Jump to content
XPEnology Community

DSM 6.2.1-23824 Update 6


XerSonik
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

377147675_2019-02-228_04_21.thumb.png.9eb1cf1539432459c2500879a27528a1.png

 

Release notes:

https://www.synology.com/en-global/releaseNote/DS3615xs

 

 


(2019-02-19)

Important Note

The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

This update will restart your Synology NAS if you are using the models listed below.

Plus Series : DS218+, DS718+, DS918+, DS1019+

Value Series : DS418play

Fixed Issues

Fixed an issue where abnormal reboot while converting SHR type or expanding SHR capacity may cause the storage volume not to be properly mounted.

Fixed an issue where the completion of Snapshot Replication under high load environment may result in abnormal reboot.

Minor bug fixes.
 

 

 

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP MicroServer Gen8  

- Additional comments: Extra Intel NIC

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP MicroServer Gen8 (Intel Xeon E3)

- Additional comments: Onboard lan not tested, all ok with PCIE Intel NIC

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: New install

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs (MBR version LINK  thanks wimmetje)

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - GA-6UASV3    (Intel Xeon E3-1220V2)

- Additional comments: Extra Intel NIC  (9420PT)  Onboard lan ( BCM5719) not worked, but in ssh the Kernel driver, tg3, was loaded

I have a problem.  restart and shutdown don't work . go back to 3617 6.2 version

Link to comment
Share on other sites

- Outcome of the installation/update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 - Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen 8 with Intel NIC

- Additional comments: no need restart

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  ASRock C2550D4I

- Additional comments: Updated from DSM Control Panel.  Intel X540-T2 continues to work fine.  No restart needed but I did a restart anyway to make sure it's working.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte H110M-S2H / Pentium G4400

- Additional comments: Updated from DSM Control Panel, no reboot necessary

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs 

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP MicroServer Gen10 with AMD Opteron X3216

- Additional comments: HP NC360T Dual NIC, no reboot necessary

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

-  Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP N54L

- Additional comments: Updated from DSM Control Panel, no reboot necessary

Link to comment
Share on other sites

-Outcome of the update: SUCCESSFULL
-DMS version prior update: DSM 6.2.1-23824 update 4
-Loader version and model: Jun's loader V1.03b -DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - N54L

- Additional comments: HP NC360T Dual NIC, USB3: Fujitsu Renesas uPD720202 working, no reboot necessary

 

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  Asrock Q1900-ITX

- Additional comments: reboot needed

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3617XS

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock N3150B-ITX

- Additional comments: Updated from DSM Control Panel & Reboot needed

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615XS

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7

- Additional comments: Updated from DSM Control Panel, no reboot needed.

Edited by mtk8734
Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  SuperMicro X9SCM-F - E3-1270v2 / Mellanox Connectx-3

- Additional comments:  No Reboot Required

Link to comment
Share on other sites

 Outcome of the update:  SUCCESSFUL

- DSM version before update: DSM 6.2.1-23824 Update 4

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: No

- Installation type: BAREMETAL - Dell Optiplex 980

- Additional comments: It just worked, No Reboot Required. Reboot test was also okay.

 

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 4

- Loader version and model: Jun's Loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.5U2 on Microserver Gen8

- Additional comments: Cougar Point 6 port SATA AHCI Controller in passthrough, NIC set to e1000e. No Reboot Required

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: ASRock Z370M-ITXac (built-in WiFi card removed)

- Additional comments: No reboot needed

Link to comment
Share on other sites

- Outcome of the update:  SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 4

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: Intel NUC NUC5i5RYK

- Additional comments: reboot needed, updated Docker DSM as well (completed in under a minute)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...