Jump to content
XPEnology Community

Need help on a bluetooth dongle connection issue


blackwinds

Recommended Posts

I setup a Dell T20 with DS3615xs of Jun's loader. I did check the hardware compatibility list. Then I bought a Kinivo BTD-400 Bluetooth dongle because it is in the list. 

When I connect it, it doesn't work. The blue light is up. I did check dmesg and /var/log/messages. I found the firmware is missing. It seems to me the DS3615XS doesn't support it at all. Never mind, I download the firmware and put it in /lib/firmware/brcm folder. Then I found there is maybe a bug for this BT support because when I direct plug the dongle in, the DSM expects BCM20702A0-0a5c-21e8.hcd. But when I reboot, it asks for "BCM920702 Bluetooth 4.0-0a5c-21e8.hcd". It is so upset. Do they really have QE?

 

Anyway, I put both name in that folder. Then check the log again, it seems like the firmware is loaded successfully. However, the kernel suddently killed it.

 

2018-12-30T03:06:34-08:00 DiskStation [ 1916.840592] init: bluetoothd main process (26477) killed by KILL signal

2018-12-30T03:07:30-08:00 DiskStation bluetoothd[8747]: Failed to open RFKILL control device

2018-12-30T03:07:31-08:00 DiskStation bluetoothd[8747]: Unknown command complete for opcode 19

 

There are no further information provided. I don't know what can I do now. Can anybody give some clue? I did check the bluetoothd service, it is disabled. I enabled it manually but it still the same. It doesn't work. There is nothing showing up from control panel -> wireless -> bluetooth. 

 

I checked hdiconfig -a, it looks good.

 

 

thanks

Link to comment
Share on other sites

admin@DiskStation:~$ dmesg | grep -i blue

[   16.954370] Bluetooth: Core ver 2.19

[   16.954385] Bluetooth: HCI device and connection manager initialized

[   16.954392] Bluetooth: HCI socket layer initialized

[   16.954393] Bluetooth: L2CAP socket layer initialized

[   16.954397] Bluetooth: SCO socket layer initialized

[   16.956755] Bluetooth: RFCOMM socket layer initialized

[   16.956760] Bluetooth: RFCOMM ver 1.11

[   16.957633] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[   16.957637] Bluetooth: HIDP socket layer initialized

[   16.977731] Bluetooth: hci0: BCM: patching hci_ver=06 hci_rev=153a lmp_ver=06 lmp_subver=220e

[   17.582244] Bluetooth: hci0: BCM: firmware hci_ver=06 hci_rev=153a lmp_ver=06 lmp_subver=220e

Link to comment
Share on other sites

admin@DiskStation:~$ hciconfig -a

hci0: Type: BR/EDR  Bus: USB

BD Address: 5C:F3:70:92:D5:8F  ACL MTU: 1021:8  SCO MTU: 64:1

UP RUNNING PSCAN 

RX bytes:37487 acl:0 sco:0 events:612 errors:0

TX bytes:36935 acl:0 sco:0 commands:609 errors:0

Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87

Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 

Link policy: RSWITCH SNIFF 

Link mode: SLAVE ACCEPT 

Name: 'DiskStation-0'

Class: 0x6c0100

Service Classes: Rendering, Capturing, Audio, Telephony

Device Class: Computer, Uncategorized

HCI Version: 4.0 (0x6)  Revision: 0x153a

LMP Version: 4.0 (0x6)  Subversion: 0x220e

Manufacturer: Broadcom Corporation (15)

Link to comment
Share on other sites

sudo cat /var/log/messages | grep -i blue

 

...

2018-12-31T02:40:37-08:00 DiskStation [84869.599934] init: bluetoothd main process (23812) killed by KILL signal

2018-12-31T02:41:38-08:00 DiskStation bluetoothd[8765]: Failed to open RFKILL control device

2018-12-31T02:41:39-08:00 DiskStation bluetoothd[8765]: Unknown command complete for opcode 19

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...