NiGGaZ Posted March 6, 2020 Share #26 Posted March 6, 2020 В 26.05.2019 в 23:05, jamkiki72 сказал: Been there. Elite 8300 PITA of a system to set up Xpenology. Someone on the forum sugested Hybrid partition usb working. Found it, credit goes to "Mitja"https://xpenology.com/forum/topic/12867-user-reported-compatibility-thread-for-dsm-62/page/2/?tab=comments#comment-107653 Use 1.03b ds3615 (maybe 3617 works, but 3615 is prefered). You MUST create "HYBRID" partition bootable usb for HP Compaq Elite 8300. Using it myself, update from 6.2.1 to 6.2.2 or clean install of latest 6.2.2 working perfect. Allow me to make it easyer for you: ----------------------------------------------------------- PART 1. preparation: -Download: "gdisk-windows-1.0.4.zip" (for windows) or appropriate one for other systems from herehttps://sourceforge.net/projects/gptfdisk/files/gptfdisk/1.0.4/gdisk-binaries/ -unzip content to folder (in the instructions bellow I unziped it in folder named "a" and copied that folder to root of a C disk) -in the BIOS of the HP Compaq Elite 8300 turn OFF UEFI boot by going to boot menu and press (I think) "F5" while UEFI option is highlighted, this will disable PC to default to UEFI boot on restart or powering on after power off. -in option ROM loading menu set all to legacy (storage, gpu, network) -on the working pc create standard clean usb with 1.03b - ds3615xs as usual leave it in the PC when done. -go to computer manager/disk managment (right click "My Computer" or "This PC" select "Manage" then "disk managment") - IMPORTANT - DATA LOSS POSIBLE IF YOU MAKE MISTAKE!!! note your USB key disk number ( Disk 0 is usually system partition). Please be carefull and double check! in the down listed commands the USB Key is "Disk 2" , copy/paste commands to lets say notepad, and CHANGE to match your situation (including for folder "a" in a root off a C disk if you didnt do it that way). ----------------------------------------------------------- PART 2. creating HYBRID partition USB Key- "gdisk-windows-1.0.4.zip" unziped to folder "a" in root of a C disk, USB KEY is "Disk 2" - !!!ALTER THIS TO MATCH YOUR SITUATION!!! first command "cd c:\a" - "a" represents folder named "a" and location in root (C:\) of a C disk - !!!ALTER THIS TO MATCH YOUR SITUATION!!! second command: "gdisk64 2:" - nr.64 represents 64bit system is running on, if you use 32bit system use #gdisk32 2:" -nr.2 represents Disk 2 on the system - !!!ALTER THIS TO MATCH YOUR SITUATION!!! -open command prompt as admin List of commands as per situation above (64bit sys, gdisk in folder "a" root C, USB is "Disk 2") press ENTER after each one of course:-------------------------------------- cd c:\a gdisk64 2: r o h 1 2 3 n "JUST PRESS ENTER - THIS SHOWING UP (DO NOT TYPE ANYTHING): Enter code (MBR partition #1):" y "JUST PRESS ENTER - THIS SHOWING UP (DO NOT TYPE ANYTHING): Enter code (MBR partition #2):" n "JUST PRESS ENTER - THIS SHOWING UP (DO NOT TYPE ANYTHING): Enter code (MBR partition #3):" n w y exit -------------------------------------- Now window will probably pop up asking you to format the drive, DO NOT DO IT!! Safely remove USB and put it in Elite 8300 and You are ready to go. This way created USB is harder to reformat and use again. Best way I found is to use free version of "MiniTool Partition Wizard" , first rebuild MBR whitin the program then delete partitions one by one (apply betwen each operation). I am sure you manage it and find best way if you need to reformat and reuse USB Key. Sorry for my English, not native speaker.... Good Luck!! Really useful! Quote Link to comment Share on other sites More sharing options...
Felix_eme Posted April 30, 2020 Share #27 Posted April 30, 2020 (edited) Failed on this. I've done the hybrid usb but don't work. Doesn't appear on my LAN. Edited April 30, 2020 by Felix_eme Quote Link to comment Share on other sites More sharing options...
