Read the usual upgradeprocedure for nanoboot in this forum. I used the exact same. First download the upgradefile, but don't install it. Then you have to execute some command with sed in it and then upgrade. As said before: read the upgrade procedure for nanoboot. OK I will. Thank you very much for the help. Link to comment Share on other sites More sharing options...
MarsManden Posted November 15, 2014 Share #188 Posted November 15, 2014 Sorry but am new to xpenology. What is sed? The protection that unmount the volumes? Just a simple way to edit a tiny text-file used when applying an update to DSM. http://en.wikipedia.org/wiki/Sed Link to comment Share on other sites More sharing options...
NorrOn Posted November 17, 2014 Share #189 Posted November 17, 2014 Can anyone help with wol on this mobo? I got WOL working by permanently editing the GRUB command line. After editing it looks like this: kernel /zImage ihd_num=0 netif_num=4 syno_hw_version=DS3612xs sn=xxxxxxxxxx mac1:xx:xx:xx:xx:xx:xx vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 rmmod=r8169 insmod=r8168 Link to comment Share on other sites More sharing options...
jimware Posted November 17, 2014 Share #190 Posted November 17, 2014 Can anyone help with wol on this mobo? I got WOL working by permanently editing the GRUB command line. After editing it looks like this: kernel /zImage ihd_num=0 netif_num=4 syno_hw_version=DS3612xs sn=xxxxxxxxxx mac1:xx:xx:xx:xx:xx:xx vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 rmmod=r8169 insmod=r8168 It's working!!! Thank you very much for your help!! You are great my friend! Link to comment Share on other sites More sharing options...
philsrb Posted November 20, 2014 Share #191 Posted November 20, 2014 hELLO EVERYONE, I have 2 Xpenology systems up running...one with an intel nic, and another one with a realtek 8111 nic which is the common enumerator in this whole story...i experienced the same problems with woo and network speeds! i defiately have NO hdd bottlenecks as both dams are running 6 disks in raid and also have ssds...did testing and i have 120mb/s on the intel nic over cable...thats about the maximum a gigabit connection can handle...whereas on the realtek i have 35-max45 but very wobbly, probably the average would be around 25...it definitely IS slow...also WOL aint working. i have inserted sinology mac ids on both systems in dam as i had 2 sync stations lying around which i am not using anymore...on intel wake on lan will work with the sinology mac adress! meaning if i enter the mac dress of the sinology i had it will turn on! on realtek it will not work, neither when setting its real mac nor when using anotherone. right now running lspci -v show it is loading the r8169 driver. i am guessing hoping that it is a driver issue that can be solved...i can in fact live without wol but not with those transfer speeds what did you do to fix wol? maybe this will fix the transfer speeds issue too... did you add this rmmod=r8169 insmod=r8168 to use the older driver? Link to comment Share on other sites More sharing options...
NorrOn Posted November 25, 2014 Share #192 Posted November 25, 2014 hELLO EVERYONE, I have 2 Xpenology systems up running...one with an intel nic, and another one with a realtek 8111 nic which is the common enumerator in this whole story...i experienced the same problems with woo and network speeds! i defiately have NO hdd bottlenecks as both dams are running 6 disks in raid and also have ssds...did testing and i have 120mb/s on the intel nic over cable...thats about the maximum a gigabit connection can handle...whereas on the realtek i have 35-max45 but very wobbly, probably the average would be around 25...it definitely IS slow...also WOL aint working. i have inserted sinology mac ids on both systems in dam as i had 2 sync stations lying around which i am not using anymore...on intel wake on lan will work with the sinology mac adress! meaning if i enter the mac dress of the sinology i had it will turn on! on realtek it will not work, neither when setting its real mac nor when using anotherone. right now running lspci -v show it is loading the r8169 driver. i am guessing hoping that it is a driver issue that can be solved...i can in fact live without wol but not with those transfer speeds what did you do to fix wol? maybe this will fix the transfer speeds issue too... did you add this rmmod=r8169 insmod=r8168 to use the older driver? I used this tutorial to get WOL working: http://www.xpenology.nl/wake-on-lan/ I changed to the older driver r8168 because r8169 doesn't support WOL on the Realtek 8111, this is indeed a driver issue. ethtool -i eth0 driver: r8168 version: 8.038.00 firmware-version: bus-info: 0000:03:00.0 Link to comment Share on other sites More sharing options...
oz666 Posted December 2, 2014 Share #193 Posted December 2, 2014 Hi all, Seems that ESXi works if you install another video card. Can someone test and confirm...I'm thinking of ordering this MB. https://communities.vmware.com/thread/4 ... 5&tstart=0 Thank you. Link to comment Share on other sites More sharing options...
