Update from 6.2.1 to 6.2.2 (Insufficient capacity)

[gege34 1]

Hi,

 

My configuration is HP-Microserver Gen 8, with 16Go ram, Intel xenon and an intel Nic card.

I have Jun Loader 1.03b and DSM 3615 V6.2.1-23824 Update 6.

 

In the Update pannel, I have an update available, I suppose for the 6.2.2-24922, but the status is "Insufficient capacity for update. The system partition requires at least 540 MB."

I remember I have the same error (maybe not the same MB) when the upgrade from 6.1 to 6.2 was available. And I solve this by reinstall all the DSM with Synology Assistant.

 

I only see a post with the same problem but from an upgrade from 5.2 to 6 but without a solution.

Do you have any idea?

 

Thank you

 

[bearcat 47]

Hi, how big is your USB bootstick?

[gege34 1]

I use a 4GB SDcard.

I had the same problem when I upgrade from 6.0 to 6.1 and I reinstall all the system (on the same SDcard) but I would like to avoid this each time.

[Balrog 11]

I think that this issue has nothing to do with the boot sdcard. The error points to the first partition where the DSM itself is installed. I assume that maybe logfiles or something in this direction is filling up the space.
You can make a quick check if you connect as root via ssh and type "df -h" ("df" stands for "disk free" and "-h" for "human readable"). Then you get an overview over the partitions and the free space on it. Here an example:

root@joe:~# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md0 2.3G 1.2G 1.1G 52% /

I would use afterwards "ncdu / -x" which will output what directories and files are consuming the space. On my installation I have installed "optware-ng" and I am sure that "ncdu" is part of optware. So you must search for how installing "optware-ng" if you want use "ncdu".

An alternative which runs out of the box but without the nice navigation options from ncdu is "du -chx / | more". This command gives you also the output which folders and files are using the space on the root partition but just as a pure list without a navigation option.

I hope this helps to get an idea how to manage the problem with no space available for the update.

[gege34 1]

Thank you, I think my problem is here:

/dev/md0          2.3G  1.8G  391M  83% /

 

Now I need to find where I lost my space, I have 64M in /var/log but it's not sufficient.

[gege34 1]

I have installed (just unpack) the ncdu found here (binaries for Linux i486).

I have a .SynoUpgrade.tar (662Mo) at the root /

I don't know why it's here, but by removed it I successfully install the upgrade 😄

 

Thanks for your help.

[Balrog 11]

I have installed (just unpack) the ncdu found here (binaries for Linux i486).
I have a .SynoUpgrade.tar (662Mo) at the root /
I don't know why it's here, but by removed it I successfully install the upgrade
 
Thanks for your help.

Nice! I am glad that you found the reason for not having enough space on the system for an upgrade.

So this thread will be a good help for similar issues.