Sata & LSI

[siri_uk]

Hi guys

 

I'm swapping from a gen 8 microserver to a system with asrock j4105m and dell h310 crossflashed to lsi 9211-8i. If I run 8 drives am i better running the 8 drives directly from the lsi or 6 from the lsi and 2 from the on board 6gps sata ports. Do I also have to configure the sata ports in the bootloader.

 

Thanks

[Dfds]

I think you'd be better off disabling the internal sata controller & just using the LSI.

[kaktuss77]

I have actually 4 drives on SATA and 8 drives on my 9211-8i card, drive on 6th sata port report speed link changing with CRC error (isn't the drive - swap 2 drive, same thing same port) , I have bought a LSI00244 9201-16i to fit my 12 drives on it