Polanskiman

Please read the READ ME topic before posting:

 

Message added by Polanskiman

Recommended Posts

Posted (edited)

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock H97M-ITX/ac - i3 4150

Edited by Aiglon

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS H81M-K - Intel Celeron G1820 - Realtek® 8111G, 1 x Gigabit LAN Controller

  • Thanks 1

Share this post


Link to post
Share on other sites

- Outcome of the update: FAILED

- DSM version prior update: DSM 6.1.7-15284 - JUN'S LOADER v1.02b DS3615xs

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L 

- Additional comments: No network after install. Did not add the additional network card with intel chipset for the moment (ie HP NC360T). I will update my post when new hardware will be installed.

Share this post


Link to post
Share on other sites

@bearcat Yes off topic, reason why your post has been removed. For moderation purposes please contact a moderator who will do the necessary or you can also use the "Report post" link on the upper right hand side of each post. Thank you.

  • Thanks 2

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Proliant N36L

- Additional notes: Onboard NIC will not work. I use the HP NC360T Dual-Port Gigabit NIC PCI-E Server Adaptor

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: -- clean installation --

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - Terramaster F2-220 (4Gb Ram + Network Gigabit Realtek)  - ESXi 6.7 U2 (vSphere Hypervisor free)

- Additional comments: Need VM network NIC E1000e

 

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL
- DSM version prior update:  DSM 6.2.1-23824 Update 6
- Loader version and model:  Jun's  v1.04b DS918+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - MSI B150M ECO
- Additional comments:  REBOOT REQUIRED

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - with 2 HP Proliant N54L - 4 Gb RAM

- Additional notes: Reboot required - I use an Intel i350-T2 Dual-Port Gigabit NIC PCI-E Server Adapter - WOL and Power Button OK

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - N40L with NC360T NIC

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: Jun v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus Rampage III Gene / Xeon X5650 / Onboard Intel NIC and Intel PRO/1000 PT

- Additional comments: Onboard and expansion NICs operational and bonded

Share this post


Link to post
Share on other sites

- Outcome of the update: FAILED

 - DSM version prior update: DSM 6.2.1-23824 Update 6 - JUN'S LOADER v1.04b DS918+

- Loader version and model: JUN'S LOADER v1.04b

DS918+- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ZBOX-CI325NANO, Intel N3160, 16GB DDR3 SODIMM, Realtek NIC x 2

- Additional comments: No network after install. No boot loop.

 

- Outcome of the update: FAILED

 - DSM version prior update: DSM 6.2.1-23824 Update 6 - JUN'S LOADER v1.04b DS918+

- Loader version and model: JUN'S LOADER v1.04b

DS918+- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Lenovo m91p, Intel i7-4950HQ, 16GB DDR3 SODIMM, Intel NIC x 1

- Additional comments: No network after install. No boot loop.

  • Thanks 1

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2 Update 2 and 6.2.1 Update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7u1

- Additional comments: Reboot required. Had to change all attached VM disks to SATA (no SCSI), NIC to e1000e, and USB 3.0 controller only (2.0 causes hang on boot).

Share this post


Link to post
Share on other sites

- Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: Baremetal - Intel NUC - NUC7PJYH1

- Additional comments: Can't be found on the network after the update. Uses the Realtek 8111H network controller.

Share this post


Link to post
Share on other sites

- Outcome of the update: FAILED

 - DSM version prior update: DSM 6.2.1-23824 Update 6 - JUN'S LOADER v1.04b DS918+

- Loader version and model: JUN'S LOADER v1.04b

DS918+- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK J4105

- Additional comments: No network after install. Additionnal network card Intel (R) EXPI9301CTBLK don't work

  • Thanks 1

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1 Update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Lenovo Tiny Thinkcentre M910Q (i7-7500T)

 - Additional comments: NVME slot does not work.

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Laptop Lenovo X230

- Additional comments: Updated via built-in update utility

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: HP Elite 8300, integrated NIC Intel 82579LM

- Additional comments:

Share this post


Link to post
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - ASRock QC5000-ITX/PH

- Additional comments: PCI Intel 82574L Chipset

https://fr.aliexpress.com/item/32921496414.html?spm=a2g0s.9042311.0.0.7e6f6c37De0keb

Share this post


Link to post
Share on other sites

- Outcome of the installation:  SUCCESSFUL

- DSM version prior update: N/A, from scratch

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Elitedesk 800 G1 / Pentium G3220

Share this post


Link to post
Share on other sites

- Outcome of the Installation: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 4

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK Z390M-ITX/AC, Intel Core i7 8700, 16GB RAM on U-NAS 410 Chassis with Noctua NH-L9i CPU fan

Share this post


Link to post
Share on other sites

- Outcome of the update:  FAILED

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's Loader v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock J4105-ITX

- Additional comments: Used a cheap Chinese NIC /w a Intel chip (Winyao WY573T /w Intel 82573). LED indicators of the network card turned off right after the "happy hacking" screen.

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: FAILED

- DSM version prior update: DSM 6.1.7-15284

- Loader version and model: DS3615xs with Jun v1.02b

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L

- Additional comments: Network doesn't work with Internal NIC. I bought HP NC360T on ebay.  I will test when the card has arrived

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L + NIC Intel-Pro PCIE 2ports Gigabits

Share this post


Link to post
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: Jun v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM - Proxmox VE 5.4.1

- Additional comments: qm set <vmid> --args "-netdev type=tap,id=net0,ifname=tap<vmid>i0 -device e1000e,mac=02:0A:FB:AA:EC:BE,netdev=net0,bus=pci.0,addr=0x12,id=net0”

Share this post


Link to post
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP Microserver Gen 8  

- Additional comments: restart + shutdown  OK / Extra Intel NIC

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.