burg3r

3615 booting, 3617 not.... why?

Recommended Posts

Hey guy's, sorry for my bad english im trying my best.

 

i try to install DSM 6.2 on my Acer Altos F3. I'm using Jun's loader 1.03b. This Server has an 4 Core Xeon (1220 v3)  and that's why i have to use the 3617. But i can't boot with the 3617xs version of this loader. Every older version work's. And you see the perfomance difference between 3615 and 3617 image.

 

I have an serial cable for the Hardware Console. That's the Bootsequence from the 6.2 that hangs:


                   GNU GRUB  version 2.02~beta2-36ubuntu3.14

 +----------------------------------------------------------------------------+
 |*DS3617xs 6.2 Baremetal with Jun's Mod v1.03b                               |
 | DS3617xs 6.2 Baremetal with Jun's Mod v1.03b Reinstall                     |
 | DS3617xs 6.2 VMWare/ESXI with Jun's Mod v1.03b                             |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 +----------------------------------------------------------------------------+

      Use the ^ and v keys to select which entry is highlighted.
      Press enter to boot the selected OS, `e' to edit the commands
      before booting or `c' for a command-line.
   The highlighted entry will be executed automatically in 0s.
▒▒[    0.889011] ata2: send port disabled event
[    0.889020] ata3: send port disabled event
patching file etc/rc
patching file etc/synoinfo.conf
Hunk #1 FAILED at 261.
1 out of 1 hunk FAILED -- saving rejects to file etc/synoinfo.conf.rej
patching file linuxrc.syno
Hunk #3 succeeded at 552 (offset 1 line).
patching file usr/sbin/init.post
cat: can't open '/etc/synoinfo_override.conf': No such file or directory
START /linuxrc.syno
Insert Marvell 1475 SATA controller driver
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ehci-hcd ... [  OK  ]
:: Load[    1.311020] kernel tried to execute NX-protected page - exploit attemp                                     t? (uid: 0)
[    1.319849] BUG: unable to handle kernel paging request at ffff88040acff8e0
[    1.327293] IP: [<ffff88040acff8e0>] 0xffff88040acff8df
[    1.332890] PGD 1ac2067 PUD 1ac5067 PMD 800000040ac000e3
[    1.338765] Oops: 0011 [#1] SMP
[    1.342179] Modules linked in: ehci_pci(F+) ehci_hcd(F) usbcore usb_common mv                                     14xx(O) pndcj(OF)
[    1.351510] CPU: 1 PID: 3553 Comm: insmod Tainted: GF          O 3.10.105 #23                                     824
[    1.359297] Hardware name: Acer Altos T310 F3/Altos T310 F3, BIOS P07 06/06/2                                     016
[    1.367146] task: ffff88040ad78040 ti: ffff880407060000 task.ti: ffff88040706                                     0000
[    1.375135] RIP: 0010:[<ffff88040acff8e0>]  [<ffff88040acff8e0>] 0xffff88040a                                     cff8df
[    1.383202] RSP: 0018:ffff880407063b78  EFLAGS: 00010046
[    1.388842] RAX: ffff88040af14410 RBX: 0000000000000006 RCX: 0000000000000002
[    1.396466] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff88040a821000
[    1.403998] RBP: ffff88040a821000 R08: ffff880407063b84 R09: 000000000000fffb
[    1.411611] R10: 0000000000000000 R11: 000000000000029a R12: 0000000000000000
[    1.419158] R13: ffff880407063bbe R14: 0000000000000246 R15: ffffffffa00ebb40
[    1.426770] FS:  00007fa556749700(0000) GS:ffff88041fc80000(0000) knlGS:00000                                     00000000000
[    1.435372] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.441464] CR2: ffff88040acff8e0 CR3: 000000040ad9a000 CR4: 00000000001607e0
[    1.449114] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    1.456641] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    1.464143] Stack:
[    1.466313]  ffffffff81292f25 0000000007063bd8 0000000000000010 0000000000000                                     00a
[    1.474310]  ffff88040a8247f8 0000000000000000 ffff88040a824890 ffffffff81298                                     046
[    1.482305]  0000000000000001 ffff88040a8247f8 ffffffff8129808b ffff880406eef                                     000
[    1.490294] Call Trace:
[    1.492951]  [<ffffffff81292f25>] ? pci_bus_read_config_word+0x65/0x90
ing module ehci-[    1.499923]  [<ffffffff81298046>] ? __pci_bus_find_cap_start+                                     0x16/0x40
[    1.508155]  [<ffffffff8129808b>] ? pci_find_capability+0x1b/0x50
[    1.514532]  [<ffffffffa00eb09d>] ? ehci_pci_setup+0x9d/0x5a0 [ehci_pci]
[    1.521585]  [<ffffffffa00aac4d>] ? usb_add_hcd+0x1bd/0x660 [usbcore]
pci[    1.528292]  [<ffffffffa00b99d3>] ? usb_hcd_pci_probe+0x363/0x410 [usbcore                                     ]
[    1.535881]  [<ffffffff8129bd80>] ? pci_device_probe+0x60/0xa0
[    1.542076]  [<ffffffff8130575a>] ? really_probe+0x5a/0x220
[    1.547983]  [<ffffffff813059e1>] ? __driver_attach+0x81/0x90
[    1.554083]  [<ffffffff81305960>] ? __device_attach+0x40/0x40
[    1.560227]  [<ffffffff81303a53>] ? bus_for_each_dev+0x53/0x90
[    1.566440]  [<ffffffff81304ef8>] ? bus_add_driver+0x158/0x250
[    1.572623]  [<ffffffffa00ed000>] ? 0xffffffffa00ecfff
[    1.578038]  [<ffffffff81305fe8>] ? driver_register+0x68/0x150
[    1.584253]  [<ffffffffa00ed000>] ? 0xffffffffa00ecfff
[    1.589748]  [<ffffffff810003aa>] ? do_one_initcall+0xea/0x140
[    1.594944] tsc: Refined TSC clocksource calibration: 3092.830 MHz
[    1.594946] Switching to clocksource tsc
[    1.606833]  [<ffffffff8108baf4>] ? load_module+0x1a04/0x2120
[    1.612933]  [<ffffffff81088cb0>] ? store_uevent+0x40/0x40
[    1.618891]  [<ffffffff8108c2a1>] ? SYSC_init_module+0x91/0xc0
[    1.625167]  [<ffffffff814c0dc4>] ? system_call_fastpath+0x22/0x27
[    1.631751] Code: 88 ff ff 00 44 f1 0a 04 88 ff ff 70 63 69 30 30 30 30 3a 30                                      30 00 2e 0a 00 00 00 00 00 00 00 6c 69 73 74 5f 61 64 64 20 63 6f 72 <70> 63 69                                      30 30 30 30 3a 30 30 00 65 76 2d 3e 6e 65 78 74 20 73
[    1.653504] RIP  [<ffff88040acff8e0>] 0xffff88040acff8df
[    1.659191]  RSP <ffff880407063b78>
[    1.662908] CR2: ffff88040acff8e0
[    1.666522] ---[ end trace 024e32a45bb1cc55 ]---

