SurveillanceStation-x86_64-8.2.2-5766

iceman · January 27, 2022

Раз у синологи так устроено что по апи получает активацию то можно отловить запрос который прилетает при активации и узнать что и куда она ждет, активация будет решена для любой версии SS

Olegin · January 27, 2022

29 минут назад, iceman сказал:

Раз у синологи так устроено что по апи получает активацию то можно отловить запрос который прилетает при активации и узнать что и куда она ждет, активация будет решена для любой версии SS

Как сделаете расскажите потом.

montagnic · January 27, 2022

50 минут назад, iceman сказал:

Раз у синологи так устроено что по апи получает активацию то можно отловить запрос который прилетает при активации и узнать что и куда она ждет, активация будет решена для любой версии SS

Этот этап уже пройден! Не работает

Alonia · January 27, 2022

3 hours ago, Beman said:

@Alonia, did you try this on the very new version? 9.0 (It is still beta)

I working on version 8.2.10-7310.

All cameras run for 1 hour. Then a routine starts which probably checks the state and deactivates the cameras.

So far I have also only edited the libssutils.so

@Vir-US had edited some more files. The only problem is that what he has edited can not be found again.
I will soon upload the file with the log files

Update:

Log output

Jan 27 22:35:43 start-stop-status: start
Jan 27 22:35:43 S82surveillance.sh: Start Surveillance [8.2.10-7310] begin.
Jan 27 22:35:44 [8528][db][notice] ssdb.cpp:1782:Backup(): Backup db[system.db] successfully.
Jan 27 22:35:44 [8528][rec-share][notice] recordingshareutils.cpp:789:UpdateSSServiceLink(): Set SS service link to [/volume1/surveillance].
Jan 27 22:35:44 [8530][daemon][notice] daemonbase.cpp:264:Init(): Start ssapid
Jan 27 22:35:44 [8532] sscored.cpp:297:main(): Start sscored.
Jan 27 22:35:44 [8561][cms][notice] ssfindhostd.cpp:287:main(): Start ssfindhostd.
Jan 27 22:35:44 [8528][8563][ss-service][notice] services.cpp:1031:StartSSCamerad(): Try to start cam[1].
Jan 27 22:35:44 [8568][daemon][notice] daemonbase.cpp:264:Init(): Start ssrotated
Jan 27 22:35:44 [8528][8564][ss-service][notice] services.cpp:1031:StartSSCamerad(): Try to start cam[2].
Jan 27 22:35:44 [8528][8565][ss-service][notice] services.cpp:1031:StartSSCamerad(): Try to start cam[3].
Jan 27 22:35:44 [8568][8571][ss-service][error] ssthreadtimer.cpp:83:SendKeepAlive(): Failed to send keep alive to daemon monitor. IsSSD[0], CamId[32629], Daemon[2]
Jan 27 22:35:44 [8577][daemon][notice] daemonbase.cpp:264:Init(): Start ssnotifyd
Jan 27 22:35:44 [8578][daemon][notice] daemonbase.cpp:264:Init(): Start sslogd
Jan 27 22:35:44 [8579][daemon][notice] daemonbase.cpp:264:Init(): Start ssmobiled
Jan 27 22:35:44 [8580][daemon][notice] daemonbase.cpp:264:Init(): Start ssfailoverd
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8556][rtsp][notice] ssrtspserverd.cpp:254:main(): Start ssrtspserverd.
Jan 27 22:35:44 [8609][daemon][notice] daemonbase.cpp:264:Init(): Start sswebstreamd
Jan 27 22:35:44 [8611][daemon][notice] daemonbase.cpp:264:Init(): Start sstimelapsed
Jan 27 22:35:44 [8608][daemon][notice] daemonbase.cpp:264:Init(): Start ssarchivingd
Jan 27 22:35:44 [8549][rtsp][notice] ssrtpdataproviderd.cpp:1766:main(): Start ssrtpdataproviderd.
Jan 27 22:35:44 [8612][daemon][notice] daemonbase.cpp:264:Init(): Start ssroutined
Jan 27 22:35:44 [8655][daemon][notice] daemonbase.cpp:264:Init(): Start sscamerad2
Jan 27 22:35:44 [8653][daemon][notice] daemonbase.cpp:264:Init(): Start sscamerad1
