siulman Posted May 14, 2019 Share #76 Posted May 14, 2019 Outcome of the update: SUCCESSFUL DSM version prior to update: DSM 6.2.1 update 6 Loader version and model: Jun v1.03b - DS3615xs Installation type: BAREMETAL HP Proliant gen 8 + Intel NIC on PCIe Quote Link to comment Share on other sites More sharing options...
Joe Bethersonton Posted May 14, 2019 Share #77 Posted May 14, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 6.2.1-23824 update 6 - Loader version and model: Jun v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock H370M-ITX/ac - i5-8400 Additional Notes: Reboot required after update. I never used the second NIC -so haven't tested it. Quote Link to comment Share on other sites More sharing options...
cferra Posted May 14, 2019 Share #78 Posted May 14, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 6.2.1-23824U6 - Loader version and model: Jun v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Xeon E3-1270v2 - SuperMicro X9SCM-F - Mellanox Connect-X 3 - LSI 9201-16i - Additional comment: I had to re-modify the synoinfo.conf file to enable more than 8 disks - after this was completed, the array came back up as normal. Quote Link to comment Share on other sites More sharing options...
PeterC Posted May 14, 2019 Share #79 Posted May 14, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 6.2.1-23824 Update 6 - Loader version and model: Jun v1.04b - DSDS918 - Installation type: VirtualBox on Windows 10 (1803; Threadripper 1950X; 64 GB RAM) - Additional comment: VM - VBox [ Other Linux 64 bit; 4 cores, 8 GB RAM; VMSVGA; bridged LAN to host's Intel(R) I211 Gigabit adaptor; rest is vanilla VBox] Quote Link to comment Share on other sites More sharing options...
compuman Posted May 14, 2019 Share #80 Posted May 14, 2019 - Outcome of the update: UNSUCCESSFUL - DSM version prior to update: DSM 6.2.1-23824 Update6 - Loader version and model: Jun v1.04b - DS918 - Using custom extra.lzma: NO - Installation type: BAREMETAL - Terramaster F2-220 - Additional comment: Failure - no network (Realtek) Quote Link to comment Share on other sites More sharing options...
Captainfingerbang Posted May 14, 2019 Share #81 Posted May 14, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 6.2.1-23824 update 6 - Loader version and model: Jun v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Supermicro X10sll-f - E3-1225v3 CPU Additional Notes: None Quote Link to comment Share on other sites More sharing options...
Captainfingerbang Posted May 14, 2019 Share #82 Posted May 14, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 6.2.1-23824 update 6 - Loader version and model: Jun v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - MSI B250m Mortar - Pentium G4560 Additional Notes: None Quote Link to comment Share on other sites More sharing options...
djwayne1985 Posted May 15, 2019 Share #83 Posted May 15, 2019 (edited) - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: No - Installation type: BAREMETAL - HP Proliant N54L - Additional notes: Onboard NIC will not work. I use the HP NC360T Dual-Port Gigabit NIC PCI-E Server Adaptor Edited June 8, 2019 by Polanskiman Added additional notes. Quote Link to comment Share on other sites More sharing options...
advin Posted May 15, 2019 Share #84 Posted May 15, 2019 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 - Loader version and model: Jun v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Core i3-8100t GIGA-BYTE H370 AORUS GAMING 3 WIFI Quote Link to comment Share on other sites More sharing options...
ercan1441 Posted May 15, 2019 Share #85 Posted May 15, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 6 - Loader version and model: Jun's loader v1.03b, DS3615xs - Using custom extra.lzma: NO - Installation type: VM - ESXi 6.5.0 Update 2 (Build 9298722) on Microserver Gen8 Quote Link to comment Share on other sites More sharing options...
Hostilian Posted May 15, 2019 Share #86 Posted May 15, 2019 - Outcome of the installation/update: UNSUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 update 6 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock J3455 - Additional comments: Not pinging after manual reboot.. Tried leaving it 10 mins, then rebooting again. Nothing. I did have a NIC Bond configured (maybe I should have removed the bond beforehand like I normally do). I've tried switching the cables to other ports. Using only the PCIe NIC etc.. Nothing so far - currently troubleshooting, sigh.. Quote Link to comment Share on other sites More sharing options...
Lestat Posted May 15, 2019 Share #87 Posted May 15, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 6 - Loader version and model: Jun's Loader v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver N40L - Additional comments: HP NC360T Dual NIC (disabled the embedded one) - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 6 - Loader version and model: Jun's Loader v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver Gen 8 - Additional comments: HP NC360T Dual NIC (disabled the embedded one) Quote Link to comment Share on other sites More sharing options...
mervincm Posted May 17, 2019 Share #88 Posted May 17, 2019 The outcome of the update: SUCCESSFUL DSM version prior to update: DSM 6.2.1-23824U6 Loader version and model: Jun v1.04b - DS918 Using custom extra.lzma: NO Installation type: BAREMETAL - ASUS Prime Z390-A - i3-8100 64GB Intel 10GbE NIC Additional comments: I was not sure if it would work, so I added a spare disk, turned off, disconnected all but new disk, turned on, upgraded to 6.22, restarted confirmed working, turned off, reconnected all disks, turned on, repaired failed system partition, restarted, 100% OK! Quote Link to comment Share on other sites More sharing options...
