Jump to content
XPEnology Community

DSM 6.2.2-24922


Flotho
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824 update 6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock H370M-ITX/ac - i5-8400

Additional Notes: Reboot required after update. I never used the second NIC -so haven't tested it.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824U6

- Loader version and model: Jun v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Xeon E3-1270v2 - SuperMicro X9SCM-F - Mellanox Connect-X 3 - LSI 9201-16i
- Additional comment: I had to re-modify the synoinfo.conf file to enable more than 8 disks - after this was completed, the array came back up as normal.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun v1.04b - DSDS918

- Installation type: VirtualBox on Windows 10 (1803; Threadripper 1950X; 64 GB RAM)

- Additional comment: VMVBox [ Other Linux 64 bit; 4 cores, 8 GB RAM; VMSVGA;  bridged LAN to host's Intel(R) I211 Gigabit adaptor; rest is vanilla VBox]

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824 Update6

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Terramaster F2-220

- Additional comment: Failure - no network (Realtek)

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.2-24922

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - HP Proliant N54L

- Additional notes: Onboard NIC will not work. I use the HP NC360T Dual-Port Gigabit NIC PCI-E Server Adaptor

Edited by Polanskiman
Added additional notes.
Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.2-24922

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Core i3-8100t   GIGA-BYTE  H370 AORUS GAMING 3 WIFI

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's loader v1.03b, DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.5.0 Update 2 (Build 9298722) on Microserver Gen8

 

Link to comment
Share on other sites

- Outcome of the installation/update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3455

- Additional comments: Not pinging after manual reboot.. Tried leaving it 10 mins, then rebooting again. Nothing. I did have a NIC Bond configured (maybe I should have removed the bond beforehand like I normally do).  I've tried switching the cables to other ports. Using only the PCIe NIC etc.. Nothing so far - currently troubleshooting, sigh..

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver N40L
- Additional comments: HP NC360T Dual NIC (disabled the embedded one)

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen 8
- Additional comments: HP NC360T Dual NIC (disabled the embedded one)

Link to comment
Share on other sites

The outcome of the update: SUCCESSFUL

DSM version prior to update: DSM 6.2.1-23824U6

Loader version and model: Jun v1.04b - DS918

Using custom extra.lzma: NO

Installation type: BAREMETAL - ASUS Prime Z390-A - i3-8100 64GB Intel 10GbE NIC

Additional comments: I was not sure if it would work, so I added a spare disk, turned off, disconnected all but new disk, turned on, upgraded to 6.22, restarted confirmed working, turned off, reconnected all disks, turned on, repaired failed system partition, restarted, 100% OK!

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL Fujitsu-Siemens Esprimo P700 E85+ (I5+8 GB DDR3)

- Additional comments: No

Link to comment
Share on other sites

 Outcome of the update:  SUCCESSFUL

- DSM version before update: DSM 6.2.1-23824 Update 6

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Dell Optiplex 980

- Additional comments: No.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior to update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - DELL POWEREDGE T20 Xeon E3-1225V3
- Additional comments: The update went seamless. It reboots ok and performs very well.

Synology Updates.PNG

  • Like 2
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte H270N, Intel i3 7100T

- Additional comments: Reboot required

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's V1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - DELL PowerEdge T30 with Intel Xeon

Link to comment
Share on other sites

 

- Outcome of the update: FAILED

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3355M

- Additional comments: embedded Realtek and|or Intel 9301 both no link

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 6

- Loader version and model: Jun's  v1.03b DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J3355M

- Additional comments: Legacy boot only, Realtek not work at all, everything else is fine. Migrated from 918.

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824U6

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Intel Pentium G4560 / GiBy GA-B250-HD3P B250 / 8GB / LSI SAS 9211-8i (IT) / Intel Pro-1000/PT PCI-e Dual Port 

- Additional comments: REBOOT REQUIRED

Link to comment
Share on other sites

- Outcome of the fresh Install: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: Jun's  v1.03b DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Gen8 with Xeon 1240v2  processor and SFP+ Intel X520 DA2 Nic

- Additional comments: Fresh Install 1.03B / Pat 24922 DSM 3615 all is working perfect and very  fast

 

- Outcome of the fresh Install: UNSUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: Jun's  v1.03b DS3615+xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus H97Iplus with Xeon 1245v and SFP+ Intel X520 DA2 Nic

- Additional comments: No Diskstation in LAN Found

 

- Outcome of the fresh Install: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: Jun's  v1.04b DS918+xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus H97Iplus with Xeon 1245v and SFP+ Intel X520 DA2 Nic

- Additional comments: 24922 Installed sucessull but it is only working when NO Monitor is connected on the server when a Monitor is connected DSM not boot

Link to comment
Share on other sites

- Outcome of the fresh Install: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: Jun's  v1.04b DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI B85-G43 i5 4460 Realtec NIC

- Additional comments: 24922 Installed sucessull but it is only working when NO Monitor is connected on the server when a Monitor is connected DSM not boot

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...