 

Here a normal Bootsequence from the 1.02 Loader with the same Settings:

 

                    GNU GRUB  version 2.02~beta2-36ubuntu3.9

 +----------------------------------------------------------------------------+
 | DS3617xs 6.1 Baremetal with Jun's Mod v1.02-alpha                          |
 |*DS3617xs 6.1 Baremetal with Jun's Mod v1.02-alpha Reinstall                |
 | DS3617xs 6.1 VMWare/ESXI with Jun's Mod v1.02-alpha                        |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 |                                                                            |
 +----------------------------------------------------------------------------+

      Use the ^ and v keys to select which entry is highlighted.
      Press enter to boot the selected OS, `e' to edit the commands
      before booting or `c' for a command-line.
▒[    1.834450] ata2: send port disabled event
[    1.834458] ata3: send port disabled event
patching file etc/passwd
patching file etc/rc
patching file etc/synoinfo.conf
patching file linuxrc.syno
patching file usr/sbin/init.post
START /linuxrc.syno
Insert Marvell 1475 SATA controller driver
Insert basic USB modules...
:: Loading module usb-common ... [  OK  ]
:: Loading module usbcore ... [  OK  ]
:: Loading module ohci-hcd ... [  OK  ]
:: Loading module uhci-hcd ... [  OK  ]
:: Loading module xhci-hcd ... [  OK  ]
:: Loading module etxhci-hcd ... [  OK  ]
:: Loading module usb-storage ... [  OK  ]
:: Loading module BusLogic ... [  OK  ]
:: Loading module vmw_pvscsi ... [  OK  ]
:: Loading module megaraid_mm ... [  OK  ]
:: Loading module megaraid_mbox ... [  OK  ]
:: Loading module megaraid ... [  OK  ]
:: Loading module scsi_transport_spi ... [  OK  ]
:: Loading module mptbase ... [  OK  ]
:: Loading module mptscsih ... [  OK  ]
:: Loading module mptspi ... [  OK  ]
:: Loading module mptsas ... [  OK  ]
:: Loading module mptctl ... [  OK  ]
:: Loading module ata_piix ... [  OK  ]
:: Loading module megaraid_sas ... [  OK  ]
:: Loading module mpt2sas ... [  OK  ]
:: Loading module mpt3sas ... [  OK  ]
Insert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
Partition Version=0
Partition layout is not DiskStation style.
NOT EXECUTE /sbin/e2fsck.
Mounting /dev/md0 /tmpRoot
mount: lseek failed, msg:Invalid argument
mount: mounting /dev/md0 on /tmpRoot failed: No such device
mount /dev/md0 fail, returns
Exit on error [3] no init exists...
Thr Jan 10 06:34:08 UTC 2019
none /sys/kernel/debug debugfs rw,relatime 0 0
sys /sys sysfs rw,relatime 0 0
none /dev devtmpfs rw,relatime,size=8190160k,nr_inodes=2047540,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno failed on 3
starting pid 3981, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [  OK  ]
:: Mounting tmpfs ... [  OK  ]
:: Mounting devtmpfs ... [  OK  ]
:: Mounting devpts ... [  OK  ]
:: Mounting sysfs ... [  OK  ]
mdadm: error opening /dev/md1: No such file or directory
rc: Use all internal disk as swap.
swapon: can't stat '/dev/md1': No such file or directory
:: Loading module sg ... [  OK  ]
:: Loading module mdio ... [  OK  ]
:: Loading module fat ... [  OK  ]
:: Loading module vfat ... [  OK  ]
:: Loading module dca ... [  OK  ]
:: Loading module e1000e ... [  OK  ]
:: Loading module i2c-algo-bit ... [  OK  ]
:: Loading module igb ... [  OK  ]
:: Loading module ixgbe ... [  OK  ]
:: Loading module libcrc32c ... [  OK  ]
:: Loading module mii ... [  OK  ]
:: Loading module libphy ... [  OK  ]
