Jump to content
XPEnology Community

Trial of Nanoboot (4493) - 5.0.3.1


Recommended Posts

A few things I noticed since changing from GnoBoot to NanoBoot.

If anyone has some fixes I am willing to test.

 

1. Synology Assistant - Reporting : Status as not configured. <--- anyone know how to fix this its annoying the system is working 100% except that message :?:

2. System will not reboot. :twisted:

3. Home/s folder is inaccessible since migration. :?:

4. System performance seems a bit on the slow side, but maybe its just me. NOTE: startup is fast the webui is slow. :evil:

5. On NanoBoot startup there is a message : not a synology partition or something like that will confirm. :shock:

6. System Randomly Crashes / Becomes inaccessible. Forced reboot required. :evil:

 

Apparently we share the same issues.

What hardware do you have?

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

A few things I noticed since changing from GnoBoot to NanoBoot.

If anyone has some fixes I am willing to test.

 

1. Synology Assistant - Reporting : Status as not configured. <--- anyone know how to fix this its annoying the system is working 100% except that message :?:

2. System will not reboot. :twisted:

3. Home/s folder is inaccessible since migration. :?:

4. System performance seems a bit on the slow side, but maybe its just me. NOTE: startup is fast the webui is slow. :evil:

5. On NanoBoot startup there is a message : not a synology partition or something like that will confirm. :shock:

6. System Randomly Crashes / Becomes inaccessible. Forced reboot required. :evil:

 

Apparently we share the same issues.

What hardware do you have?

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Hi, as I see many of You has a problem with shared folders when switching from gnoboot to nanoboot. There was the same problem on my system. But Ive updated DSM to update2 (what is possible in nanoboot by install/upgrade option) and system comes back to normal state. So I think there is a need to reinstall system. In my case thre was no data loss at all. But I have another problem with nanoboot. I want to have headless machine, system is installed directly on PC, but when I remove my graphic card nanoboot cant boot at all, I don`t see the where is a problem. Is there any option to boot up corectly without graphic card ? With gnoboot I don`t have such a problems. But I prefer nanoboot because of working DVB-T.

Link to comment
Share on other sites

Can we use any other PAT file or must be DSM_DS3612xs_4482.pat?

 

Possible to use DSM from other hardware, like DS412+ (DSM_DS412+_4482.pat) or DS413 (DSM_DS413_4482.pat) ?

 

Thank you,

Alex_G

Why? why would you even want to?

 

Same question. I really need to bootstrap my syno, but special package doesn't exist for 3612xs. It would be a solution to install another syno supported model.

Link to comment
Share on other sites

nanoboot 5.0.2.3

 

wol(wake on lan) is not working.

 

what should i do?

 

Unexpectedly! x64 or x86 ? Does it work in 5.0.2.2 ?

 

In my test environment is x64 but, x86 is the same problem

 

5.0.2.1 is working well

 

5.0.2.2~5.0.2.3 is not working

Link to comment
Share on other sites

In my test environment is x64 but, x86 is the same problem

 

5.0.2.1 is working well

 

5.0.2.2~5.0.2.3 is not working

 

What type of network card do you use?

 

 

onboard type . Gigabit LAN Realtek RTL8111F(PCI-E)

and Mainboard chipset is intel NM70(1037u)

Link to comment
Share on other sites

onboard type . Gigabit LAN Realtek RTL8111F(PCI-E)

and Mainboard chipset is intel NM70(1037u)

 

Try to add the following parameters:

rmmod=r8168,r8169_new insmod=r8169

 

ok, sovle the problem

 

wol is working well!

 

Thanks for your help!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...