Fredis Posted May 31, 2020 Share #28 Posted May 31, 2020 On 5/26/2019 at 8:05 PM, jamkiki72 said: Been there. Elite 8300 PITA of a system to set up Xpenology. Someone on the forum sugested Hybrid partition usb working. Found it, credit goes to "Mitja"https://xpenology.com/forum/topic/12867-user-reported-compatibility-thread-for-dsm-62/page/2/?tab=comments#comment-107653 Use 1.03b ds3615 (maybe 3617 works, but 3615 is prefered). You MUST create "HYBRID" partition bootable usb for HP Compaq Elite 8300. Using it myself, update from 6.2.1 to 6.2.2 or clean install of latest 6.2.2 working perfect. Allow me to make it easyer for you: ----------------------------------------------------------- PART 1. preparation: -Download: "gdisk-windows-1.0.4.zip" (for windows) or appropriate one for other systems from herehttps://sourceforge.net/projects/gptfdisk/files/gptfdisk/1.0.4/gdisk-binaries/ -unzip content to folder (in the instructions bellow I unziped it in folder named "a" and copied that folder to root of a C disk) -in the BIOS of the HP Compaq Elite 8300 turn OFF UEFI boot by going to boot menu and press (I think) "F5" while UEFI option is highlighted, this will disable PC to default to UEFI boot on restart or powering on after power off. -in option ROM loading menu set all to legacy (storage, gpu, network) -on the working pc create standard clean usb with 1.03b - ds3615xs as usual leave it in the PC when done. -go to computer manager/disk managment (right click "My Computer" or "This PC" select "Manage" then "disk managment") - IMPORTANT - DATA LOSS POSIBLE IF YOU MAKE MISTAKE!!! note your USB key disk number ( Disk 0 is usually system partition). Please be carefull and double check! in the down listed commands the USB Key is "Disk 2" , copy/paste commands to lets say notepad, and CHANGE to match your situation (including for folder "a" in a root off a C disk if you didnt do it that way). ----------------------------------------------------------- PART 2. creating HYBRID partition USB Key- "gdisk-windows-1.0.4.zip" unziped to folder "a" in root of a C disk, USB KEY is "Disk 2" - !!!ALTER THIS TO MATCH YOUR SITUATION!!! first command "cd c:\a" - "a" represents folder named "a" and location in root (C:\) of a C disk - !!!ALTER THIS TO MATCH YOUR SITUATION!!! second command: "gdisk64 2:" - nr.64 represents 64bit system is running on, if you use 32bit system use #gdisk32 2:" -nr.2 represents Disk 2 on the system - !!!ALTER THIS TO MATCH YOUR SITUATION!!! -open command prompt as admin List of commands as per situation above (64bit sys, gdisk in folder "a" root C, USB is "Disk 2") press ENTER after each one of course:-------------------------------------- cd c:\a gdisk64 2: r o h 1 2 3 n "JUST PRESS ENTER - THIS SHOWING UP (DO NOT TYPE ANYTHING): Enter code (MBR partition #1):" y "JUST PRESS ENTER - THIS SHOWING UP (DO NOT TYPE ANYTHING): Enter code (MBR partition #2):" n "JUST PRESS ENTER - THIS SHOWING UP (DO NOT TYPE ANYTHING): Enter code (MBR partition #3):" n w y exit -------------------------------------- Now window will probably pop up asking you to format the drive, DO NOT DO IT!! Safely remove USB and put it in Elite 8300 and You are ready to go. This way created USB is harder to reformat and use again. Best way I found is to use free version of "MiniTool Partition Wizard" , first rebuild MBR whitin the program then delete partitions one by one (apply betwen each operation). I am sure you manage it and find best way if you need to reformat and reuse USB Key. Sorry for my English, not native speaker.... Good Luck!! Thank You for good information. I do all steps, the boot loader boot up but in LAN with Synology assistant I cant see the NAS. May be Yo have som solution. Best regards. Quote Link to comment Share on other sites More sharing options...
kingo71 Posted October 30, 2020 Share #29 Posted October 30, 2020 On 5/31/2020 at 9:41 PM, Fredis said: Thank You for good information. I do all steps, the boot loader boot up but in LAN with Synology assistant I cant see the NAS. May be Yo have som solution. Best regards. Same here, managed to boot the 1.02b and DSM 6.1.7 works just fine but with 1.03b the NAS is not found on the network. Did somebody managed to get this work? P.S.: Bios 3.08 and EUFI disabled. Quote Link to comment Share on other sites More sharing options...
