Jump to content
XPEnology Community

[ASUSTOR]


iman

Recommended Posts

Hi everyone,

I happy with this project and due to some needs I'm interesting to try asustor ADM from http://www.asustor.com as it looks promising and more feature rich.

 

I know most of you will not like the idea, But I can work on it with some support from from the community and let's see where it will goes.

 

OK here what I did so far,

  1. Visited http://www.asustor.com/service/downloads?product_id=21
  2. Downloaded http://download.asustor.com/download/adm/AS-2XX_2.1.1.R3B2.img
  3. Remove the header (261 bytes) of the file "AS-2XX_2.1.1.R3B2.img"
  4. Extracted the file after removing the header
  5. Booted the resulted file "bzImage" in vmware but stuck in "Switching to clocksource tsc"!

 

Other Ref http://sourceforge.net/projects/asgpl/

 

So either I go to recompile using source from sourceforge or What?

Link to comment
Share on other sites

Hi, I am interested in this, and i have a question:

How do you know to remove the header (261 bytes) of the file "AS-2XX_2.1.1.R3B2.img" ?

 

Here is some debug info:

 

debug info  

 

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.7.9 (root@cross-builder) (gcc version 4.6.3 (x86 64-bit toolchain - ASUSTOR Inc.) ) #1 SMP Tue Mar 11 05:16:51 CST 2014
[    0.000000] Command line: raid=noautodetect root=/dev/sda1 console=ttyS0,115200 BOOT_IMAGE=/zImage 
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fedffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] e820: last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] total RAM covered: 2047M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 2M 	num_reg: 2  	lose cover RAM: 0G
[    0.000000] found SMP MP-table at [mem 0x000f4e20-0x000f4e2f] mapped at [ffff8800000f4e20]
[    0.000000] init_memory_mapping: [mem 0x00000000-0x7fedffff]
[    0.000000] ACPI: RSDP 00000000000f67f0 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 000000007fee3040 0003C (v01 LENOVO TC-5H    42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 000000007fee30c0 00074 (v01 LENOVO GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 000000007fee3180 03957 (v01 LENOVO GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 000000007fee0000 00040
[    0.000000] ACPI: HPET 000000007fee6c40 00038 (v01 LENOVO GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 000000007fee6cc0 0003C (v01 LENOVO GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 000000007fee6b40 00084 (v01 LENOVO GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SLIC 00000000000fdd80 00176 (v01 LENOVO TC-5H    00000126 MSFT 00000097)
[    0.000000] ACPI: SSDT 000000007fee7360 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fedffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7fedffff]
[    0.000000]   NODE_DATA [mem 0x7fedc000-0x7fedffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7fedffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] e820: [mem 0x7ff00000-0xefffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007fc00000 s73856 r8192 d24448 u524288
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515693
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: raid=noautodetect root=/dev/sda1 console=ttyS0,115200 BOOT_IMAGE=/zImage 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Memory: 2049756k/2096000k available (4733k kernel code, 452k absent, 45792k reserved, 6029k data, 536k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2499.965 MHz processor
[    0.002002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.93 BogoMIPS (lpj=2499965)
[    0.004002] pid_max: default: 32768 minimum: 301
[    0.005202] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.007098] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.008597] Mount-cache hash table entries: 256
[    0.009243] Initializing cgroup subsys cpuacct
[    0.010005] Initializing cgroup subsys devices
[    0.011002] Initializing cgroup subsys freezer
[    0.012002] Initializing cgroup subsys blkio
[    0.013003] Initializing cgroup subsys perf_event
[    0.014025] CPU: Physical Processor ID: 0
[    0.015002] CPU: Processor Core ID: 0
[    0.016003] mce: CPU supports 6 MCE banks
[    0.017008] CPU0: Thermal monitoring enabled (TM2)
[    0.018004] process: using mwait in idle threads
[    0.019006] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.019006] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.019006] tlb_flushall_shift: -1
[    0.020096] Freeing SMP alternatives: 16k freed
[    0.021016] ACPI: Core revision 20120913
[    0.025431] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.036012] smpboot: CPU0: Intel Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz (fam: 06, model: 17, stepping: 06)
[    0.042000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.046001] ... version:                2
[    0.047001] ... bit width:              40
[    0.048000] ... generic registers:      2
[    0.049001] ... value mask:             000000ffffffffff
[    0.050001] ... max period:             000000007fffffff
[    0.051000] ... fixed-purpose events:   3
[    0.052000] ... event mask:             0000000700000003
[    0.053212] smpboot: Booting Node   0, Processors  #1
[    0.067021] Brought up 2 CPUs
[    0.068002] smpboot: Total of 2 processors activated (9999.86 BogoMIPS)
[    0.070105] devtmpfs: initialized
[    0.074730] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
