I'm running Xpenology 6.1.7 on my I5 with 10GB Ram.
I used a 2108 6 gb/s LSI raid controller with 512 mb cache and attached 8x 7200 rpm 2.5 disks with raid 5 (on the controller itself).
When doing a local test on DSM i do not get more 30 MB/s, I did another test with Raid 10 (also on controller) it got even worse 20 MB/s. This is even worse then my other 2 disk setup with Raid 1, which is around 50 MB/s using Synology raid setup.
I teste 1GB, 2GB and 4GB files they give similar speed.
Does anyone have any tips on how to solve this, I know it is recommended is the french forum to not use the controller but that was more for the cheap controllers, I would not have expected a performance drop like this on the more expensive controllers.
Question
hemant
Hi guys,
I'm running Xpenology 6.1.7 on my I5 with 10GB Ram.
I used a 2108 6 gb/s LSI raid controller with 512 mb cache and attached 8x 7200 rpm 2.5 disks with raid 5 (on the controller itself).
When doing a local test on DSM i do not get more 30 MB/s, I did another test with Raid 10 (also on controller) it got even worse 20 MB/s. This is even worse then my other 2 disk setup with Raid 1, which is around 50 MB/s using Synology raid setup.
I teste 1GB, 2GB and 4GB files they give similar speed.
Does anyone have any tips on how to solve this, I know it is recommended is the french forum to not use the controller but that was more for the cheap controllers, I would not have expected a performance drop like this on the more expensive controllers.
Cheers,
Hemant
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.