Tarts Posted July 18, 2019 Share #1 Posted July 18, 2019 Hi, Im trying to build a bare metal Xpenology box but am unable to find the Xpenology after booting from USB. My hardware: Asrock Fatal1ty B450 Gaming-ITX/ac Intel i211 Ethernet controller onboard SATA controller (will look up exact model later) AMD Ryzen 2600 16GB RAM Using the bootloader for DS916 I am able to boot from the USB but cannot find the device from any web browser. Synology Assistant only lists my other actual Synology NAS (so it shows that the software itself is working atleast). I have double even triple checked the VID,PID and MAC addresses. The network controller is listed in the extra ram thing... When I boot the computer itself, network port LEDs are blinking but after booting from the USB, leds go dark. I have read somewhere about AMD and disabling C1E but I am unable to find the exact setting for it from the BIOS. I have tried disabling: "AMD CoolNQuiet", "ACPI _CST C1 Declaration" and "Global C-state Control" without luck. These were the closest to this C1E setting I could find from the BIOS. Any other ideas/pointers? Thanks! Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted July 19, 2019 Share #2 Posted July 19, 2019 Hello and welcome to the forum. What exact loader version are you using? and are you sure the loader is booting? Quote Link to comment Share on other sites More sharing options...
luchuma Posted July 19, 2019 Share #3 Posted July 19, 2019 Bad mac/vid/pid?Why 916 loader instead of 918? Wysłane z mojego SM-G970F przy użyciu Tapatalka Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.