[    0.082035] xor: automatically using best checksumming function:
[    0.097683]    generic_sse:  9308.000 MB/sec
[    0.102022] regulator-dummy: no parameters
[    0.106028] RTC time: 14:36:04, date: 05/24/14
[    0.110048] NET: Registered protocol family 16
[    0.115198] ACPI: bus type pci registered
[    0.119044] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.128002] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.137077] PCI: Using configuration type 1 for base access
[    0.144019] bio: create slab  at 0
[    0.165013] raid6: sse2x1    4164 MB/s
[    0.183012] raid6: sse2x2    4269 MB/s
[    0.201003] raid6: sse2x4    7359 MB/s
[    0.202001] raid6: using algorithm sse2x4 (7359 MB/s)
[    0.203001] raid6: using ssse3x2 recovery algorithm
[    0.204023] ACPI: Added _OSI(Module Device)
[    0.205001] ACPI: Added _OSI(Processor Device)
[    0.206001] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.207001] ACPI: Added _OSI(Processor Aggregator Device)
[    0.211225] ACPI: SSDT 000000007fee6d40 002AE (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[    0.214123] ACPI: Dynamic OEM Table Load:
[    0.216189] ACPI: SSDT           (null) 002AE (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[    0.218305] ACPI: SSDT 000000007fee7200 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    0.221044] ACPI: Dynamic OEM Table Load:
[    0.224001] ACPI: SSDT           (null) 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    0.226302] ACPI: Interpreter enabled
[    0.227012] ACPI: (supports S0 S3 S4 S5)
[    0.229847] ACPI: Using IOAPIC for interrupt routing
[    0.234043] ACPI: No dock devices found.
[    0.235004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.236048] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.237101] PCI host bridge to bus 0000:00
[    0.238004] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.239002] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.240002] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.241002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.242002] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.243002] pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff]
[    0.245840] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.246003] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.248453] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.249047] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.250254] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.251009] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.252179] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.253280]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.254002]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.260652] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.264037] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.268607] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.272036] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.276330] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.281036] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.286225] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.291225] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.295898] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.296002] vgaarb: loaded
[    0.297001] vgaarb: bridge control possible 0000:01:00.0
[    0.298077] SCSI subsystem initialized
[    0.299002] ACPI: bus type scsi registered
[    0.300039] ACPI: bus type usb registered
[    0.304020] usbcore: registered new interface driver usbfs
[    0.309012] usbcore: registered new interface driver hub
[    0.314012] usbcore: registered new device driver usb
[    0.316011] pps_core: LinuxPPS API ver. 1 registered
[    0.317001] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.318004] PTP clock support registered
[    0.319026] Advanced Linux Sound Architecture Driver Initialized.
[    0.325001] PCI: Using ACPI for IRQ routing
[    0.330522] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.337003] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.342467] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.350009] Switching to clocksource hpet
[    0.351043] pnp: PnP ACPI init
[    0.354114] ACPI: bus type pnp registered
[    0.358351] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.364267] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.370186] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.376105] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.382025] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.388789] system 00:0a: [io  0x0400-0x04bf] has been reserved
[    0.394900] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.401707] system 00:0c: [mem 0x000cf400-0x000cffff] has been reserved
[    0.408320] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.415279] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.422238] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.429197] system 00:0c: [mem 0x7fee0000-0x7fefffff] could not be reserved
[    0.436156] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.443115] system 00:0c: [mem 0x00100000-0x7fedffff] could not be reserved
[    0.450076] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.457034] system 00:0c: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.463647] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.470260] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.476873] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.483485] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[    0.490097] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[    0.496761] pnp: PnP ACPI: found 14 devices
