ejwarrior Posted February 23, 2019 Share #1 Posted February 23, 2019 Hi everyone I'm running my first Xpenlogy but running with a small problem here is it Specs Motherboard: MSI Z170 Ram: 8GB DDR4 CPU: Intel Pentium g4400 DRM 6.2.1 Everything is working fine the only problem I have is that my transfer speed is not more than 6 MB/s and the network status on Synology is only ad 100 Mbps, half duplix, MTU1500 Any help would be appreciated Thank. Quote Link to comment Share on other sites More sharing options...
bearcat Posted February 24, 2019 Share #2 Posted February 24, 2019 1 - Try another network cable, and use a different port on your router/switch, reboot your NAS. Quote Link to comment Share on other sites More sharing options...
Olegin Posted February 24, 2019 Share #3 Posted February 24, 2019 What NIC(s) is in mb? Quote Link to comment Share on other sites More sharing options...
ejwarrior Posted February 24, 2019 Author Share #4 Posted February 24, 2019 Thanks I found the problem, it was my switch after changing the setting to automatic the speed when back to normal. My switch is a Netgear GS105Ev2 for those that maybe are having the same problem just go in to the webinterface and set speed settings to automatic. Quote Link to comment Share on other sites More sharing options...
Popeye-DR Posted January 5, 2020 Share #5 Posted January 5, 2020 I have the same MSI Z170 motherboard, but I cannot not get Xpenlogy to be recognize with the http://find.synology.com/. I have added the MAC but the lights on the NIC does not turn on. Do I need to change any configuration on the BIOS? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.