LittleLama Posted April 9, 2014 Share #1 Posted April 9, 2014 Hi! After having a Synology for years, I started two weeks ago in the experience of building a better NAS with XPenology. Here's my specs: DSM 5.0 4418 beta Trantor MB: Intel DH87RL CPU: Intel i5 4570 3.2Ghz DDR3 2x4Go 1333Mhz HDD: 3x Seagata NAS HDD 4To (2xRaid1 + 1xSolo) I had a HardDrive rack Icy Box, but un connected it to watch if it is the source of my errors (conclusion : no it isn't) Facts : All went really fine until saturday. I don't know what happened, maybe a power failure, but my system is really instable since and I must do resets often to get access to the NAS. After a reset, system startup fine, I can access almost everything except : - Backup/restort function : nothing dislays except in the task bar - Security : "No api" My firewall has been cleaned too. I planned usage log, but it seems it doesn't work. After a while, which is various, 5-10min, yesterday night 1 hour maybe more ... system is unreachable either by Windows Network, or Synology Assistant, or SSH. Ping on NAS is effective therefore, and I can find it with a network scanner. Errors displayed : On NAs screen, there are some messages displayed, but I don't know how to log them. Here are some of them, not displaying everytime. fixing recursive fault but reboot is needed And another long list of messages like : print_bad_pte+0x189/0x19f (There are decades of lines at the same time, I will log it) When NAS comes unreachable, nothing special to see on screen (he's moreover often black, maybe sleeping). I stopped every app in packet center, but it didnt solve my problem. Questions : Can you explain me how to log displayed messages on the NAS screen ? I'm trying to rescue datas from my raid 1 volume to the secondary hard drive. Will datas be in security there if reinstall XPenology ? I can add this HardDrive to another DSM installation as secondary volume ? Should I reinstall ? Downgrade to 4.3 ? Upgrade to gnoboot ? And what will happened to my datas on first volume (the raid 1 one) ? Thank you for all your lights. Link to comment Share on other sites More sharing options...
LittleLama Posted April 9, 2014 Author Share #2 Posted April 9, 2014 Here are some pics of screens. This first at startup (the last line didn't show up each time ... but each time there is a sync between the two radi 1 HDD) : This second didn't cause an access failure but, I don't understand it so I'm worried. This third however make a failure. After that, no way to access my NAS from web navigator (local access), nor Synology Assistant, nor SSH, nor FTP, nor Windows Browser ... Link to comment Share on other sites More sharing options...
LittleLama Posted April 27, 2014 Author Share #3 Posted April 27, 2014 I think there was a power cut and maybe a ram failure causing these troubles. Since I memtest Ram after replacing it, checking hard drives and re install DSM, all is fine. Envoyé d'un mobile Link to comment Share on other sites More sharing options...
Recommended Posts