Jan 27 22:35:44 [8656][daemon][notice] daemonbase.cpp:264:Init(): Start ssactruled
Jan 27 22:35:44 [8568][8576][messaged][error] ssmessageutils.cpp:49:SendUpdateMsgToMsgD(): Failed to send cmd [7] to ssmessaged.
Jan 27 22:35:44 [8660][daemon][notice] daemonbase.cpp:264:Init(): Start sscamerad3
Jan 27 22:35:44 [8662][daemon][notice] daemonbase.cpp:264:Init(): Start ssmessaged
Jan 27 22:35:44 [8662][messaged][notice] ssmessaged.cpp:1130:Init(): Start websocket server.
Jan 27 22:35:44 [8667][daemon][notice] daemonbase.cpp:264:Init(): Start ssdaemonmonitord
Jan 27 22:35:44 S82surveillance.sh: Start Surveillance [8.2.10-7310] end.
Jan 27 22:35:45 [8654][bkg-upgrader][notice] ssbkgupgraderd.cpp:207:main(): Start ssbkgupgraderd.
Jan 27 22:35:45 [8568][8576][rotated][notice] ssrotated.cpp:764:RotateRecLogFile(): Rotate rec-log file.
Jan 27 22:35:46 [8577][8595] sspushserviceutils.cpp:815:FetchMobileDeviceList(): Failed to get mobile list from sns servers.
Jan 27 22:35:46 [8577][8595][notify-push][error] sspushserviceutils.cpp:1009:GetPushV1MobileConnected(): Fail fetch device list of push service
Jan 27 22:35:47 [8655][cam][notice] camerainstance.cpp:3695:Setup(): Cam[2]: Failed to update media path.
Jan 27 22:35:47 [8660][cam][notice] camerainstance.cpp:3695:Setup(): Cam[3]: Failed to update media path.
Jan 27 22:35:49 [8653][cam][notice] camerainstance.cpp:3695:Setup(): Cam[1]: Failed to update media path.
Jan 27 23:35:49 [8667][daemon][notice] daemonbase.cpp:364:MainLoop(): Stop ssdaemonmonitord.
Jan 27 23:35:49 [8660][cam][notice] sscamerad.cpp:236:Finalize(): Start finalize of cam [3]
Jan 27 23:35:49 [8655][cam][notice] sscamerad.cpp:236:Finalize(): Start finalize of cam [2]
Jan 27 23:35:49 [8653][cam][notice] sscamerad.cpp:236:Finalize(): Start finalize of cam [1]
Jan 27 23:35:49 [8655][cam][notice] sscamerad.cpp:253:Finalize(): Finalize complete of cam [2]
Jan 27 23:35:49 [8655][daemon][notice] daemonbase.cpp:364:MainLoop(): Stop sscamerad2.
Jan 27 23:35:49 [8660][cam][notice] sscamerad.cpp:253:Finalize(): Finalize complete of cam [3]
Jan 27 23:35:49 [8660][daemon][notice] daemonbase.cpp:364:MainLoop(): Stop sscamerad3.
Jan 27 23:35:50 [8653][cam][notice] sscamerad.cpp:253:Finalize(): Finalize complete of cam [1]
Jan 27 23:35:50 [8653][daemon][notice] daemonbase.cpp:364:MainLoop(): Stop sscamerad1.
Jan 27 23:36:44 [8568][8571][ss-service][error] ssthreadtimer.cpp:83:SendKeepAlive(): Failed to send keep alive to daemon monitor. IsSSD[0], CamId[32629], Daemon[2]
Jan 27 23:37:44 [8568][8571][ss-service][error] ssthreadtimer.cpp:83:SendKeepAlive(): Failed to send keep alive to daemon monitor. IsSSD[0], CamId[32629], Daemon[2]
Jan 27 23:38:44 [8568][8571][ss-service][error] ssthreadtimer.cpp:83:SendKeepAlive(): Failed to send keep alive to daemon monitor. IsSSD[0], CamId[32629], Daemon[2]

Edited January 27, 2022 by Alonia

Beman · January 28, 2022

@Alonia Nice work by the way! I have some experience with reverse engineering and could provide some help. Could you identify which website is SS trying to connect for the activation?

Alonia · January 28, 2022

3 hours ago, Beman said:

@Alonia Nice work by the way! I have some experience with reverse engineering and could provide some help. Could you identify which website is SS trying to connect for the activation?

The problem is that other Libarys check this information (offline).
That is why @Vir-US has made some more modifications.

