Jump to content
XPEnology Community

DSM 6.2.2-24922


Flotho
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: VM - Proxmox - KVM

Edited by Polanskiman
changed text color
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP G7 N54L  

- Additional comments: restart + shutdown  OK / Extra Intel NIC, ACPI Bios configured to Version 1.0.

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte GA-H110m DS2 - i3 6320

- Additional comments: restart + shutdown  Ok,  onboard NIC disabled, Intel Gigabit CT Desktop NIC, CPU Temperature not shown (always at 40°)

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.1-23824 Update 6
- Loader version and model: Jun's Loader v1.04b - DS918 +
- Installation type: BAREMETAL - Gigabyte GA-B150M-HD3
- Additional comments: a reboot is required, not something has flown away!

Link to comment
Share on other sites

- Outcome of the installation/update: FAILED

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: Jun 1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - (Asrock D1800M)

- Additional comments: NONE

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Dell Optiplex 7010 i5-3470, 8 GB RAM

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3455 ITX

- Additional comments: problem with reboot still existing, need to restart manually and it took nearly 15 min after restart, to bring the DSM back to live

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL- Gigabyte GA-B85M-D3H (rev. 1) - NIC Realtek onboard

- Additional comments: none

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Desktop Board DQ77MK - i5-3330

- Additional comments: None

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte GA-H170N-WIFI - G4600

- Additional comments: DUAL INTEL ONBOARD NIC

Link to comment
Share on other sites

- Outcome of the installation SUCCESSFUL

- DSM version prior update: N/A

- Loader version and model: Jun v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Zotac NM10-DTX-D / DUAL INTEL PCI-E NIC

- Additional comments: Tried a net new install to prove to myself that the ASRock J3455M was faulty (swapped ASrock for Zotac MB). I have 2 other ASrock J3455M and neither will upgrade to 6.2.2, using v1.04b both with PCI-E Intel NIC and both have no network after update.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP Elite 8300, integrated NIC Intel 82579LM

- Additional comments: Have to convert USB key partition table in hybrid mode to work.

  • Thanks 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Supermicro X9SCL+-F with both SATA (6 ports) and SAS (9211-8i IT connected to 16 disk expander backplane) and dual onboard Intel (82574L) NICs.

- Additional comments: Had to restore /etc.defaults/synoinfo.conf to previous values to resolve crashed volume error and then repair a failed system partition on one of the disks - back up and running within a few minutes.

Edited by leonroy
Link to comment
Share on other sites

- Outcome of the update: FAILED

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock J4105-ITX

Should anybody who managed to upgrade on this mobo please share ideas.

Edited by Polanskiman
This is not a topic to ask questions or for discussions. If you have specific issues create a topic in the appropriate section of the forum.
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS B150M / i5 6500

- Additional comments: Also added LSI IT Mode 9207-8i SATA/SAS card successfully / reboot required

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L 

- Additional comments: Need to add an additional network card (HP NC360T) as the internal NIC is not working higher than DSM 6.2, internal NIC deactivated within BIOS settings, updated directly via DSM

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - Cisco UCS C220 M3 - ESXi 6.7.0 Update2 Build 13644319

- Additional comments: Need to change NIC type from E1000 to E1000e and use SATA controller.

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - Intel W2500CR2, E5-2660x2  - vSphere 6.7.0.2000, ESXi 6.7.0 Build 10302608, 

- Additional comments: Use 2 x SATA Controller (0 for img, 1 for others); NIC: VMXNET 3

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23922

- Loader version and model: JUN'S LOADER v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type:  BAREMETAL - ASUS ROG STRIX Z390 I GAMING, Intel - Core i3-8100 3.6 GHz Quad-Core Processor

- Additional comments: AMAZON USB 3.0 GIGABIT ETHERNET NIC Working (0B95 1790), I/O Crest M.2 (B & M-Key) PCIe Interface Single Port Gigabit Ethernet Modules NIC RealTek RTL8111 Chipset Working  (Good option for those with no usb nic or working internal but board has m.2 if you can fit it in your case mine is mounted under mobo very janky but works make sure to read pinout direction in manual). I 219 V Internal NIC not working (Known Issue) 8086 15bc for my mobo.

  • Thanks 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 Update 3

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS H110l plus - Core i5 7500 - 8G RAM

- Additional comments: Need to add an additional network card (HP NC360T)

Link to comment
Share on other sites

- Outcome of the update: FAILED

- DSM version prior to update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J5005-ITX

 - Additional comments: No network at boot

  • Sad 1
Link to comment
Share on other sites

- Outcome of the fresh Install: SUCCESSFUL

- DSM version prior update: tried both update from 6.2 update2 and Fresh install of 6.2.2

- Loader version and model: Jun's  v1.03b DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen8, Xeon E3-1220L, 12GB ram, loader on micro SD card, E1G42ETG1P20 NIC with Intel chipset

- Additional comments: You need a Intel NIC instead of on board NIC from gen 8 machine, I bought a E1G42ETG1P20 with dual ports(with intel chipset card) for my case. Internal NIC can only run up to 6.2 with update2. If you want to upgrade to 6.2.2, you have to get an Intel NIC or you cannot find your DSM in your network otherwise.

Link to comment
Share on other sites

- Outcome of the update: FAILED
- DSM version prior to update: DSM 6.2-23739
- Loader version and model: Jun v1.04b - DS918
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - GA-J3455-D3H
- Additional comments: i915 driver loop KP

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: -- clean installation using 6.2 image --

- Loader version and model: JUN'S LOADER v1.03b - DS3617

- Using custom extra.lzma: NO

- Installation type: VM - Intel W2500CR2, E5-2660x2  - vSphere 6.7.0.2000, ESXi 6.7.0 Build 10302608 

- Additional comments: Use 2 x SATA Controller (0 for img, 1 for others); NIC: E1000E

Link to comment
Share on other sites

- Outcome of the installation/update: UNSUCCESSFUL

- DSM version prior update: DSM_DS3617xs_23739

- Loader version and model: JUN'S LOADER v1.03b - DS3617

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Hp Mediavault EX485 with upgraded E8200 Processor

- Additional comments: after reboot no network connection. Luckily I have learned so now I have an extra hard drive and flash drive for testing. Learned

after last time when I just went for it and had to do everything over again. 🤣

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...