:: Loading module atl1 ... [  OK  ]
:: Loading module atl1e ... [  OK  ]
:: Loading module atl1c ... [  OK  ]
:: Loading module alx ... [  OK  ]
:: Loading module uio ... [  OK  ]
:: Loading module ipg ... [  OK  ]
:: Loading module jme ... [  OK  ]
:: Loading module skge ... [  OK  ]
:: Loading module sky2 ... [  OK  ]
:: Loading module ptp_pch ... [  OK  ]
:: Loading module pch_gbe ... [  OK  ]
:: Loading module qla3xxx ... [  OK  ]
:: Loading module qlcnic ... [  OK  ]
:: Loading module qlge ... [  OK  ]
:: Loading module netxen_nic ... [  OK  ]
:: Loading module sfc ... [  OK  ]
:: Loading module e1000 ... [  OK  ]
:: Loading module pcnet32 ... [  OK  ]
:: Loading module vmxnet3 ... [  OK  ]
:: Loading module bnx2 ... [  OK  ]
:: Loading module bnx2x ... [  OK  ]
:: Loading module cnic ... [FAILED]
:: Loading module r8169 ... [  OK  ]
:: Loading module tg3 ... [  OK  ]
:: Loading module usbnet ... [  OK  ]
:: Loading module ax88179_178a ... [  OK  ]
:: Loading module button ... [  OK  ]
mount: open failed, msg:No such file or directory
mount: mounting /dev/bus/usb on /proc/bus/usb failed: No such device
ln: /proc/bus/usb/devices: No such file or directory
:: Loading module synobios ... [  OK  ]
udhcpc (v1.16.1) started
udhcpc (v1.16.1) started
eth0      Link encap:Ethernet  HWaddr 00:11:32:2C:A6:03
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth1      Link encap:Ethernet  HWaddr 94:DE:80:EE:6C:40
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

:: Starting syslogd ... [  OK  ]
:: Starting scemd
:: Starting services in background
Starting findhostd in flash_rd...
Starting services in flash_rd...
Running /usr/syno/etc/rc.d/J01httpd.sh...
Starting httpd:80 in flash_rd...
Starting httpd:5000 in flash_rd...
Running /usr/syno/etc/rc.d/J03ssdpd.sh...
/usr/bin/minissdpd -i eth0 -i eth1
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-0011322ca603::upnp:rootdevice
(60): Synology/synology_broadwell_3617xs/6.1-15047/169.254.145.210
(48): http://169.254.145.210:5000/description-eth0.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 169.254.145.210 0011322ca603 6.1-15047 synology_broadwell_3617xs eth0
(15): upnp:rootdevice
(51): uuid:upnp_SynologyNAS-94de80ee6c40::upnp:rootdevice
(59): Synology/synology_broadwell_3617xs/6.1-15047/169.254.47.188
(47): http://169.254.47.188:5000/description-eth1.xml
Connected.
done.
/usr/syno/bin/reg_ssdp_service 169.254.47.188 94de80ee6c40 6.1-15047 synology_broadwell_3617xs eth1
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/eThu Jan 10 06:34:17 2019

DiskStation login:

I hope that one of u guy's can PLEASE help me..... PLEASE

Share this post


Link to post
Share on other sites

You can use 3615 image with no negative effects with your CPU.  3617 seems to have some problems in unpredictable situations.

Share this post


Link to post
Share on other sites

But I only See 2 cores in the settings. I cant use the other 2, for virtual machines or something

Share this post


Link to post
Share on other sites

If by settings, you mean Control Panel, that is a static report and is cosmetic only.

DSM will use up to 8 non-hyperthreaded cores or 4 hyperthreaded cores on all versions supported by XPEnology.

 

See cat /proc/cpuinfo for what is actually running. The "processor" field is the number of threads starting with 0 (it will report 7 for 8 threads).

Alternative command: nproc --all

 

Edited by flyride

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now