[    0.500948] ACPI: ACPI bus type pnp unregistered
[    0.512078] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7ff00000-0x800fffff]
[    0.518950] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
[    0.526775] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80300000-0x805fffff pref]
[    0.534082] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80600000-0x806fffff pref]
[    0.541390] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[    0.548606] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.553573] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.559667] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.566452] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.574192] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.579158] pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
[    0.585251] pci 0000:00:1c.0:   bridge window [mem 0x7ff00000-0x800fffff]
[    0.592038] pci 0000:00:1c.0:   bridge window [mem 0x80100000-0x802fffff 64bit pref]
[    0.599779] pci 0000:03:00.0: BAR 6: assigned [mem 0x80300000-0x8031ffff pref]
[    0.606993] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.611961] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
[    0.618055] pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.624839] pci 0000:00:1c.1:   bridge window [mem 0x80300000-0x805fffff pref]
[    0.632063] pci 0000:04:01.0: BAR 6: assigned [mem 0x80600000-0x8061ffff pref]
[    0.639278] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.644244] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.650338] pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.657124] pci 0000:00:1e.0:   bridge window [mem 0x80600000-0x806fffff pref]
[    0.664448] NET: Registered protocol family 2
[    0.669266] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.678803] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.686100] TCP: Hash tables configured (established 262144 bind 65536)
[    0.692777] TCP: reno registered
[    0.696022] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.702046] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.708585] NET: Registered protocol family 1
[    0.713365] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60c
[    0.719278] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
[    0.725253] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[    0.734170] audit: initializing netlink socket (disabled)
[    0.739576] type=2000 audit(1400942163.738:1): initialized
[    0.775838] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.783642] VFS: Disk quotas dquot_6.5.2
[    0.787604] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.794457] fuse init (API version 7.20)
[    0.798467] msgmni has been set to 4003
[    0.802638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.810049] io scheduler noop registered
[    0.813973] io scheduler deadline registered
[    0.818272] io scheduler cfq registered (default)
[    0.823310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.828891] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.835635] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.843978] ACPI: Power Button [PWRB]
[    0.847691] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.855077] ACPI: Power Button [PWRF]
[    0.858837] ACPI: Requesting acpi_cpufreq
[    0.865000] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.891916] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.899935] brd: module loaded
[    0.903635] loop: module loaded
[    0.906956] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    0.914004] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.919763] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
[    0.925588] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[    0.931530] usbcore: registered new interface driver catc
[    0.936963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.943518] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.948774] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.960088] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfa004000
[    0.971017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.976897] hub 1-0:1.0: USB hub found
[    0.980652] hub 1-0:1.0: 8 ports detected
[    0.984794] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.990982] uhci_hcd: USB Universal Host Controller Interface driver
[    0.997348] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.002614] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.010028] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[    1.015886] hub 2-0:1.0: USB hub found
[    1.019644] hub 2-0:1.0: 2 ports detected
[    1.023730] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.028996] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.036416] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[    1.042274] hub 3-0:1.0: USB hub found
[    1.046024] hub 3-0:1.0: 2 ports detected
[    1.050107] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.055363] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.062784] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
[    1.068638] hub 4-0:1.0: USB hub found
[    1.072390] hub 4-0:1.0: 2 ports detected
