adicontakt Posted July 26, 2019 #1 Posted July 26, 2019 Hello everybody , I wanna build a nas with this config: Packard Bell Imedia S I3616 NL proc Dual core 2,8 mhz RAM 8 gb Hdd WD red 1tb (just one for the start) I was following an youtube tutorial and everything was fine, when I was finished I noticed that I don"t have Synology Drive this is the tutorial then I was trying to put some diferrent loaders but i doesen"t work , I can"t find the NAS on the network with others loaders can you help me with a loader who is working with dsm 6.2 and some other advice? my english is not so good and here are a lot of information and I cand filter what is good to do 10x guys ! Quote
jensmander Posted July 27, 2019 #3 Posted July 27, 2019 28 minutes ago, adicontakt said: No one? Good start in a forum... It has been 22 hours since you opened your thread and there’s no need to push and ask with „No one?“. Beside that you should read the Faq and forum rules. 22 hours ago, adicontakt said: Packard Bell Imedia S I3616 NL Aaah yes. We all know this PC/board... like thousands of other models. Do you think that users start searching the web for this to get informations about the chipset, CPU, NIC, etc.? Post as much details as possible about your system. We don’t have crystal balls nor do many of us have the will to do your job (searching the web for further and detailed system specs). Provide us with more informations and I think that someone will answer you soon. Cheers 1 1 Quote
haydibe Posted July 27, 2019 #4 Posted July 27, 2019 8 hours ago, jensmander said: On 7/26/2019 at 12:54 PM, adicontakt said: Packard Bell Imedia S I3616 NL Aaah yes. We all know this PC/board... like thousands of other mod 🤣 Quote
jensmander Posted July 27, 2019 #6 Posted July 27, 2019 2 hours ago, adicontakt said: yep ,very funny 😉 So can you give us more details about your system? 1 Quote
adicontakt Posted July 28, 2019 Author #7 Posted July 28, 2019 (edited) Yes sir, I have to install windows to get the full specs of the parts Edited July 28, 2019 by adicontakt Quote
adicontakt Posted July 28, 2019 Author #8 Posted July 28, 2019 Motherboard: CPU Type DualCore Intel Pentium G640, 2800 MHz (28 x 100) Motherboard Name Packard Bell iMedia S2870 Motherboard Chipset Intel Cougar Point H61, Intel Sandy Bridge BIOS Type AMI (08/10/2012) Display: Video Adapter Intel(R) HD Graphics (2076 MB) Video Adapter Intel(R) HD Graphics (2076 MB) 3D Accelerator Intel HD Graphics 2000 Monitor BenQ GW2280 [22" LCD] (ET41K03548SL0) Storage: IDE Controller Standard SATA AHCI Controller Storage Controller Microsoft Storage Spaces Controller Disk Drive Generic- Multi-Card USB Device Disk Drive USB FLASH DRIVE USB Device Disk Drive WDC WD10EFRX-68JCSN0 (1 TB, 5400 RPM, SATA-III) SMART Hard Disks Status OK Network: Network Adapter Intel(R) 82579V Gigabit Network Connection DMI: DMI BIOS Vendor American Megatrends Inc. DMI BIOS Version P11-A0 DMI System Manufacturer Packard Bell DMI System Product imedia S2870 Quote
jensmander Posted July 28, 2019 #9 Posted July 28, 2019 Hm your CPU is a Sandy Bridge model. So the only usable loader for DSM 6.2 is 1.03b (DS3615xs). The NIC should be recognized since it‘s detected with the e1000 driver. Loader 1.04b will not work because you’ll need a newer CPU model (Haswell or later). Try the 1.03b for the 3615. P.S.: if you’re not familiar with live linux systems you can try Aomei‘s free WinPE builder next time so you don’t have to install a complete OS. It has some onboard system information tools 😉 https://www.aomeitech.com/pe-builder.html Quote
adicontakt Posted July 28, 2019 Author #10 Posted July 28, 2019 3 hours ago, jensmander said: Try the 1.03b for the 3615. Ok , I will do Quote
jensmander Posted July 28, 2019 #13 Posted July 28, 2019 The boot screen is pretty normal and shows nothing else once it's started. Sometimes the Synology Assistant doesn't find any NAS even it's online. Check these things: - is your onboard NIC link indicator "blinking" once the loader has started? - do you have a DHCP running in your LAN (needed)? If so check if it has assigned an address to "DiskStation" Quote
adicontakt Posted July 29, 2019 Author #14 Posted July 29, 2019 No, the led is not is blinking Again if I put the loader described in the video i posted everyrhing is ok, the loader start the diskstation is seen in the network Quote
jensmander Posted July 29, 2019 #15 Posted July 29, 2019 That means that the NIC is not recognized by the system. Do you have a separate Intel NIC at hand you could try? Quote
adicontakt Posted July 29, 2019 Author #16 Posted July 29, 2019 Now I am at work, i find an intel network card but is an mini pciex, and i don t know if i have this kind of port on motherboard ( i think it is a regula pcie port) I will keep digging Quote
adicontakt Posted July 29, 2019 Author #17 Posted July 29, 2019 (edited) i put the intel card , now when I search to find the NAS , the green led is blinking but stil doesen"t find the NAS Edited July 29, 2019 by adicontakt Quote
jensmander Posted July 29, 2019 #18 Posted July 29, 2019 Then check your router/dhcp if it has a lease (address) for a device named „DiskStation“. Our you can run the network scanner (it’s part of the xpenology tools for windows) and see if you can find it. Quote
adicontakt Posted July 29, 2019 Author #19 Posted July 29, 2019 (edited) unfortunally ,no in router or in the network scanner , i don:t see DiskStation i only see my devices who are connected: 2 phones , one tv , my pc I even asign an static Ip in dhcp Edited July 29, 2019 by adicontakt Quote
bearcat Posted July 29, 2019 #20 Posted July 29, 2019 (edited) @adicontakt While you had windows running, your NIC was working ok? as stated by @jensmander your 82579V based nic should work with the tested config, but you could try testing with DSM 6.1 / 3615. to see if the NAS gets an IP. I don't know your motherboard, but do your BIOS have an option to boot in legacy mode (as opposed to UEFI/EFI etc.)? With 1.03b and 6.2.x you MUST use legacy. btw: Not sure what you meant by "I even asign an static Ip in dhcp", did you reserve an IP for the mac adress of your NIC? Edited July 29, 2019 by bearcat Quote
adicontakt Posted July 30, 2019 Author #21 Posted July 30, 2019 On windows both NIC work fine. Until now I used uefi And yes, i rezerved an ip for mac I will try with your indication Quote
altas Posted July 30, 2019 #22 Posted July 30, 2019 not sure if could help but they have the same NIC Quote
adicontakt Posted July 30, 2019 Author #23 Posted July 30, 2019 20 hours ago, bearcat said: I don't know your motherboard, but do your BIOS have an option to boot in legacy mode (as opposed to UEFI/EFI etc.)? With 1.03b and 6.2.x you MUST use legacy. In bios on boot menu I have boot: 1:{removable device} 2:{uefi : removable device} 3:dvdrom and so on I booted from both option , is the same situation now I will try testing with DSM 6.1 / 3615. Quote
adicontakt Posted July 30, 2019 Author #24 Posted July 30, 2019 20 hours ago, bearcat said: , but you could try testing with DSM 6.1 / 3615. to see if the NAS gets an IP. with what loader? Quote
adicontakt Posted July 30, 2019 Author #25 Posted July 30, 2019 put DS3615xs 6.1 Jun's Mod V1.02b and DSM_DS3615xs_15284 it works how can update to 6.2? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.