When you change something inside the libssutils.so you brick other routines and then SS will stop the daemonmonitord

What @Vir-US did:

libssutils.so:

change to bytes to set 2 standard licences to 40 standard licences

libssshm.so:

GetCamCnt() -> patched to( return 0; ) // hex -> B8 00 00 00 00 C3 90 90 … 90 (0x90 is a NOP and it do nothing. It is a space filler)
GetIPSpeakerCnt() -> patched to( return 0; )

GetIOModuleCnt() -> patched to( return 0; )

GetSlaveDSCnt() -> patched to( return 0; )

sscamerad:

…

ssdaemonmonitord:

…

ssmessaged:

…

ssroutined:

…

SYNO.SurveillanceStation.Layout.so:

…

SYNO.SurveillanceStation.Player.so:

…

When I edit the value you can see from the log what is changing.

At beginning:

Jan 27 22:35:44 [8568][8576][messaged][error] ssmessageutils.cpp:49:SendUpdateMsgToMsgD(): Failed to send cmd [7] to ssmessaged.

One hour later:

Jan 27 23:35:49 [8667][daemon][notice] daemonbase.cpp:364:MainLoop(): Stop ssdaemonmonitord.

because the MainLoop() does not get the keep alive state

Start SS with patched libssutils.so and 3 cams:

Jan 27 22:35:43 start-stop-status: start
Jan 27 22:35:43 S82surveillance.sh: Start Surveillance [8.2.10-7310] begin.
Jan 27 22:35:44 [8528][db][notice] ssdb.cpp:1782:Backup(): Backup db[system.db] successfully.
Jan 27 22:35:44 [8528][rec-share][notice] recordingshareutils.cpp:789:UpdateSSServiceLink(): Set SS service link to [/volume1/surveillance].
Jan 27 22:35:44 [8530][daemon][notice] daemonbase.cpp:264:Init(): Start ssapid
Jan 27 22:35:44 [8532] sscored.cpp:297:main(): Start sscored.
Jan 27 22:35:44 [8561][cms][notice] ssfindhostd.cpp:287:main(): Start ssfindhostd.
Jan 27 22:35:44 [8528][8563][ss-service][notice] services.cpp:1031:StartSSCamerad(): Try to start cam[1].
Jan 27 22:35:44 [8568][daemon][notice] daemonbase.cpp:264:Init(): Start ssrotated
Jan 27 22:35:44 [8528][8564][ss-service][notice] services.cpp:1031:StartSSCamerad(): Try to start cam[2].
Jan 27 22:35:44 [8528][8565][ss-service][notice] services.cpp:1031:StartSSCamerad(): Try to start cam[3].
Jan 27 22:35:44 [8568][8571][ss-service][error] ssthreadtimer.cpp:83:SendKeepAlive(): Failed to send keep alive to daemon monitor. IsSSD[0], CamId[32629], Daemon[2]
Jan 27 22:35:44 [8577][daemon][notice] daemonbase.cpp:264:Init(): Start ssnotifyd
Jan 27 22:35:44 [8578][daemon][notice] daemonbase.cpp:264:Init(): Start sslogd
Jan 27 22:35:44 [8579][daemon][notice] daemonbase.cpp:264:Init(): Start ssmobiled
Jan 27 22:35:44 [8580][daemon][notice] daemonbase.cpp:264:Init(): Start ssfailoverd
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8580][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 22:35:44 [8556][rtsp][notice] ssrtspserverd.cpp:254:main(): Start ssrtspserverd.
Jan 27 22:35:44 [8609][daemon][notice] daemonbase.cpp:264:Init(): Start sswebstreamd
Jan 27 22:35:44 [8611][daemon][notice] daemonbase.cpp:264:Init(): Start sstimelapsed
Jan 27 22:35:44 [8608][daemon][notice] daemonbase.cpp:264:Init(): Start ssarchivingd
Jan 27 22:35:44 [8549][rtsp][notice] ssrtpdataproviderd.cpp:1766:main(): Start ssrtpdataproviderd.
Jan 27 22:35:44 [8612][daemon][notice] daemonbase.cpp:264:Init(): Start ssroutined
Jan 27 22:35:44 [8655][daemon][notice] daemonbase.cpp:264:Init(): Start sscamerad2
Jan 27 22:35:44 [8653][daemon][notice] daemonbase.cpp:264:Init(): Start sscamerad1
Jan 27 22:35:44 [8656][daemon][notice] daemonbase.cpp:264:Init(): Start ssactruled
Jan 27 22:35:44 [8568][8576][messaged][error] ssmessageutils.cpp:49:SendUpdateMsgToMsgD(): Failed to send cmd [7] to ssmessaged.
Jan 27 22:35:44 [8660][daemon][notice] daemonbase.cpp:264:Init(): Start sscamerad3
Jan 27 22:35:44 [8662][daemon][notice] daemonbase.cpp:264:Init(): Start ssmessaged
Jan 27 22:35:44 [8662][messaged][notice] ssmessaged.cpp:1130:Init(): Start websocket server.
Jan 27 22:35:44 [8667][daemon][notice] daemonbase.cpp:264:Init(): Start ssdaemonmonitord
Jan 27 22:35:44 S82surveillance.sh: Start Surveillance [8.2.10-7310] end.