[    1.076469] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.081729] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.089147] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[    1.094997] hub 5-0:1.0: USB hub found
[    1.098752] hub 5-0:1.0: 2 ports detected
[    1.102855] usbcore: registered new interface driver usblp
[    1.108343] Initializing USB Mass Storage driver...
[    1.113243] usbcore: registered new interface driver usb-storage
[    1.119244] USB Mass Storage support registered.
[    1.123901] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.130684] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.141075] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.146111] mousedev: PS/2 mouse device common for all mice
[    1.151826] rtc_cmos 00:04: RTC can wake from S4
[    1.156559] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.162677] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.169035] i2c /dev entries driver
[    1.172703] md: linear personality registered for level -1
[    1.178197] md: raid0 personality registered for level 0
[    1.183514] md: raid1 personality registered for level 1
[    1.188836] md: raid10 personality registered for level 10
[    1.191230] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.202926] md: raid6 personality registered for level 6
[    1.208235] md: raid5 personality registered for level 5
[    1.213547] md: raid4 personality registered for level 4
[    1.218947] device-mapper: uevent: version 1.0.3
[    1.223633] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[    1.232076] cpuidle: using governor ladder
[    1.236175] cpuidle: using governor menu
[    1.240103] EFI Variables Facility v0.08 2004-May-17
[    1.245382] usbcore: registered new interface driver usbhid
[    1.250952] usbhid: USB HID core driver
[    1.254844] input: Unspecified device as /devices/virtual/input/input3
[    1.261432] Virtual Mouse Driver Initialized.
[    1.283069] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    1.291219] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    1.299797] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    1.308287] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    1.317380] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    1.325019] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[    1.336536] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[    1.347016] TCP: cubic registered
[    1.350451] NET: Registered protocol family 10
[    1.355068] NET: Registered protocol family 17
[    1.359513] 8021q: 802.1Q VLAN Support v1.8
[    1.363705] lib80211: common routines for IEEE802.11 drivers
[    1.369371] Key type dns_resolver registered
[    1.374134]   Magic number: 14:861:637
[    1.377974] console [netcon0] enabled
[    1.381638] netconsole: network logging started
[    1.386190] rtc_cmos 00:04: setting system clock to 2014-05-24 14:36:05 UTC (1400942165)
[    1.395789] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.401808] EDD information not available.
[    1.405953] ALSA device list:
[    1.408919]   #0: HDA Intel at 0xfa000000 irq 43
[    1.413538]   #1: HDA ATI HDMI at 0xf5010000 irq 44
[    1.418553] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[    1.426277] VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6
[    1.433577] Please append a correct "root=" boot option; here are the available partitions:
[    1.441938] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    1.442921] Pid: 1, comm: swapper/0 Not tainted 3.7.9 #1
[    1.442921] Call Trace:
[    1.442921]  [] panic+0xb9/0x1b6
[    1.442921]  [] mount_block_root+0x26b/0x282
[    1.442921]  [] mount_root+0x53/0x57
[    1.442921]  [] prepare_namespace+0x16d/0x1a6
[    1.442921]  [] ? release_tgcred.isra.17+0x26/0x26
[    1.442921]  [] kernel_init_freeable+0x1b3/0x1be
[    1.442921]  [] ? do_early_param+0x86/0x86
[    1.442921]  [] ? rest_init+0x6f/0x6f
[    1.442921]  [] kernel_init+0x9/0xea
[    1.442921]  [] ret_from_fork+0x7c/0xb0
[    1.442921]  [] ? rest_init+0x6f/0x6f
[    1.518742] ------------[ cut here ]------------
[    1.519741] WARNING: at /asustor/cross/as-6xx/branches/B_2_1_0_20131031/source/linux-3.7.9/arch/x86/kernel/smp.c:123 native_smp_send_reschedule+0x25/0x58()
[    1.519741] Hardware name: P31-S3G
[    1.519741] Modules linked in:
[    1.519741] Pid: 1, comm: swapper/0 Not tainted 3.7.9 #1
[    1.519741] Call Trace:
[    1.519741]    [] warn_slowpath_common+0x7e/0x96
[    1.519741]  [] warn_slowpath_null+0x15/0x17
[    1.519741]  [] native_smp_send_reschedule+0x25/0x58
[    1.519741]  [] trigger_load_balance+0x1b4/0x1e0
[    1.519741]  [] scheduler_tick+0xda/0xe3
[    1.519741]  [] update_process_times+0x60/0x71
[    1.519741]  [] tick_nohz_handler+0x8a/0xd3
[    1.519741]  [] smp_apic_timer_interrupt+0x72/0x85
[    1.519741]  [] apic_timer_interrupt+0x6a/0x70
[    1.519741]    [] ? console_unlock+0x2d2/0x2fd
[    1.519741]  [] ? panic+0x17e/0x1b6
[    1.519741]  [] ? panic+0xe7/0x1b6
[    1.519741]  [] mount_block_root+0x26b/0x282
[    1.519741]  [] mount_root+0x53/0x57
[    1.519741]  [] prepare_namespace+0x16d/0x1a6
[    1.519741]  [] ? release_tgcred.isra.17+0x26/0x26
[    1.519741]  [] kernel_init_freeable+0x1b3/0x1be
[    1.519741]  [] ? do_early_param+0x86/0x86
[    1.519741]  [] ? rest_init+0x6f/0x6f
[    1.519741]  [] kernel_init+0x9/0xea
[    1.519741]  [] ret_from_fork+0x7c/0xb0
[    1.519741]  [] ? rest_init+0x6f/0x6f
[    1.519741] ---[ end trace c22e345a6e308f9a ]---

