Polanskiman

Please read the READ ME topic before posting:

 

Message added by Polanskiman

Recommended Posts

- Outcome of the install: SUCCESSFUL

- DSM version prior to update: DSM 6.2.2-24922 "DS3615xs v1.03b"

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - E3-1265L v3 / 16GB / LSI 2308-8i IT 

- Additional comments: Prior attempt to run DS918+ failed because old e3-1220v3 had no internal iGPU. Upgraded to 1265L v3 and migrated without problems

Share this post


Link to post
Share on other sites

- Outcome of the install: SUCCESSFUL - Partial

- DSM version prior to update: DSM 6.1.7-15284 - JUN'S LOADER v1.02b DS3615xs

- Loader version and model: Jun v1.03b - DS3615

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - AD2550R/USB3.

- Additional comments: Previous attempt at upgrade failed. seems to be a problem with having 2 VOLUMES. 1 is RAID1 2xHDD, the other SHR with 5xHDD, second volume not found

Share this post


Link to post
Share on other sites

- Outcome of the installation: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel D2500HN

Share this post


Link to post
Share on other sites

- Outcome of the update: FAILED

- DSM version prior to update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock J4205-ITX

- Additional comments: Seems to be unable to obtain IP address after update. Downgraded to 6.1.7 with v1.02b (DS916p) bootloader.

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Proliant MicroServer Gen8 | NIC: Intel 82574L CT - Adaptor Gigabit Ethernet i10Gb EXP9301CTBLK (no need to disable the other card in the bios)

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESFUL

- DSM version prior update: DSM 6.1.7-15284

- Loader version and model: JUN'S Loader v1.03b DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L With HP NC360T

- Additional comments: it works perfectly

Share this post


Link to post
Share on other sites

- Outcome of the update: FAILED

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type:  BAREMETAL - Asrock N3700-ITX

- Additional comments: No network after Reboot.

Share this post


Link to post
Share on other sites

- Outcome of the update: FAILED

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte GA-J3455N-D3H

- Additional comments: No IP address

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23793

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - w/ Intel 10Gbe NIC

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: FAILED

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Proliant MicroServer Gen8 

Share this post


Link to post
Share on other sites

- Outcome of the update: FAILED

- DSM version prior to update: DSM 6.1.4-15217

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock N3150-ITX

- Additional comments: No network after reboot, will try with dedicated LAN card

 

- Outcome of the update: FAILED

- DSM version prior to update: DSM 6.1.4-15217

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock N3050B-ITX

- Additional comments: No network after reboot, will try with dedicated LAN card

Edited by Bonebreaker777
Editing fonts

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - w/ Intel NIC / Gigabyte z68xp-ud4

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Dell T130 - New install /  4x4TB HDD, 2x256SSD cache, Dell H310 IT firmware, DSM Raid10, 10Gbps NIC

- Additional comments: Onboard Dual Broadcom® BCM5720 not working, Mellanox Connect-X2 working good.

But does not shut down from the dsm framework, it must be physically disabled.

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Dell PowerEdge T20 with No HDD, 4GB DIMM, Pentium G3220 3.0 GHz 2C 65W CPU, No Optical Drive 

- Additional comments: Didn't work migrating with 1.04B 918+ but worked with 1.03B 3615xs

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Microserver Gen 8

- Additional comments: restart + shutdown  NOT working (had to hard reset after update or any restart) / Extra HP NC365T Quad Gigabit PCI-E Card working / Onboard NICs not working

 

 

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Microserver Gen 7 N54L

- Additional comments: restart + shutdown NOT working (had to hard power-off after update or any restart/shutdown) / Extra HP NC365T Quad Gigabit PCI-E Card working / Onboard NIC not working

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESFUL

- DSM version prior update: DSM 6.1.7-15284

- Loader version and model: JUN'S Loader v1.03b DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus B250 ME, pentium G4600, 16gb ddr4 2400, 2 pcie to dual sata, dual intel NICs, sd cache, 1 raid 0, 1 raid 5, 1 raid 1, 1 stripe

- Additional comments: FLAWLESSLY

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: FAILED

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Motherboard ECS APLD-I, V.1.0, Intel Celeron J3355

- Additional comments: No network after reboot

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  Intel NUC NUC5CPYH

 

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus TUF B450-PLUS GAMING (Realtek RTL8111H) - Ryzen 3 2200G - 8 GB DDR4

- Additional comments: Reboot

Share this post


Link to post
Share on other sites

Outcom e of the update: SUCCESSFULL

- DSM version prior update: DSM 6.2.1-23824

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL – HP Microserver N40L(BiosMod); onboard NIC disabled, HP NC-360T

- Additional comments: restart + shutdown NOT working properly (had to manual restart/shutdown after update). Problem seems to be solved after disabling OB NIC atheros

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh install

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: Yes

- Installation type: BAREMETAL - HP Gen8 Micro 12Gb i5 3470T - Dell H310 w/LSI 9211-8i P20 IT Mode + extension Rack of SAS/SATA mixed HDD

- Additional comments: Onboard Dual Broadcom NiC working no need of additionnal NiC ...

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U4

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: real3x mod

- Installation type: BAREMETAL - ASRock N3700-ITX

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: Testversion 0.7 from IG-88

- Installation type: BAREMETAL - ASRock J4205-ITX with a Intel i210 NIC (OnBoard Realtek disabled)

- Additional comments: I had to delete the /usr/lib/modules/update/* folder and also drm.ko, drm_kms_helper.ko and i915.ko

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922 (DSM 6.2-23739 on the other hand worked great)

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs (v1.04b did not work)

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Proliant ML10 (XEON E3-1270 CPU)

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: Fresh install

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: Yes (IG-88's ramdisk v0.5_test)

- Installation type: BAREMETAL - HP Gen8 Micro 16Gb e3-1265L

- Additional comments: Onboard Dual Broadcom NiC working no need of additionnal NiC ...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.