Start SS without any mod and one cam:

Jan 27 23:47:49 start-stop-status: start
Jan 27 23:47:50 S82surveillance.sh: Start Surveillance [8.2.10-7310] begin.
Jan 27 23:47:50 [31994][db][notice] ssdb.cpp:1782:Backup(): Backup db[system.db] successfully.
Jan 27 23:47:50 [31994][rec-share][notice] recordingshareutils.cpp:789:UpdateSSServiceLink(): Set SS service link to [/volume1/surveillance].
Jan 27 23:47:51 [31998][daemon][notice] daemonbase.cpp:264:Init(): Start ssapid
Jan 27 23:47:51 [32000] sscored.cpp:297:main(): Start sscored.
Jan 27 23:47:51 [32029][daemon][notice] daemonbase.cpp:264:Init(): Start ssarchivingd
Jan 27 23:47:51 [32039][daemon][notice] daemonbase.cpp:264:Init(): Start ssnotifyd
Jan 27 23:47:51 [32040][daemon][notice] daemonbase.cpp:264:Init(): Start sstimelapsed
Jan 27 23:47:51 [32048][cms][notice] ssfindhostd.cpp:287:main(): Start ssfindhostd.
Jan 27 23:47:51 [32055][daemon][notice] daemonbase.cpp:264:Init(): Start ssactruled
Jan 27 23:47:52 [32072][daemon][notice] daemonbase.cpp:264:Init(): Start ssfailoverd
Jan 27 23:47:52 [32072][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 23:47:52 [32072][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 23:47:52 [32072][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 23:47:52 [32072][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 23:47:52 [32072][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 23:47:52 [32072][utils][alarm] ssworkermgr.cpp:40:CreateWorkers(): Cancel terminated thread id will cause undefined behavior(segfault..). Detach thread will terminate itself.
Jan 27 23:47:52 [32073][daemon][notice] daemonbase.cpp:264:Init(): Start ssmobiled
Jan 27 23:47:52 [32070][bkg-upgrader][notice] ssbkgupgraderd.cpp:207:main(): Start ssbkgupgraderd.
Jan 27 23:47:52 [32020][rtsp][notice] ssrtpdataproviderd.cpp:1766:main(): Start ssrtpdataproviderd.
Jan 27 23:47:52 [32021][rtsp][notice] ssrtspserverd.cpp:254:main(): Start ssrtspserverd.
Jan 27 23:47:52 [32091][daemon][notice] daemonbase.cpp:264:Init(): Start ssrotated
Jan 27 23:47:52 [32091][32093][ss-service][error] ssthreadtimer.cpp:83:SendKeepAlive(): Failed to send keep alive to daemon monitor. IsSSD[0], CamId[32739], Daemon[2]
Jan 27 23:47:52 [32098][daemon][notice] daemonbase.cpp:264:Init(): Start sswebstreamd
Jan 27 23:47:52 [32097][daemon][notice] daemonbase.cpp:264:Init(): Start sslogd
Jan 27 23:47:52 [32100][daemon][notice] daemonbase.cpp:264:Init(): Start ssroutined
Jan 27 23:47:52 [32120][daemon][notice] daemonbase.cpp:264:Init(): Start ssmessaged
Jan 27 23:47:52 [32120][messaged][notice] ssmessaged.cpp:1130:Init(): Start websocket server.
Jan 27 23:47:52 [32125][daemon][notice] daemonbase.cpp:264:Init(): Start ssdaemonmonitord
Jan 27 23:47:52 S82surveillance.sh: Start Surveillance [8.2.10-7310] end.