 

Hide  
 
Link to comment
Share on other sites

>>How do you know to remove the header (261 bytes) of the file "AS-2XX_2.1.1.R3B2.img" ?

Just quick look at the file in HEX mode showed that.

 

thanks for debug info (more information about environment please). So I can translate it to that We shall start debugging the kernel (Task 1).

Task 2 - We need to decide should we patch the original file or shall We compile from source ?

Task 3 - We need to decide should We keep it here or move it to anther website something XPSTOR :smile: ?

Link to comment
Share on other sites

We need to get initramfs first, only the kernel is not enough, look this:

[ 1.433577] Please append a correct "root=" boot option; here are the available partitions:

 

I boot the kernel on a physical machine, not virtualized environment.

Link to comment
Share on other sites

Hi all,

Ok, Successfully extracted from "AS-2XX_2.1.1.R3B2.img" following files :

bzImage
bzImage.cksum
bzImage.md5sum
initramfs
initramfs.cksum
initramfs.md5sum
builtin.tgz
builtin.tgz.cksum
builtin.tgz.md5sum

 

by splitting the file "AS-2XX_2.1.1.R3B2.img" if 4 parts using following information :

Title              Offset(HEX)         Offset(DEC)         Size (DEC)
---------------    ----------------    ----------------    ----------------
header             00000000            0                   261
bzImage            00000105            261                 2324481
initramfs          00237906            2324742             10045441
builtin.tgz        00BCC107            12370183            to EOF

 

Then untar each split.

Hope this help.

Next I will try to boot again.

Link to comment
Share on other sites

booted up with qemu successfully. here is the boot log:

 

don't know how to use builtin.tgz now, it seems we should extract builtin.tgz to the root partition?

 

boot log  

 

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.39 (root@cross-builder) (gcc version 4.6.3 (x86 32-bit toolchain - ASUSTOR Inc.) ) #1 SMP PREEMPT Tue Mar 11 00:55:36 CST 2014
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fffe000 (usable)
[    0.000000]  BIOS-e820: 000000003fffe000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x3fffe max_arch_pfn = 0x1000000
[    0.000000] found SMP MP-table at [c00f1800] f1800
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000] RAMDISK: 3f65e000 - 3fff0000
[    0.000000] Allocated new RAMDISK: 3726c000 - 37bfdaa4
[    0.000000] Move RAMDISK from 000000003f65e000 - 000000003ffefaa3 to 3726c000 - 37bfdaa3
[    0.000000] ACPI: RSDP 000f16a0 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 3fffe450 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 3fffff80 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 3fffe490 01137 (v01   BXPC   BXDSDT 00000001 INTL 20140114)
[    0.000000] ACPI: FACS 3fffff40 00040
[    0.000000] ACPI: SSDT 3ffff700 00838 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 3ffff610 00078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 3ffff5d0 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] 132MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x0003fffe
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fffe
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:beffc000)
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 11 pages/cpu @f6800000 s24384 r0 d20672 u2097152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259996
[    0.000000] Kernel command line: console=tty0 console=ttyS0
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4194256 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003fffe)
[    0.000000] Memory: 1019184k/1048568k available (3457k kernel code, 28992k reserved, 1556k data, 368k init, 135168k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff18000 - 0xfffff000   ( 924 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc14e6000 - 0xc1542000   ( 368 kB)
[    0.000000]       .data : 0xc13604f6 - 0xc14e5740   (1556 kB)
[    0.000000]       .text : 0xc1000000 - 0xc13604f6   (3457 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:512
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: PIT calibration matches HPET. 2 loops
[    0.000000] Detected 2255.487 MHz processor.
[    0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4510.97 BogoMIPS (lpj=9021948)
[    0.024007] pid_max: default: 32768 minimum: 301
[    0.026189] Mount-cache hash table entries: 512
[    0.030173] Initializing cgroup subsys ns
[    0.032015] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.036009] Initializing cgroup subsys cpuacct
[    0.038132] Initializing cgroup subsys memory
[    0.040044] Initializing cgroup subsys devices
[    0.042035] Initializing cgroup subsys freezer
[    0.044008] Initializing cgroup subsys blkio
[    0.045895] Initializing cgroup subsys perf_event
[    0.048122] mce: CPU supports 10 MCE banks
[    0.054095] SMP alternatives: switching to UP code
[    0.161324] Freeing SMP alternatives: 20k freed
[    0.163432] ACPI: Core revision 20110316
[    0.165107] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.172276] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.211440] CPU0: Intel QEMU Virtual CPU version 1.6.2 stepping 03
[    0.216012] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
[    0.228023] Brought up 1 CPUs
[    0.230163] Total of 1 processors activated (4510.97 BogoMIPS).
[    0.232772] devtmpfs: initialized
[    0.236065] xor: automatically using best checksumming function: pIII_sse
[    0.256029]    pIII_sse  :  7013.000 MB/sec
[    0.257952] xor: using function: pIII_sse (7013.000 MB/sec)
[    0.260112] NET: Registered protocol family 16
[    0.262544] ACPI: bus type pci registered
[    0.264059] PCI: Using configuration type 1 for base access
[    0.266403] pcimode=0x0
[    0.273099] bio: create slab  at 0
[    0.340098] raid6: int32x1    785 MB/s
[    0.408055] raid6: int32x2    661 MB/s
[    0.476109] raid6: int32x4    670 MB/s
[    0.544117] raid6: int32x8    626 MB/s
[    0.612057] raid6: mmxx1     2865 MB/s
[    0.680049] raid6: mmxx2     3258 MB/s
[    0.748074] raid6: sse1x1    1907 MB/s
[    0.816062] raid6: sse1x2    2530 MB/s
[    0.884061] raid6: sse2x1    3383 MB/s
[    0.952075] raid6: sse2x2    4166 MB/s
[    0.953977] raid6: using algorithm sse2x2 (4166 MB/s)
[    0.958745] ACPI: Interpreter enabled
[    0.960077] ACPI: (supports S0 S3 S5)
[    0.962483] ACPI: Using IOAPIC for interrupt routing
[    0.969651] ACPI: No dock devices found.
[    0.971528] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.972276] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.980159] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.984092] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.994366] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.997790] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.001996] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.005808] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.009047] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.012291] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.015888] vgaarb: loaded
[    1.016318] SCSI subsystem initialized
[    1.020387] usbcore: registered new interface driver usbfs
[    1.022762] usbcore: registered new interface driver hub
[    1.024112] usbcore: registered new interface driver ethub
[    1.028145] usbcore: registered new device driver usb
[    1.032335] PCI: Using ACPI for IRQ routing
[    1.034931] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.044086] Switching to clocksource hpet
[    1.046064] pnp: PnP ACPI init
[    1.047742] ACPI: bus type pnp registered
[    1.049081] pnp: PnP ACPI: found 9 devices
[    1.051040] ACPI: ACPI bus type pnp unregistered
[    1.097806] NET: Registered protocol family 2
[    1.101378] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.104425] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.108451] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.111344] TCP: Hash tables configured (established 131072 bind 65536)
[    1.113961] TCP reno registered
[    1.115529] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.119717] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.122554] NET: Registered protocol family 1
[    1.124582] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.127792] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.130622] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.133604] Trying to unpack rootfs image as initramfs...
[    2.780643] Freeing initrd memory: 9800k freed
[    2.787418] microcode: CPU0 sig=0x623, pf=0x0, revision=0x1
[    2.789897] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[    2.809561] highmem bounce pool size: 64 pages
[    2.811723] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.818479] VFS: Disk quotas dquot_6.5.2
[    2.820366] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.824347] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    2.830674] fuse init (API version 7.16)
[    2.835413] msgmni has been set to 1745
[    2.839671] alg: No test for stdrng (krng)
[    2.842130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.845551] io scheduler noop registered
[    2.847378] io scheduler deadline registered
[    2.849261] io scheduler cfq registered (default)
[    2.851704] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.883586] serial8250: ttyS0 at I/O 0x3f8 (irq = 38) is a 16550A
[    2.979780] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.016709] brd: module loaded
[    3.019524] loop: module loaded
[    3.021902] physmap platform flash device: 08000000 at c0000000
[    3.031517] vmap allocation for size 134221824 failed: use vmalloc= to increase size.
[    3.035084] physmap-flash physmap-flash.0: Failed to ioremap flash region
[    3.037773] physmap-flash: probe of physmap-flash.0 failed with error -5
[    3.043518] Intel(R) SPI FLASH CONTROLLER Driver built on Mar 11 2014 @ 00:50:05
[    3.047562] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    3.050495] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    3.053036] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    3.055535] e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[    3.059934] GBE working in Real Phy Mode
[    3.849528] Refined TSC clocksource calibration: 2255.382 MHz.
[    3.852010] Switching to clocksource tsc
[    3.939919] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    3.943507] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
[    3.946411] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[    3.948852] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    3.951379] 	   UDMA -  Intel (R) UDMA Driver - 1.0.0
[    3.951381] 
[    3.954570] 	   UDMA -  Copyright (c) 2012 Intel Corperation. 
[    3.954572] 
[    3.958142] eth_udma0: Features changed: 0x00004800 -> 0x00004000
[    3.960778] eth_udma1: Features changed: 0x00004800 -> 0x00004000
[    3.963292] UDMA Network Device Driver init 
[    3.965324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.968028] Initializing USB Mass Storage driver...
[    3.970158] usbcore: registered new interface driver usb-storage
[    3.976268] USB Mass Storage support registered.
[    3.979535] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    3.985265] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.988736] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.991099] mousedev: PS/2 mouse device common for all mice
[    3.993856] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.001490] i2c /dev entries driver
[    4.009952] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[    4.014048] md: linear personality registered for level -1
[    4.016505] md: raid0 personality registered for level 0
[    4.019175] md: raid1 personality registered for level 1
[    4.021575] md: raid10 personality registered for level 10
[    4.023987] md: raid6 personality registered for level 6
[    4.026307] md: raid5 personality registered for level 5
[    4.028494] md: raid4 personality registered for level 4
[    4.030826] device-mapper: uevent: version 1.0.3
[    4.032938] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    4.041272] cpuidle: using governor ladder
[    4.047279] usbcore: registered new interface driver usbhid
[    4.050974] usbhid: USB HID core driver
[    4.052688] input: Unspecified device as /devices/virtual/input/input2
[    4.055900] Virtual Mouse Driver Initialized.
[    4.057948] oprofile: using NMI interrupt.
[    4.059920] TCP cubic registered
[    4.061572] Initializing XFRM netlink socket
[    4.066743] NET: Registered protocol family 10
[    4.071046] NET: Registered protocol family 17
[    4.074077] NET: Registered protocol family 15
[    4.077009] 802.1Q VLAN Support v1.8 Ben Greear 
[    4.081511] All bugs added by David S. Miller 
[    4.083967] Registering the dns_resolver key type
[    4.086185] Using IPI No-Shortcut mode
[    4.088356] /asustor/cross/as-3xx/branches/B_2_1_0_20131031/source/linux-2.6.39/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    4.096362] Freeing unused kernel memory: 368k freed
[    4.102990] Write protecting the kernel text: 3460k
[    4.105783] Write protecting the kernel read-only data: 1252k
[    4.108586] NX-protecting the kernel data: 2684k
net.ipv4.neigh.default.gc_thresh1 = 512
net.ipv4.neigh.default.gc_thresh2 = 2048
net.ipv4.neigh.default.gc_thresh3 = 4096
Loading Platform driver...
[    4.991692] PAL driver init...
[    4.996615] Unable to access PCI bus 0 device 31 function 0.
[    5.004256] Device: Unknown Device ID:Vendor ID   0x12378086
[    5.006902]                   Revision ID 2
[    5.008740] Unable to determine deivce ID Call to pal_get_soc_info failed.
Loading Etron USB driver...
Starting nasmand...
No SPI NOR flash MTD device node found in "/sys/class/mtd" 
Error opening device SPI FLASH
Please ensure that:
- The flash device is not opened twice at same time
- flash driver is properly loaded
- Device node  is created
oflash_open() failed
No SPI NOR flash MTD device node found in "/sys/class/mtd" 
Error opening device SPI FLASH
Please ensure that:
- The flash device is not opened twice at same time
- flash driver is properly loaded
- Device node  is created
oflash_open() failed
nasmand: Can't add [/usr/builtin/etc/resource.conf] into inotify watch list! (-2)
nasmand: Can't add [/usr/builtin/etc/rsyslog.d/asustor.conf] into inotify watch list! (-2)
Starting netmand...
[    5.726370] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[    5.809384] e1000: eth0 enable PHY SSC function
[    6.268727] 8021q: adding VLAN 0 to HW filter on device eth0
netmand: Settle network: 0
Initializing random number generator... done.
Starting stormand...
Asustor Storage Management Daemon Ver. 1.1.2
stormand: The system is booting from [] with filesystem type [ext2]... (0)
No SPI NOR flash MTD device node found in "/sys/class/mtd" 
Error opening device SPI FLASH
Please ensure that:
- The flash device is not opened twice at same time
- flash driver is properly loaded
- Device node  is created
oflash_open() failed
No SPI NOR flash MTD device node found in "/sys/class/mtd" 
Error opening device SPI FLASH
Please ensure that:
- The flash device is not opened twice at same time
- flash driver is properly loaded
- Device node  is created
oflash_open() failed
stormand: Reactivate Nas storage system: -335
Starting crond...
crond[1916]: crond: crond (busybox 1.19.3) started, log level 8
Starting lighttpd...
Starting ssh...
Starting hostmand...
Host Management Daemon. Ver. 0.8.0
Starting httpredir...
Starting ecmand...
[   16.749327] asleddrv: module license 'ASUSTOR' taints kernel.
[   16.759519] Disabling lock debugging due to kernel taint
EC Management Daemon. Ver. 1.0.0
Starting watchmand...
Send system log error! (-111)
Asustor Storage Management Daemon Ver. 1.1.2

Please press Enter to activate this console. 
/bin/sh: can't access tty; job control turned off
/ # ls /
bin      home     lib64    opt      run      sys      var
dev      init     linuxrc  proc     sbin     tmp      volume0
etc      lib      mnt      root     share    usr
/ # 

 

Hide  

 

 
Link to comment
Share on other sites

How about AS-6XX_2.1.1.R3B2.img with kernel 3.7.9 ? i can't split it, it is different.

 

Hi sancome,

 

The file structure is same, but the use bzip2 compressed the tar archive. Just use the following command to extract those files:

 

bzImage:
tail -c +262 AS-6XX_2.1.1.R3B2.img | bunzip2 | tar xf -

initramfs:
tail -c +3109163 AS-6XX_2.1.1.R3B2.img | bunzip2 | tar xf -

builtin.tgz:
tail -c +13189717 AS-6XX_2.1.1.R3B2.img | bunzip2 | tar xf -

 

Good luck!

Link to comment
Share on other sites

Hi everyone,

 

I'm interrested by your project, cause i'm looking for a project like xpenology with xbmc player integrated in.

That's what does asustor's adm.

I'm a very beginner on linux.

Is there is a web site about your project that can help me to build a home made nas?

 

Thanks and excuse me for my poor English

 

Loeufdur

Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...
Hi all,

 

 

by splitting the file "AS-2XX_2.1.1.R3B2.img" if 4 parts using following information :

Title              Offset(HEX)         Offset(DEC)         Size (DEC)
---------------    ----------------    ----------------    ----------------
header             00000000            0                   261
bzImage            00000105            261                 2324481
initramfs          00237906            2324742             10045441
builtin.tgz        00BCC107            12370183            to EOF

 

Then untar each split.

Hope this help.

Next I will try to boot again.

 

hi,

sizes, in your tables, in the right hand column take account of 0 ( offset ) ? therefore the ranks must be removed one at every time, right?

0 - 260

261 - 2324480

2324742 - 10045440

12370183 - EOF ?

Link to comment
Share on other sites

ah! but I have version 2.2, this may not be the same values?!

 

because in the header i'have :

 

#!/bin/sh

model=AS-6XX
version=2.2.0.B5F3
kernel_skip=17
initramfs_size=10929240
initramfs_skip=12070   
builtinfs_size=84739413
builtinfs_skip=54242   
script_line=384105   
md5sum=01e80d49eb0bf6a06b4ed49c1f7f7a67

echo ""
echo "$0 [options]"
echo ""
exit 0;

 

if I take the same values ​​as you, counting the offset in my range, I can open the archive bzImage but not extract it.

Nothing in builtin.tgz, which nevertheless 86Mo.

impossible to mount initramfs with sudo mount -o loop /initramfs /media/prout

Link to comment
Share on other sites

untar work for bzImage

 

 

tail -c +3109163 AS-6XX_2.2.0.B5F3.img | bunzip2 | tar xf -
bunzip2: (stdin) is not a bzip2 file.
tar: Ceci ne ressemble pas à une archive de type « tar »
tar: Arrêt avec code d'échec à cause des erreurs précédentes

 

tail -c +13189717 AS-6XX_2.2.0.B5F3.img | bunzip2 | tar xf -
bunzip2: (stdin) is not a bzip2 file.
tar: Ceci ne ressemble pas à une archive de type « tar »
tar: Arrêt avec code d'échec à cause des erreurs précédentes

Edited by Guest
Link to comment
Share on other sites

I tried to take the original file, version 2.1.1 for 2xx, all files unpacks properly with the control files, except for the initramfs. I can mount the archive but not extract it. I have a message that the archive is truncated. Yet I have taken the same values ​​as the table. And in the archive, I do not have control files that appear.

 

edit : problem resolved, i have 9 files, but i dont know boot the bzImage file ...

Edited by Guest
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...