Ronnie_frown Posted December 29, 2018 Share #1 Posted December 29, 2018 Hello all, i have an old HP DX2400, Intel E7600, 6 GB RAM running LDS3615xs, loader v1.02b, DSM 6.1.4-15217 Update 1. everything is running well except a weird transfer speed issue, I’m running all devices through a Gigabit switch, I’m getting around 60-70 MB/s upload speed to my box which is good enough but on the other hand I’m getting 1-2 MB/s download rate! Switching to my AC WiFi adapter on PC I get 350k! Tried the test with different PC/Laptops and different files with different sizes, reloaded the installation from scratch with a different HDD but no luck. Btw I’m only using a single HDD in this box since I’m still testing for functionality and stability at the moment. My aging DS212j runs at around 30-40 MB/s up and down as it always has so I’m kinda sure it’s not the network or the PCs connected to the box. wondering what could this be, appreciate all the assistance I can get. Quote Link to comment Share on other sites More sharing options...
Ronnie_frown Posted December 31, 2018 Author Share #2 Posted December 31, 2018 a combination of Jun's Loader v1.03b DS3615xs and DSM 6.2-23739 did the trick, full gigabit speeds up and down. not sure what that was but i'm suspecting it was a drivers thing. Quote Link to comment Share on other sites More sharing options...
Ronnie_frown Posted January 5, 2019 Author Share #3 Posted January 5, 2019 (edited) Feels like i'm talking to myself here but i hope someone would take the time to give some feedback. Apparently the above combination was working but i decided to reload the system with new drives and the same config, same problem reoccured, full Gigabit speeds up but with 2 mb down speeds ! i tried all possible configs so far, with and without extra.lzma. 1- ethtool eth0 output: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) drv probe ifdown ifup 2- dmesg |grep eth0 output: [ 28.057505] eth0: 0xffffc9001170c000, 00:22:64:c0:e5:21, IRQ 18 [ 28.085655] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.338180] init: dhcp-client (eth0) main process (8745) killed by TERM signal [ 31.091525] r8168: eth0: link up [ 31.091544] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.218219] init: dhcp-client (eth0) main process (9060) killed by TERM signal 3- lspci -k | grep 'Kernel driver' output: Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: ehci-pci Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: uhci_hcd Kernel driver in use: ehci-pci Kernel driver in use: lpc_ich Kernel driver in use: ahci Kernel driver in use: r8168 The main box spec sheet says that i'm supposed to have an "Integrated Realtek 8111C-GR GbE Ethernet Controller; Intel PRO/1000 PT Gigabit PCIe Controller" not an r8168 Please assist !!!!! Edited February 18, 2019 by Polanskiman Added proper code tags. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.