Edited January 28, 2022 by Alonia

rekadzeav · January 28, 2022

Доброго всем дня, к сожалению файл не доступен для загрузки, если у кого есть.

Можете поделиться?

iceman · January 28, 2022

19 часов назад, montagnic сказал:

Этот этап уже пройден! Не работает

Есть подробности? Просто чем ломать сидеть что то легче написать скрипт ответов на php скажем разместить его на вебе и в днс перенаправить запросы.

Отловить бы запросы при активации что кто куда шлет и при работе и написали бы скриптик.

mihren · January 29, 2022

@Alonia There is also a library checksum check 'ss_lib_checksum'

Alonia · January 29, 2022

1 hour ago, mihren said:

@Alonia There is also a library checksum check 'ss_lib_checksum'

I think this is not relevant.

I have uploaded my libssutils.so (patched_40_cams) here for SurveillanceStation-x86_64-8.2.10-7310
The problem is that the value you modify there for the licences is checked. This means that conditions in the other libraries can no longer apply. This causes the services to terminate after a certain time.

libssutils.so

Edited January 29, 2022 by Alonia

Alonia · January 29, 2022

As example:

If I edit GetCamCnt() in the same way as from version 8.2.7-6222_(40_cams):

/* ShmDBCache::GetCamCnt() */

undefined8 ShmDBCache::GetCamCnt(void)

{
  return 0;
}

Then in the sscamerad (8.2.10) this condition fails here

lVar4 = SSShmDBCacheAt();
if ((lVar4 != 0) && (iVar3 = ShmDBCache::GetCamCnt(), iVar3 < 1)) goto LAB_00421c80;
iVar3 = UpdateSSCameradStatus(1,*(int *)(param_1 + 0x48));
lVar4 = (long)iVar3;
if (iVar3 == 0) {

In 8.2.7 (40cams), GetCamCnt is not used in the same way.

Only one value was edited in the middle of the program:

Original:

    cVar11 = '\x01';
    uVar28 = lVar26 - *(long *)(__mutex_00 + 1) >> 0x3f;
    if ((long)((lVar26 - *(long *)(__mutex_00 + 1) ^ uVar28) - uVar28) < 0x15181) {
      cVar11 = __mutex_00[1].field_0x8;

Patched:

    cVar11 = '\x00';
    uVar28 = lVar26 - *(long *)(__mutex_00 + 1) >> 0x3f;
    if ((long)((lVar26 - *(long *)(__mutex_00 + 1) ^ uVar28) - uVar28) < 0x15181) {
      cVar11 = __mutex_00[1].field_0x8;

@BemanCan you take a look at this too? I couldn't quite figure out what the modification does in 8.2.7.
I have uploaded them all here: https://drive.google.com/drive/folders/1GE5DK60Zq9EswlYNrQ_E-8eGUaQivFHm?usp=sharing

Alonia · January 29, 2022

Can someone upload a log from SS version 8.2.7-6222_40_cams?

Edited January 29, 2022 by Alonia

SDL2000 · January 29, 2022

Подскажите, фокус с VirtualDSM и установленной там SS уже не прокатывает?

Имеется ввиду, что раньше вроде можно было установить VirtualDSM на ней Surveillance station, и прокинуть с помощью CSM лицензии на SS в основной DSM.

Я так не пробовал, но вот тут пишут, что когда-то срабатывало

Попробовал сначала на виртуальной DSM 7 и предпоследней SS - нет лицензий в виртуальной DSM

Поставил DSM 6 виртуальную - тоже нет лицензий в ней на камеры.

Все это делаю на DS918+

montagnic · January 29, 2022

28 минут назад, SDL2000 сказал:

Подскажите, фокус с VirtualDSM и установленной там SS уже не прокатывает?

Имеется ввиду, что раньше вроде можно было установить VirtualDSM на ней Surveillance station, и прокинуть с помощью CSM лицензии на SS в основной DSM.

Я так не пробовал, но вот тут пишут, что когда-то срабатывало

Попробовал сначала на виртуальной DSM 7 и предпоследней SS - нет лицензий в виртуальной DSM

Поставил DSM 6 виртуальную - тоже нет лицензий в ней на камеры.

Все это делаю на DS918+

Все прокатывает. Читайте тему. Выше я писал про это. Проброса не будет. Работать ss будет только на виртуальной машине.