Schnapps Posted December 3, 2014 Share #194 Posted December 3, 2014 Hi all, Seems that ESXi works if you install another video card. Can someone test and confirm...I'm thinking of ordering this MB. https://communities.vmware.com/thread/4 ... 5&tstart=0 Thank you. Knowing that since some time BUT unfortunately, this specific MB doesn't have a GPU slot and therefore, you cannot install a GPU on it. What you could try, is to update its BIOS, set it up as for "production" with all BIOS settings, pull out the HDD/SSD used for installing ESX, and do the installation on another computer where you have a GPU. After ESX is installed, you can migrate the HDD/SSD back to the NAS and boot as usual. For me it worked just fine with this procedure but anyhow I like HyperV a lot more and I stick to it as it offers me more options. Cheers! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
oz666 Posted December 4, 2014 Share #195 Posted December 4, 2014 Hi all, Seems that ESXi works if you install another video card. Can someone test and confirm...I'm thinking of ordering this MB. https://communities.vmware.com/thread/4 ... 5&tstart=0 Thank you. Knowing that since some time BUT unfortunately, this specific MB doesn't have a GPU slot and therefore, you cannot install a GPU on it. What you could try, is to update its BIOS, set it up as for "production" with all BIOS settings, pull out the HDD/SSD used for installing ESX, and do the installation on another computer where you have a GPU. After ESX is installed, you can migrate the HDD/SSD back to the NAS and boot as usual. For me it worked just fine with this procedure but anyhow I like HyperV a lot more and I stick to it as it offers me more options. Cheers! Sent from my iPhone using Tapatalk Why do you say it doesn't have a GPU slot ? PCIe 2.0 x1 can't be used ? by the way, salutari tovarase Bucurestean Link to comment Share on other sites More sharing options...
Schnapps Posted December 4, 2014 Share #196 Posted December 4, 2014 Dang nigga! Apparently there are some GPUs that use PCIe X1. Mostly probable hard to get :-/ Hai noroc! Link to comment Share on other sites More sharing options...
chege Posted December 4, 2014 Share #197 Posted December 4, 2014 Dang nigga!Apparently there are some GPUs that use PCIe X1. Mostly probable hard to get :-/ Hai noroc! You can always buy cheapest GPU on slot PCI-e x8 and cut it to match to slot x1. You dont need x8 speed under ESXi so its cheap and quick solution. Link to comment Share on other sites More sharing options...
bartgrefte Posted December 9, 2014 Share #198 Posted December 9, 2014 Has anyone tried building a NAS with one of these boards and more than 4 (let's say up to 6) 3.5" hard drives? I'm curious if that would be possible, from a power usage point of view. From what I've read, the Q1900DC can power 4 drives, however, I do not now if that's the actual limit. And what about the Q1900 with a PicoPSU? I don't know if PicoPSU's can handle the startup current of that number of drives. (Note: I'm not looking at standard ATX power supplies because those do not have a DC input.) Link to comment Share on other sites More sharing options...
pyriah Posted December 9, 2014 Share #199 Posted December 9, 2014 Works WOL on nanoboot or gnoboot ?? ( q1900DC ) Link to comment Share on other sites More sharing options...
sgt.luk3 Posted December 11, 2014 Share #200 Posted December 11, 2014 I need some help guys... I have a new NAS (ASROCK Q1900-ITX, 4GB Crucial DDR3 SO-DIMM, BeQuiet SystemPower 7 300Watt and a Fractal Design Node 304). Everything's working fine but not the USB 3.0. I installed the latest BIOS (1.40) and configured the BIOS as fufik65 said : Hello tomcarmen,bios setting is very easy,latest version 1.20.ADVANCED-SUPER IO CONFIGURATION..disable serial ans paraller port.ADVNACED-USB COnFIGURATION...all enable.BOOT-CSM...enable and all set to LEGACY.Good luck Then I updates Nanoboot to 5.0.3.2 and DSM to 5.0 4528. After that I installed Update 1 and Update 2. But no chance...USB 3.0 ist still dead. No USB stick or HDD is working on the ports. Neither directly on the board on the backside of the case nor at the frontpanel. Has someone any idea what to do? Link to comment Share on other sites More sharing options...
Recommended Posts