netember Posted May 17, 2019 Share #89 Posted May 17, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 6 - Loader version and model: Jun's Loader v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL Fujitsu-Siemens Esprimo P700 E85+ (I5+8 GB DDR3) - Additional comments: No Quote Link to comment Share on other sites More sharing options...
michel30 Posted May 17, 2019 Share #90 Posted May 17, 2019 Outcome of the update: SUCCESSFUL - DSM version before update: DSM 6.2.1-23824 Update 6 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: No - Installation type: BAREMETAL - Dell Optiplex 980 - Additional comments: No. Quote Link to comment Share on other sites More sharing options...
MoriNoKodomo Posted May 17, 2019 Share #91 Posted May 17, 2019 Outcome of the update: SUCCESSFUL - DSM version before update: DSM 6.2.2-24922 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: No - Installation type: BAREMETAL - Fujitsu PRIMERGY TX120 S3p - Additional comments: No 1 Quote Link to comment Share on other sites More sharing options...
BanterBay Posted May 17, 2019 Share #92 Posted May 17, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior to update: DSM 6.2.1-23824 Update 6 - Loader version and model: Jun v1.04b - DS918 - Using custom extra.lzma: NO - Installation type: BAREMETAL - DELL POWEREDGE T20 Xeon E3-1225V3 - Additional comments: The update went seamless. It reboots ok and performs very well. 2 Quote Link to comment Share on other sites More sharing options...
Nick4 Posted May 18, 2019 Share #93 Posted May 18, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 6 - Loader version and model: Jun v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Gigabyte H270N, Intel i3 7100T - Additional comments: Reboot required Quote Link to comment Share on other sites More sharing options...
qwertyqwerty Posted May 19, 2019 Share #94 Posted May 19, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 - Loader version and model: Jun's Loader v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - MSI B150M PRO-VD D3 - Additional comments: reboot required Quote Link to comment Share on other sites More sharing options...
ronald75 Posted May 20, 2019 Share #95 Posted May 20, 2019 - Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 6 - Loader version and model: Jun's V1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - DELL PowerEdge T30 with Intel Xeon Quote Link to comment Share on other sites More sharing options...
psix048 Posted May 21, 2019 Share #96 Posted May 21, 2019 - Outcome of the update: FAILED - DSM version prior update: DSM 6.2.1-23824 Update 6 - Loader version and model: v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock J3355M - Additional comments: embedded Realtek and|or Intel 9301 both no link - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824 Update 6 - Loader version and model: Jun's v1.03b DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asrock J3355M - Additional comments: Legacy boot only, Realtek not work at all, everything else is fine. Migrated from 918. Quote Link to comment Share on other sites More sharing options...
BlaBla1973 Posted May 21, 2019 Share #97 Posted May 21, 2019 - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.1-23824U6 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port - Additional comments: REBOOT REQUIRED Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted May 22, 2019 Share #98 Posted May 22, 2019 I have deleted yet again a bunch of posts that are not in line with the guidelines of this sub-forum. Please read the READ ME topics at the root of this sub-forum! 1 Quote Link to comment Share on other sites More sharing options...
nemesis122 Posted May 22, 2019 Share #99 Posted May 22, 2019 - Outcome of the fresh Install: SUCCESSFUL - DSM version prior update: Fresh Install - Loader version and model: Jun's v1.03b DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Gen8 with Xeon 1240v2 processor and SFP+ Intel X520 DA2 Nic - Additional comments: Fresh Install 1.03B / Pat 24922 DSM 3615 all is working perfect and very fast - Outcome of the fresh Install: UNSUCCESSFUL - DSM version prior update: Fresh Install - Loader version and model: Jun's v1.03b DS3615+xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asus H97Iplus with Xeon 1245v and SFP+ Intel X520 DA2 Nic - Additional comments: No Diskstation in LAN Found - Outcome of the fresh Install: SUCCESSFUL - DSM version prior update: Fresh Install - Loader version and model: Jun's v1.04b DS918+xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Asus H97Iplus with Xeon 1245v and SFP+ Intel X520 DA2 Nic - Additional comments: 24922 Installed sucessull but it is only working when NO Monitor is connected on the server when a Monitor is connected DSM not boot Quote Link to comment Share on other sites More sharing options...
xtronets Posted May 22, 2019 Share #100 Posted May 22, 2019 - Outcome of the fresh Install: SUCCESSFUL - DSM version prior update: Fresh Install - Loader version and model: Jun's v1.04b DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - MSI B85-G43 i5 4460 Realtec NIC - Additional comments: 24922 Installed sucessull but it is only working when NO Monitor is connected on the server when a Monitor is connected DSM not boot Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.