Jump to content
XPEnology Community

Cross compile AACRAID


SegLoad

Recommended Posts

Bonsoir à tous.

 

Me voilà nouveau dans le monde des syno, plus particulièrement xpenology.

Je posséde un serveur fait maison avec un carte Adaptec 6805e.

J'ai essayé de compilé le driver, le mettre dans le xpenology et quand je donne un coup de insmod, voici ce que j'ai :

 

[   43.234587] Adaptec aacraid driver 1.1-7[28000]-ms
[   43.234689] aacraid 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   43.234744] aacraid 0000:02:00.0: setting latency timer to 64
[   43.838696] AAC0: kernel 5.2-0[18512] Jun  6 2011
[   43.838762] AAC0: monitor 5.2-0[18512]
[   43.838817] AAC0: bios 5.2-0[18512]
[   43.838874] AAC0: serial 1A4511D098E
[   43.838927] AAC0: Non-DASD support enabled.
[   43.838975] AAC0: 64bit support enabled.
[   43.839045] AAC0: 64 Bit DAC enabled
[   43.853374] scsi9 : aacraid
[   43.869253] scsi 9:1:2:0: Direct-Access     Maxtor   6L200M0                  BANC PQ: 1 ANSI: 5
[   43.869343] BUG: unable to handle kernel paging request at ffff880336475a00
[   43.869464] IP: [] scsi_sysfs_add_sdev+0x2a/0x234
[   43.869555] PGD 1606063 PUD 0
[   43.869672] Oops: 0000 [#1] SMP
[   43.869789] CPU 1
[   43.869827] Modules linked in: aacraid(+) cifs udf isofs loop nfsd exportfs rpcsec_gss_krb5 usbhid hid usblp usb_storage uhci_hcd etxhci_hcd xhci_hcd ohci_hcd ehci_hcd bromolow_synobios(P) btrfs zlib_deflate libcrc32c hfsplus md4 hmac ixgbe be2net igb(O) i2c_algo_bit e1000e(O) dca fuse vfat fat cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc chainiv des_generic crc32c eseqiv krng ansi_cprng cts rng aes_generic md5 cbc cryptomgr pcompress aead crypto_hash crypto_blkcipher crypto_wq crypto_algapi cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand mperf processor thermal_sys cpufreq_stats freq_table dm_snapshot crc_itu_t crc_ccitt quota_v2 quota_tree usbcore psnap p8022 llc usb_common ipv6 sg sk98lin(O) r8169 r8168(O) bnx2(O) tg3(O) alx(O) mdio compat(O)
[   43.870008]
[   43.870008] Pid: 14146, comm: insmod Tainted: P         C O 3.2.40 #57 System manufacturer System Product Name/F1A75
[   43.870008] RIP: 0010:[]  [] scsi_sysfs_add_sdev+0x2a/0x234
[   43.870008] RSP: 0018:ffff8801358f7728  EFLAGS: 00010246
[   43.870008] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002
[   43.870008] RDX: 0000000000000021 RSI: 0000000000000002 RDI: ffff88013418b800
[   43.870008] RBP: ffff88013418b800 R08: 000000000000fa6c R09: ffff880139f6a668
[   43.870008] R10: ffff88013e018000 R11: ffffffff811a97c5 R12: ffff880336475800
[   43.870008] R13: ffff88013418b800 R14: ffff880134c36240 R15: ffff880136469080
[   43.870008] FS:  00000000006fc880(0000) GS:ffff88013ec80000(0063) knlGS:00000000f75a9b40
[   43.870008] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
[   43.870008] CR2: ffff880336475a00 CR3: 0000000136734000 CR4: 00000000000006e0
[   43.870008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   43.870008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   43.870008] Process insmod (pid: 14146, threadinfo ffff8801358f6000, task ffff88013687b850)
[   43.870008] Stack:
[   43.870008]  0000000000000005 ffff88013418b800 ffffffff814f19d1 0000000000000001
[   43.870008]  0000000000000000 ffffffff81204e56 ffff880134782160 0000000000000001
[   43.870008]  ffff880100000005 ffffffff814f19d1 ffff8801358f7808 ffff8801358f7a28
[   43.870008] Call Trace:
[   43.870008]  [] ? scsi_probe_and_add_lun+0xa82/0xbd3
[   43.870008]  [] ? __scsi_scan_target+0x94/0x481
[   43.870008]  [] ? sysfs_link_sibling+0xb3/0xc6
[   43.870008]  [] ? sysfs_addrm_finish+0x28/0x99
[   43.870008]  [] ? sysfs_add_one+0x15/0x9d
[   43.870008]  [] ? scsi_scan_channel+0x4e/0x80
[   43.870008]  [] ? scsi_scan_host_selected+0x99/0xdb
[   43.870008]  [] ? aac_probe_one+0x3cc/0x485 [aacraid]
[   43.870008]  [] ? local_pci_probe+0x12/0x16
[   43.870008]  [] ? pci_device_probe+0x5b/0x83
[   43.870008]  [] ? driver_probe_device+0x99/0x11c
[   43.870008]  [] ? driver_probe_device+0x11c/0x11c
[   43.870008]  [] ? __driver_attach+0x45/0x61
[   43.870008]  [] ? bus_for_each_dev+0x43/0x75
[   43.870008]  [] ? 0xffffffffa0350fff
[   43.870008]  [] ? bus_add_driver+0xb2/0x201
[   43.870008]  [] ? 0xffffffffa0350fff
[   43.870008]  [] ? driver_register+0x95/0x101
[   43.870008]  [] ? 0xffffffffa0350fff
[   43.870008]  [] ? __pci_register_driver+0x4f/0xb0
[   43.870008]  [] ? 0xffffffffa0350fff
[   43.870008]  [] ? aac_init+0x37/0x77 [aacraid]
[   43.870008]  [] ? do_one_initcall+0x79/0x127
[   43.870008]  [] ? sys_init_module+0x105c/0x11fe
[   43.870008]  [] ? fput+0x175/0x196
[   43.870008]  [] ? filp_close+0x64/0x6c
[   43.870008]  [] ? cstar_dispatch+0x7/0x2b
[   43.870008] Code: ff 41 56 be 02 00 00 00 41 55 49 89 fd 41 54 55 53 4c 8b 77 08 4c 8b a7 f8 00 00 00 e8 1a a8 ff ff 85 c0 89 c3 0f 85 fd 01 00 00 <41> 83 bc 24 00 02 00 00 01 75 56 49 8d 6c 24 28 48 89 ef e8 b6
[   43.870008] RIP  [] scsi_sysfs_add_sdev+0x2a/0x234
[   43.870008]  RSP 
[   43.870008] CR2: ffff880336475a00
[   43.870008] ---[ end trace 3af445caf1243df6 ]---

 

Evidemment, pas la moindre trace des disques durs reliés a ce contrôleur...

 

Ai-je fais une erreur quelque part?

 

EDIT : DSM v5

Link to comment
Share on other sites

×
×
  • Create New...