Edited January 29, 2022 by montagnic

Alonia · January 29, 2022

15 minutes ago, montagnic said:

Все прокатывает. Читайте тему. Выше я писал про это. Проброса не будет. Работать ss будет только на виртуальной машине.

Exactly, or I'll manage to patch a new version with @Beman

@montagnic Can you upload a log from version 8.2.7 (40 cameras) for me?

Update:

I managed to run SS for 3 hours with 3 cameras!

I need to dig deeper inside the files😀

montagnic · January 29, 2022

2 минуты назад, Alonia сказал:

Exactly, or I'll manage to patch a new version with @Beman

@montagnic Can you upload a log from version 8.2.7 (40 cameras) for me?

Update:

I managed to run SS for 3 hours with 3 cameras!

I need to dig deeper inside the files😀

Super!!!! Я сейчас не могу прислать логи, так как нет возможности. Я переехал в другую стану и нет доступа ни к DSM ни к SS.

SDL2000 · January 30, 2022

12 hours ago, montagnic said:

Все прокатывает. Читайте тему. Выше я писал про это. Проброса не будет. Работать ss будет только на виртуальной машине.

Как я понял, Вы предлагаете на вируталку поставить просто ту версию SS, которая патченная. Это немного не то. Я про другое спросил.

На свежих версиях SS в виртуалке лицензии не даются теперь?

montagnic · January 30, 2022

2 часа назад, SDL2000 сказал:

Как я понял, Вы предлагаете на вируталку поставить просто ту версию SS, которая патченная. Это немного не то. Я про другое спросил.

На свежих версиях SS в виртуалке лицензии не даются теперь?

Так я про свежие и не говорю. 8.2.7 работает без проблем. По моему не дают лицензии. Если честно не задавался таким вопросом.

Edited January 30, 2022 by montagnic

T-REX-XP · February 1, 2022

On 1/29/2022 at 10:53 PM, Alonia said:

I managed to run SS for 3 hours with 3 cameras!

Hi, do you have any updates regarding your experiment ?) Does your modification stable ? Thanks in advance

Alonia · February 2, 2022

22 hours ago, T-REX-XP said:

Hi, do you have any updates regarding your experiment ?) Does your modification stable ? Thanks in advance

I am not that far yet.

I just disabled several routines that stop the services to test.

This does not solve the problem. In the end the system kills itself, because I destroyed the complete main routine.

The following message is related to the KeepAlive function.

Jan 27 22:35:44 [8568][8576][messaged][error] ssmessageutils.cpp:49:SendUpdateMsgToMsgD(): Failed to send cmd [7] to ssmessaged.

This output is from libsshm.so File, I need to fix that.

Edited February 2, 2022 by Alonia

XPEH · February 2, 2022

Just a reminder! This is Russian forum, Please at least attempt to communicate in Russian here. Even by using lousy online translation tools. This is a common courtesy.

Напоминание! Это форум на Русском, хотя бы постарайтесь из вежливости переводить на Русский ваши сообщения.

mihren · February 5, 2022

@Alonia Попробуй изменить любой байт в libssutils.so не меняя количество лицензий. Я уверен что проверка контрольной суммы остановит станцию наблюдения.

Alonia · February 5, 2022

40 minutes ago, mihren said:

@Alonia Попробуй изменить любой байт в libssutils.so не меняя количество лицензий. Я уверен что проверка контрольной суммы остановит станцию наблюдения.

Я не могу понять, что проверяет контрольная сумма. Это похоже на контрольную сумму MD5. Я могу просто изменить его для проверки и посмотреть, что произойдет.

@Vir-US тоже не стал их дожидаться.

Контрольная сумма MD5 обычно выдается только для одного файла или архива.
Я могу посмотреть, используется ли вообще эта контрольная сумма.
Может быть, он предназначен для чего-то другого

Alonia · February 5, 2022

В целях тестирования я уменьшил количество лицензий с 2 до 1. Теперь я могу проверить, проверяет ли контрольная сумма вообще библиотеки и проверяет ли она, должно ли количество лицензий быть ровно 2 или проверяет, меньше или равно ли оно 2.

The Chief · February 5, 2022

В 29.11.2021 в 18:26, Agisofttm сказал:

вот готовый порт Surveliance Station

Зачем внутри такой огромный PACKAGE_ICON.PNG, у которого хвост от package.tgz?

SurveillanceStation-x86_64-8.2.2-5766

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation