tomcarmen Posted July 15, 2014 Author Share #51 Posted July 15, 2014 For me everything works fine(everything which is not Synology bound)I still not fixed my USB issue. I still cannot see the USB drives although I have latest bios and the "correct settings" mentioned by one user Sent from my iPhone using Tapatalk which version of bios do you have? nano version? and dsm? Link to comment Share on other sites More sharing options...
tomcarmen Posted July 16, 2014 Author Share #52 Posted July 16, 2014 Hello everyone on your mother board does wol you? I can not do ... Link to comment Share on other sites More sharing options...
Schnapps Posted July 16, 2014 Share #53 Posted July 16, 2014 WOL is working Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
tomcarmen Posted July 16, 2014 Author Share #54 Posted July 16, 2014 could you explain how you did it? I have enabled wol bios> pci .... I modified syslinux.cfg for customizing mac address, SN in nanoboot I followed this guide: http://www.xpenology.nl/wake-on-lan/ but it does not work. the lights of the network adapter is not lit when rimangino is off \ in case you need to do in the bios? Cstate, C1E, s5 ..... are two days that I'm trying, but nothing, does not work Link to comment Share on other sites More sharing options...
kasteleman Posted July 16, 2014 Share #55 Posted July 16, 2014 I have this mainboard also running since 2 days. Installed some features, but having the same problem with wol. Running biosversion 1.30 (nice feature of Asrock: update from within bios directly from the internet ) Therefore also looking for a solution as the mentioned guide does not work. Maybe i missed some setting in the bios? Link to comment Share on other sites More sharing options...
tomcarmen Posted July 16, 2014 Author Share #56 Posted July 16, 2014 I still left 1.20. I installed Windows 8.1 on a portable hd I tested the wol ... it all works. so it is not 'a hardware problem but software .... Link to comment Share on other sites More sharing options...
akv Posted July 16, 2014 Share #57 Posted July 16, 2014 Hi, I followed the advise here and bought a Q1900-ITX. I had no issue during the installation, but I also have the issue that the USB does not work. Here is the details: - DSM 5.0-4493 Update 2 - Nanoboot 5.0.3.1 - Bios 1.3 When I do a cat /proc/bus/usb/devices T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 1 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1 P: Vendor=1d6b ProdID=0003 Rev= 3.02 S: Manufacturer=Linux 3.2.40 xhci_hcd S: Product=xHCI Host Controller S: SerialNumber=0000:00:14.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 3.02 S: Manufacturer=Linux 3.2.40 xhci_hcd S: Product=xHCI Host Controller S: SerialNumber=0000:00:14.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 3.02 S: Manufacturer=Linux 3.2.40 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms I also saw in the syslog: Jul 16 22:48:15 Milan hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=0000:00:1d.0 Jul 16 22:48:15 Milan hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000 Jul 16 22:48:15 Milan hotplugd: ##### ACTION:add Jul 16 22:48:15 Milan hotplugd: DEVICE:/proc/bus/usb/000/000 Jul 16 22:48:15 Milan hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Jul 16 22:48:15 Milan hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=0000:00:1d.0 Jul 16 22:48:15 Milan hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000 Jul 16 22:48:15 Milan hotplugd: ##### ACTION:add Jul 16 22:48:15 Milan hotplugd: DEVICE:/proc/bus/usb/000/000 Jul 16 22:48:15 Milan hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Jul 16 22:48:15 Milan hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=0000:00:1d.0 Jul 16 22:48:15 Milan hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000 Jul 16 22:48:15 Milan hotplugd: ##### ACTION:add Jul 16 22:48:15 Milan hotplugd: DEVICE:/proc/bus/usb/000/000 Jul 16 22:48:15 Milan hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list. Jul 16 22:48:15 Milan hotplugd: hotplugd.c:998 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:1d.0 And of course nothing appears when I plug an USB device. Do you know what should be done to get the USB devices recognized? Many thanks! Link to comment Share on other sites More sharing options...
fufik65 Posted July 17, 2014 Share #58 Posted July 17, 2014 About WOL I tried Gnoboot, WOL works .... but unfortunately not Nanoboot Link to comment Share on other sites More sharing options...
tomcarmen Posted July 17, 2014 Author Share #59 Posted July 17, 2014 ok, so it 'a problem of nanoboot .. gnoboot works with everything? Link to comment Share on other sites More sharing options...
fufik65 Posted July 17, 2014 Share #60 Posted July 17, 2014 Yes, but it does not work Hauppauge dvb-t card:-) Link to comment Share on other sites More sharing options...
kasteleman Posted July 17, 2014 Share #61 Posted July 17, 2014 Can i switch from nanoboot to gnoboot? Link to comment Share on other sites More sharing options...
xpenologycacapee Posted July 17, 2014 Share #62 Posted July 17, 2014 Can someone list out idle power usage with picopsu? Link to comment Share on other sites More sharing options...
tomcarmen Posted July 18, 2014 Author Share #63 Posted July 18, 2014 I was thinking of buying a PICOPSU-120-WI-25V DC/DC (120 WATT) or 80W so 'to-use notebook power supplies Link to comment Share on other sites More sharing options...
tomcarmen Posted July 18, 2014 Author Share #64 Posted July 18, 2014 sorry a curiosity. but if I connect the speakers to the sk audio, I can hear the music directly covered by the nas? Link to comment Share on other sites More sharing options...
fufik65 Posted July 18, 2014 Share #65 Posted July 18, 2014 I ordered this picopsu: http://www.aliexpress.com/store/product ... 81097.html Link to comment Share on other sites More sharing options...
kasteleman Posted July 18, 2014 Share #66 Posted July 18, 2014 Hmmm, switched to gnoboot. System booted just fine and wol works Driver now reports: ethtool -i eth0 driver: r8168 version: 8.037.00-NAPI firmware-version: bus-info: 0000:03:00.0 While nanoboot has r8169 2.3 LK NLP. Even if i prevent r8169 from loading and therefore r8168 version 8.038.00-NAPI is loaded, there is no wol possible. So my wol problem is def driver related. I checked my ubuntu system and there is also no wol possible as sone as i use the latest driver r8169 version 8.038.00 for the 8111 networkdevice. So suggesting to change driver in nanoboot towards early 8.037.00-NAPI Link to comment Share on other sites More sharing options...
tomcarmen Posted July 21, 2014 Author Share #67 Posted July 21, 2014 I ordered this picopsu:http://www.aliexpress.com/store/product ... 81097.html you tell us when you arrive and consumption? Link to comment Share on other sites More sharing options...
fufik65 Posted July 21, 2014 Share #68 Posted July 21, 2014 Yes, I will give a report and results Link to comment Share on other sites More sharing options...
momad Posted July 21, 2014 Share #69 Posted July 21, 2014 Hi all, two open questions i have: 1.- Did any one test video transcoding with j1900? I have over 90% cpu usage using plex trancoding t0 my IPAD2. 2.- What about intel cpu speedstep, the j1900 celeron support as far i now Low power frequency 1333 MHz and Turbo frequency 2420 MHz: Can Xpenology deal with that? Thank you! Link to comment Share on other sites More sharing options...
jbugman Posted July 21, 2014 Share #70 Posted July 21, 2014 1) Not unexpected, transcoding requires serious HP and a decent graphics, the j1900 isn't built for transcoding 2) Unless synology have built it into their software no, speedstep is a software application J Link to comment Share on other sites More sharing options...
tomcarmen Posted July 21, 2014 Author Share #71 Posted July 21, 2014 n54l be able to do Link to comment Share on other sites More sharing options...
jbugman Posted July 21, 2014 Share #72 Posted July 21, 2014 But only just and it depends on what your trying to transcode J Link to comment Share on other sites More sharing options...
momad Posted July 21, 2014 Share #73 Posted July 21, 2014 Hi tomcarmen, which cpu load on which transcoding resolution you have with your nl54? Link to comment Share on other sites More sharing options...
tomcarmen Posted July 22, 2014 Author Share #74 Posted July 22, 2014 no sorry, my question was .. i have q1900-itx however I also plex with 98% cpu Link to comment Share on other sites More sharing options...
Schnapps Posted July 22, 2014 Share #75 Posted July 22, 2014 Guys, Plex will use 100% of CPU on any hardware. The difference comes from the time the processor will be at 100%. In the end, more CPU cores at smaller frequency are faster than fewer cores at bigger freq Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts