momoegg Posted June 29, 2014 Share #426 Posted June 29, 2014 Have a question, It is possible to use USB TV stick on DSM that host on ESXi? Since I am still thinking to build a XPEnology physically or virtually. If answer is yes, I will definitely go to VM!!! Quote Link to comment Share on other sites More sharing options...
thieson Posted June 29, 2014 Share #427 Posted June 29, 2014 Hi, Hello Is there a way to make with nanoboot a synology 1813 instead of the 3614 ? Thanks You would need to recompile nanoboot and figure out yourself as there is no support.. http://nanoboot.tk/source Hey guys, i just upgrade from Trantor his DSM 5.0 beta to Nano-boot 5.0.3.1/ 4493 update 2 without major issues. Only one bugging point and that is that my Gigabit Network Realtek 8111f is only seen als 100 Mpbs instead of 1000 Mbps. Anyone having this same issue and found a solution for this issue ? Greetz. have you checked if the right kernelmodule is loaded? You can ssh your box and check it with lspci -v the loaded module should be r8168 i think.. Have a question, It is possible to use USB TV stick on DSM that host on ESXi? Since I am still thinking to build a XPEnology physically or virtually. If answer is yes, I will definitely go to VM!!! This should answer your question. http://pubs.vmware.com/vsphere-50/topic ... E800D.html the only question is if nanoboot supports your stick. Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
PeterGron Posted June 29, 2014 Share #428 Posted June 29, 2014 Hi Thieson, kernel driver R8169 is loaded. See include print screen Quote Link to comment Share on other sites More sharing options...
thieson Posted June 29, 2014 Share #429 Posted June 29, 2014 Hi Thieson, kernel driver R8169 is loaded. See include print screen Can you try to add the following line to the boot option of your nanoboot sysconfig.cfg and report? rmmod=r8169,r8169_new insmod=r8168 I think it could work as the r8169 module is for the 8169 and 8110.. Gesendet von iPad mit Tapatalk Quote Link to comment Share on other sites More sharing options...
PeterGron Posted June 29, 2014 Share #430 Posted June 29, 2014 Hey Thieson i have added rmmod=r8169,r8169_new insmod=r8168 to the \boot\grub\menu_nano.lst although the dmesg output shows a gigabyte driver the synology network settings remain unchanged still showing 100 Mbps Quote Link to comment Share on other sites More sharing options...
LayS Posted June 30, 2014 Share #431 Posted June 30, 2014 Update DSM 5.0-4493 Update2 = OK thx nanoboot. Quote Link to comment Share on other sites More sharing options...
libra1999 Posted July 1, 2014 Share #432 Posted July 1, 2014 Update2 works well in DSM without "sed" thanks Nanoboot! Quote Link to comment Share on other sites More sharing options...
libra1999 Posted July 1, 2014 Share #433 Posted July 1, 2014 Hibernation does work with my system, any thought? Quote Link to comment Share on other sites More sharing options...
mheloy Posted July 1, 2014 Share #434 Posted July 1, 2014 Hi, Would like to thank nanoboot for this fantastic project and all his effort into this. Thanks Just like to ask if the LSI 9211-8i will have problems with this version of Nanoboot (4493) - 5.0.3.1? Quote Link to comment Share on other sites More sharing options...
ryman Posted July 1, 2014 Share #435 Posted July 1, 2014 Hey, i got this error updating to update 2. I'm on Nanboot 5.0.3.1 x64 and DSM5 4482. Quote Link to comment Share on other sites More sharing options...
mervincm Posted July 1, 2014 Share #436 Posted July 1, 2014 I had no issue applying update 1 and update 2 after upgradeing DSM to 4493. I used only the DSM GUI in both cases. Quote Link to comment Share on other sites More sharing options...
witek Posted July 2, 2014 Share #437 Posted July 2, 2014 Hi, please add driver for HP NC373i Integrated Multifunction Gigabit Server Adapter to the next release of nanoboot. http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=en〈=en&sp4ts.oid=3660137&ac.admitted=1404281097847.876444892.492883150 Quote Link to comment Share on other sites More sharing options...
mdurkin Posted July 3, 2014 Share #438 Posted July 3, 2014 Hi All, I finally managed to boot using xen, was quite straightforward in the end. Now I'm having trouble passing through more than 3 storage devices. using the hdx passthrough xen only supports 4 devices, but using the xvdx devices I should be able to use more - certainly the machine boots (it doesn't if I try going up to hde), but in DSM I only see 4 devices. xen config : bootloader='pygrub' builder = 'hvm' vcpus = '2' memory = '1024' disk = [ 'file:/media/isos/NanoBoot-5.0.3.1-fat.img,xvda,r' , 'phy:/dev/xenserver-vg/nas-lv,xvdb,w' , 'phy:/dev/sda,xvdc,w' , 'phy:/dev/sdb,xvdd,w' , 'phy:/dev/sdc,xvde,w' ] name = 'vnas' vif = [ 'mac=00:16:3E:51:20:4D,bridge=xenbr0,model=e1000' ] #on_poweroff = 'shutdown' #on_reboot = 'shutdown' #on_crash = 'restart' #on_xend_start = 'start' #on_xend_stop = 'shutdown' boot = 'dc' acpi = '1' acpi = '1' apic = '1' viridian = '1' xen_platform_pci='1' sdl = '0' vnc = '1' vnclisten = '0.0.0.0' vncdisplay='1' stdvga = '0' usb = '0' usbdevice = ['tablet' ] device_model_version="qemu-xen-traditional" gfx_passthru=0 I wonder if anyone has any experience of this? Is there anything in nanoboot that limits the number of devices? Thanks, Matt Quote Link to comment Share on other sites More sharing options...
mdurkin Posted July 4, 2014 Share #439 Posted July 4, 2014 xen is turning out to be a bit of a problem. Looks like hvm emulation only supports IDE emulation, and it seems that limits things to 4 devices. Not good. nanoboot knocks one off, I have an install logical volume carved off an ssd for DSM (and DSM apps etc), and then 2 out of the 3 disks. Starting to become a bit disappointed. I could use lvm or md to pool the drives and pass as one hdx ide drive, but that's rather defeating the point of using DSM to manage that. Does anyone have any ideas? Quote Link to comment Share on other sites More sharing options...
Werter Posted July 5, 2014 Share #440 Posted July 5, 2014 running Nanoboot (4493) - 5.0.3.1 and have problem expanding existing volume1. had five 4tb disks and putt the 5th disk in and it checked it butt did not expand the volume. now it says that I can expand the volume from 10,73gb to 14886gb but when I push the button it stops jus after a few seconds and it goes back to saying I can expand the volume again . have tried an test build with 2 disks and expanded it one disk at a time upp to 6 disks and it worked. it was just a bunch off small disks. butt now when I tried to bulild one with 4tb disks in the order off putting 2x4tb to start with and then expanding one disk at a time. worked great until then 5th disk. I have media on the disks and don't know what to do. have tried some off the instruktions like umounting the volume and resize it and stuff like that butt still says the same. my rigg is i7 960 GIGABYTE GA-X58A-UD3R V2.0 Motherboard Intel X58 Express LGA 1366 DDR3 5x4 tb segate nas hd 6gig corsair mem 650 corsair power I get this when I type the command vgdisplay -v. is there something wrong? TVIX> vgdisplay -v Finding all volume groups Finding volume group "vg1000" --- Volume group --- VG Name vg1000 System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 9 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 14.54 TB PE Size 4.00 MB Total PE 3810823 Alloc PE / Size 3810823 / 14.54 TB Free PE / Size 0 / 0 VG UUID Md51rm-ke80-E104-cN2s-fuJT-Dbqo-WiOIN3 --- Logical volume --- LV Name /dev/vg1000/lv VG Name vg1000 LV UUID YiBJnA-k8yD-F2rq-Aj5t-rgwL-rkmz-UQG2SW LV Write Access read/write LV Status available # open 1 LV Size 14.54 TB Current LE 3810823 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 4096 Block device 253:0 --- Physical volumes --- PV Name /dev/md2 PV UUID H5YF1N-iNUc-CmJM-fjbZ-yKyp-Srz8-QdcwQJ PV Status allocatable Total PE / Free PE 3810823 / 0 Quote Link to comment Share on other sites More sharing options...
sinnuendo Posted July 6, 2014 Share #441 Posted July 6, 2014 Hi Werter, Try doing a scrub of your volume, this will do a consistency check of your disks. In DSM - Storage Manager Volume Manage This could take about a 24 hours or more Once that is complete try expanding again Cheers Sinnuendo Quote Link to comment Share on other sites More sharing options...
Werter Posted July 6, 2014 Share #442 Posted July 6, 2014 Hi Werter,Try doing a scrub of your volume, this will do a consistency check of your disks. In DSM - Storage Manager Volume Manage This could take about a 24 hours or more Once that is complete try expanding again Cheers Sinnuendo I will try that and report back when it is done and I tried to expand. Quote Link to comment Share on other sites More sharing options...
Werter Posted July 6, 2014 Share #443 Posted July 6, 2014 did an scrub of my volume. and tried to expand again butt did not work it says faild to expand unmounted the volume and did an fsck.ext4 /dev/md2 butt got the following message: TVIX> fsck.ext4 /dev/md2 e2fsck 1.42.6 (21-Sep-2012) fsck.ext4: Invalid argument while trying to open /dev/md2 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 tried e2fsck -p /dev/vg1000/lv and it started and finished and then I rebooted and tried to expand but did not work tried another command to se if the system hass issues TVIX> tail -f /var/log/messages Jul 7 18:27:04 TVIX synocheckhotspare: synocheckhotspare.c:138 [iNFO] No hotspare config , skip hotspare config check. [0x2000 virtual_space_layer_get.c:98] Jul 7 18:30:06 TVIX S99zbootok.sh: Error! synoservices start failed! (service [ssh-shell ] is not ready, please wait...) Jul 7 18:30:09 TVIX ntpdate: Sync with time server 193.228.143.12 offset -0.001938 sec. Jul 7 18:32:55 TVIX entry.cgi_SYNO.Core.Upgrade.Server[1].check[22835]: smallupdate.cpp: 413 small fix can't downgrade, org_version[2], new_version[2] Jul 7 18:33:05 TVIX volumehandler.cgi: space_expand_unallocated.c:82 [info] Success Dump map file Jul 7 18:33:10 TVIX kernel: [ 392.350262] EXT4-fs warning (device dm-0): ext4_resize_fs :1996: No reserved GDT blocks, can't resize Jul 7 18:33:10 TVIX volumehandler.cgi: (fs_vol_expand.c)ExtFSExpand(88):Failed to '/sbin /resize2fs -fpF /dev/vg1000/lv > /dev/null 2>&1', WEXITSTATUS® = 1 Jul 7 18:33:10 TVIX volumehandler.cgi: volume_manage_with_temp_dev.c:279 Failed to expan d file system on /dev/vg1000/lv Jul 7 18:33:10 TVIX volumehandler.cgi: volume_lib.cpp:952 Failed to expand file system o n /dev/vg1000/lv Jul 7 18:33:10 TVIX volumehandler.cgi: volumehandler.cpp:1444 failed to expand unallocat ed file system: /volume1 file system on /dev/vg1000/lv what dose it mean? can I exchange the usb with another usb with a fresh 5,0,3,1 and try ? or can I install a fresh install of the 5.0.3.1 and a fresh install of pat file? Quote Link to comment Share on other sites More sharing options...
amextrem Posted July 7, 2014 Share #444 Posted July 7, 2014 Does nanoboot have drivers for the following ethernet drivers? Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe My Tadpole Pulsar Thin client is working without problems with gnoboot but no luck with nanoboot. Thanks all for this amazing project Quote Link to comment Share on other sites More sharing options...
ElGato Posted July 7, 2014 Share #445 Posted July 7, 2014 can I exchange the usb with another usb with a fresh 5,0,3,1 and try ?or can I install a fresh install of the 5.0.3.1 and a fresh install of pat file? I've done a few re-installs of the VM as using ESXi and not lost any data yet, appears to recognise the fact that the volumes are already synology disks, but YMMV. Quote Link to comment Share on other sites More sharing options...
Werter Posted July 8, 2014 Share #446 Posted July 8, 2014 (edited) can I exchange the usb with another usb with a fresh 5,0,3,1 and try ?or can I install a fresh install of the 5.0.3.1 and a fresh install of pat file? I've done a few re-installs of the VM as using ESXi and not lost any data yet, appears to recognise the fact that the volumes are already synology disks, but YMMV. did an fresh install and the files were still there but still cant expand the volume with the last disk but it is initialized I am going crazy. and I have no where to backup my data and start over with 5 drives in a new volume please help found this guide but I don't want to lose the data. and Linux is not my strong suit. butt do you think it will work? link below of the guide http://blog.azib.net/2013/12/how-i-upgr ... as-to.html Edited July 8, 2014 by Guest Quote Link to comment Share on other sites More sharing options...
FrankGNL Posted July 8, 2014 Share #447 Posted July 8, 2014 DSM 5 is fully working now, but i would like to hide the USB boot drive, i already used the search function, but couldn't find anything helpful. So my question is it possible to hide the USB boot drive and how can i do this? Thanks Quote Link to comment Share on other sites More sharing options...
ketty_yijun Posted July 8, 2014 Share #448 Posted July 8, 2014 My hp microserver comes with atheros ar8132m NIC onboard. But nanoboot 5.0.x.x loads a Broadcom driver tg3. Can I unload tg3 then insmod ar8132m? What is ar8132m driver name? Quote Link to comment Share on other sites More sharing options...
SilverGhost Posted July 8, 2014 Share #449 Posted July 8, 2014 DSM 5 is fully working now, but i would like to hide the USB boot drive, i already used the search function, but couldn't find anything helpful.So my question is it possible to hide the USB boot drive and how can i do this? Thanks Yes, you can hide the boot drive: edit syslinux.cfg so your drive's vid and pid should be there LABEL Synology DSM 5.0 MENU LABEL Synology DSM 5.0 kernel /zImage ihd_num=0 netif_num=4 syno_hw_version=DS3612xs mac1=00113208D63C mac2=00113208D63D sn=B3J4N01003 vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 Quote Link to comment Share on other sites More sharing options...
gokou88 Posted July 8, 2014 Share #450 Posted July 8, 2014 Can someone point me to instructions on how to upgrade Gnoboot with 4458U2 to Nanoboot 4493U2 without losing data on my array? I tried searching the forum threads but did not find anything. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.