chunkynutella Posted November 19, 2020 Share #30 Posted November 19, 2020 I'm embarking on this journey too, an i7 8300's come into my possession and i'm just tried this and failed almost immediately. originally tried a 1.04b flash drive from a working xpenology machine but got some weird graphical issue on boot, looked as if the 2 screens after boot merged into 1 and they were off to the right and slightly down, about a third off the screen. notingly I get a failure on trying to boot the drive on legacy so this was only visible using UEFI after some troubleshooting I ended up resetting the bios using the below CMOS Battery out > press CMOS clear button on motherboard > reinsert CMOS battery now it looks fine graphicly (still only able to boot from UEFI) but I still don't see the machine on the network after boot I also just tried resorting to installing OpenMediaVault temporarily but that flash drive also doesn't boot correctly. Currently weighing up upgrading the bios to the latest (3.08 rev a from the looks of the HP support site) version but am unsure if this will fix my issues. also some people are talking about a hidden USB Legacy boot option in the BIOS so will also give that a go Quote Link to comment Share on other sites More sharing options...
chunkynutella Posted November 23, 2020 Share #31 Posted November 23, 2020 looks like I'm settling for DS3615xs 1.02b and DSM 6.1.7 no other combo's work, did try 6.2.3 upgrade from 6.1.7 with the same loader but that of course didn't work, booted and was on the network but it didn't recognize the installed DSM Since the NIC is intel and the i7 3rd gen in there should be fine with the DS3615xs I'm a bit stuck on what could be going wrong, starting to look at what could be wrong with drivers Quote Link to comment Share on other sites More sharing options...
IG-88 Posted November 23, 2020 Share #32 Posted November 23, 2020 2 hours ago, chunkynutella said: no other combo's work, did try 6.2.3 upgrade from 6.1.7 with the same loader but that of course didn't work, booted and was on the network but it didn't recognize the installed DSM Since the NIC is intel and the i7 3rd gen in there should be fine with the DS3615xs I'm a bit stuck on what could be going wrong, starting to look at what could be wrong with drivers HP Compaq 8300 SFF i7 is 3rd gen intel cpu, no 1.04b 918+ (see 1st link) 1.03b needs csm legacy mode AND booting from legacy usb device and in this case you will only see that usb device when its a mbr version 1.02b will work because you use it as uefi boot (the selected usb boot device makes the decision about the used mode, only when a non uefi device is used then csm mode kicks in) https://xpenology.com/forum/topic/13333-tutorialreference-6x-loaders-and-platforms/ https://xpenology.com/forum/topic/20270-dsm-62-loader-with-mbr-partition-table/ Quote Link to comment Share on other sites More sharing options...
pascaldu62 Posted April 22, 2021 Share #33 Posted April 22, 2021 Vraiment top ! pour (re)formater la clef usb: cmd en mode administrateur diskpart 'entrer' list disk 'entrer' select disk 2(numéro de votre clef) 'entrer' clean 'entrer' vous pouvez réutiliser ensuite win32diskimage merci Quote Link to comment Share on other sites More sharing options...
pascaldu62 Posted April 22, 2021 Share #34 Posted April 22, 2021 Le 26/05/2019 à 19:05, jamkiki72 a dit : Been there. Elite 8300 PITA of a system to set up Xpenology. Someone on the forum sugested Hybrid partition usb working. Found it, credit goes to "Mitja" https://xpenology.com/forum/topic/12867-user-reported-compatibility-thread-for-dsm-62/page/2/?tab=comments#comment-107653 Use 1.03b ds3615 (maybe 3617 works, but 3615 is prefered). You MUST create "HYBRID" partition bootable usb for HP Compaq Elite 8300. Using it myself, update from 6.2.1 to 6.2.2 or clean install of latest 6.2.2 working perfect. Allow me to make it easyer for you: ----------------------------------------------------------- PART 1. preparation: -Download: "gdisk-windows-1.0.4.zip" (for windows) or appropriate one for other systems from here https://sourceforge.net/projects/gptfdisk/files/gptfdisk/1.0.4/gdisk-binaries/ -unzip content to folder (in the instructions bellow I unziped it in folder named "a" and copied that folder to root of a C disk) -in the BIOS of the HP Compaq Elite 8300 turn OFF UEFI boot by going to boot menu and press (I think) "F5" while UEFI option is highlighted, this will disable PC to default to UEFI boot on restart or powering on after power off. -in option ROM loading menu set all to legacy (storage, gpu, network) -on the working pc create standard clean usb with 1.03b - ds3615xs as usual leave it in the PC when done. -go to computer manager/disk managment (right click "My Computer" or "This PC" select "Manage" then "disk managment") - IMPORTANT - DATA LOSS POSIBLE IF YOU MAKE MISTAKE!!! note your USB key disk number ( Disk 0 is usually system partition). Please be carefull and double check! in the down listed commands the USB Key is "Disk 2" , copy/paste commands to lets say notepad, and CHANGE to match your situation (including for folder "a" in a root off a C disk if you didnt do it that way). ----------------------------------------------------------- PART 2. creating HYBRID partition USB Key- "gdisk-windows-1.0.4.zip" unziped to folder "a" in root of a C disk, USB KEY is "Disk 2" - !!!ALTER THIS TO MATCH YOUR SITUATION!!! first command "cd c:\a" - "a" represents folder named "a" and location in root (C:\) of a C disk - !!!ALTER THIS TO MATCH YOUR SITUATION!!! second command: "gdisk64 2:" - nr.64 represents 64bit system is running on, if you use 32bit system use #gdisk32 2:" -nr.2 represents Disk 2 on the system - !!!ALTER THIS TO MATCH YOUR SITUATION!!! -open command prompt as admin List of commands as per situation above (64bit sys, gdisk in folder "a" root C, USB is "Disk 2") press ENTER after each one of course:-------------------------------------- cd c:\a gdisk64 2: r o h 1 2 3 n "JUST PRESS ENTER - THIS SHOWING UP (DO NOT TYPE ANYTHING): Enter code (MBR partition #1):" y "JUST PRESS ENTER - THIS SHOWING UP (DO NOT TYPE ANYTHING): Enter code (MBR partition #2):" n "JUST PRESS ENTER - THIS SHOWING UP (DO NOT TYPE ANYTHING): Enter code (MBR partition #3):" n w y exit -------------------------------------- Now window will probably pop up asking you to format the drive, DO NOT DO IT!! Safely remove USB and put it in Elite 8300 and You are ready to go. This way created USB is harder to reformat and use again. Best way I found is to use free version of "MiniTool Partition Wizard" , first rebuild MBR whitin the program then delete partitions one by one (apply betwen each operation). I am sure you manage it and find best way if you need to reformat and reuse USB Key. Sorry for my English, not native speaker.... Good Luck!! Vraiment top ! pour (re)formater la clef usb: cmd en mode administrateur diskpart 'entrer' list disk 'entrer' select disk 2(numéro de votre clef) 'entrer' clean 'entrer' vous pouvez réutiliser ensuite win32diskimage merci Quote Link to comment Share on other sites More sharing options...
droiduser2 Posted July 2, 2021 Share #35 Posted July 2, 2021 I have a thread here with info that is easier. I have a HP8200SFF I suggest you change your CMOS battery and update the Bios to 2.3x Check your bios each time if needed and turn OFF uefi and turn on Legacy and set legacy to boot from USB first. You MUST ensure your BIOS is setup properly or it won't work. When you boot from USB, if you don't go to Juns loader then your BIOS is not setup. If Bios is set up then it means your USB key is not setup right (Hybrib MBR). Please see my thread which makes it MUCH easier to do. Quote Link to comment Share on other sites More sharing options...
Kamele0N Posted July 2, 2021 Share #36 Posted July 2, 2021 (edited) On 2/4/2019 at 2:41 PM, djsoundround said: .... Edited July 2, 2021 by Kamele0N Was answering on a debate on a, 1st page....which was resolved later on.... Quote Link to comment Share on other sites More sharing options...
NasNoobie Posted March 30, 2022 Share #37 Posted March 30, 2022 Just adding to the knowledge base. I have a Lenovo M72e Tiny (i5-3470, 2gb ddr3 ram, onboard networking) that I was having trouble where it would boot up to the "happy hacking" screen but the network card wouldn't pick up an IP address and I couldn't find the NAS on my network. After downgrading to Jun's 1.02b; it picks up the device properly. Limited to 6.1.7 for the Firmware I believe but that should be fine. I read in one of the other threads it might be possible ot go to 1.03b using bios => legacy only in the m72e but I'm not sure if that applies to the usff / tiny version that I'm using. Either way, the device only supports 1 SATA 2.5" drive so I've got a 2tb notebook drive in there for now and it's verifying the hard disk as we speak. IF any other users have anything else to recommend/add to this; please let me know Quote Link to comment Share on other sites More sharing options...
Ingridis13 Posted June 18, 2022 Share #38 Posted June 18, 2022 Hei, guys! Those who use HP elite 8300 platform: YOU NEED TO DISABLE AMT at BIOS!! This is root of evil! No need to shaman's dance with a tambourine! 1 Quote Link to comment Share on other sites More sharing options...
Aqua2222 Posted March 4, 2023 Share #39 Posted March 4, 2023 (edited) YEEEEAAAAAHHH!!! Million thanks! IT WORKS! It needs just to push CTRL-P before boot process and shutdown this f*cking Intel ME! Edited March 4, 2023 by Aqua2222 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.