Jump to content
XPEnology Community

SurveillanceStation-x86_64-8.2.2-5766


Recommended Posts

13 часа назад, Vir-US сказал:

Дружно скажем спасибо montagnic, Tronic и aka310. Единственные из тех, кто добавил счастья в копилку.

 

Это тебе спасибо! )))

Link to comment
Share on other sites

Подскажите пожалуйста. Ни у кого нет такого, что изображения в приложении dscam стали тормозить? Долго пытаются открыться даже в домашней сети. Когда открываются количество кадров маленькое. И еще заметил что с компьютера когда архив смотришь тоже стало подтормаживать. Крутится по центру ожидание полсекунды. Бывает. Но в основном приложением стало невозможно пользоваться

Link to comment
Share on other sites

19 часов назад, aka310 сказал:

Подскажите пожалуйста. Ни у кого нет такого, что изображения в приложении dscam стали тормозить? Долго пытаются открыться даже в домашней сети. Когда открываются количество кадров маленькое. И еще заметил что с компьютера когда архив смотришь тоже стало подтормаживать. Крутится по центру ожидание полсекунды. Бывает. Но в основном приложением стало невозможно пользоваться

Подтверждаю, после обновление на SS 8.2.7-6222 у моей жене тоже изображения в приложении DsCam стали тормозить и долго пытаются открыться видео, Android 10. А вот у меня на Android 6.0.1 такая проблема нету, интересно почему так. И на SS Client на компьютере всё нормально, 4 камеры.

Edited by meduardp
Link to comment
Share on other sites

9 минут назад, meduardp сказал:

Подтверждаю, после обновление на SS 8.2.7-6222 у моей жене тоже изображения в приложении DsCam стали тормозить и долго пытаются открыться видео, Android 10. А вот у меня на Android 6.0.1 такая проблема нету, интересно почему так. И на SS Client на компьютере всё нормально, 4 камеры.

Да, тоже при переходе на версию SS 8.2.7-6222

Link to comment
Share on other sites

Вставлю свои пять копеек - с 16 июля работает без запинки, пять камер, все разные. Выяснил приятный нюанс - при подключении извне, через поднятый на этом же nas l2tp vpn - удивительно хорошие скорость и отзывчивость временной шкалы (просмотр записанного) через web-интерфейс, и это при сотовом интернете 7-10мбит.. 

Edited by Ando
Link to comment
Share on other sites

Подтверждаю проблему с задумчивостью DSCAM. При подключении к камерам они могут раздуплятся в районе минуты, после чего ФПС очень мелкий.

Edited by Zelgadis
Link to comment
Share on other sites

11 минуту назад, dimammx сказал:

А на не крякнутой версии 8.2.7-6222 всё работает нормально?

Раньше не замечал такого, пока было 2 камеры пользовался обычными, и всегда сразу их обновлял. Версия 8.2.7 стояла, не было проблем. Но у меня еще роутер сменился, и может из за этого. Причём иногда, открываю я какую нибудь страницу, а меня бросает на страницу веб-браузера роутера. Тут же возвращаюсь назад, заново ввожу или живу ссылку- все открывается

Link to comment
Share on other sites

On 7/15/2020 at 9:41 AM, Vir-US said:

А тем временем на серверах Syno появилась версия 8.2.8-6334.. Будем посмотреть.))

 

Ух ты даже - Dahua Intelligent Video System (IVS) добавили! Наконец таки! Вот такая версия очень всем понравиться, гарантирую.

Link to comment
Share on other sites

SurveillanceStation-x86_64-8.2.7-6222_patch_40.spk 

 

Функция потокового общего ресурса не работает.
Ты такой же?

 

Stream share path function does not work.
Are you the same?

 

Link to comment
Share on other sites

6 hours ago, lollipop8x said:

Hope to have a crk for ver. 8.2.8 :(

And Why ? There is nothing new inside 8.2.8 if you don't have Xpenologed DVA3219 - just use last package that @Vir-US give us and take his time for us.

 

1 hour ago, Jeong said:

SurveillanceStation-x86_64-8.2.7-6222_patch_40.spk 

 

Функция потокового общего ресурса не работает.
Ты такой же?

 

Stream share path function does not work.
Are you the same?

 

What exactly did you mean by Stream Share>?

Link to comment
Share on other sites

7 minutes ago, Agisofttm said:

And Why ? There is nothing new inside 8.2.8 if you don't have Xpenologed DVA3219 - just use last package that @Vir-US give us and take his time for us.

 

What exactly did you mean by Stream Share>?

https://www.synology.com/en-us/knowledgebase/Surveillance/help/SurveillanceStation/camera_get_stream_path

 

This is a stream share

Edited by Jeong
Link to comment
Share on other sites

54 minutes ago, Agisofttm said:

You need to activate some other services from Application Center as follow:

1939446779_ScreenShot2020-07-30at14_44_32.thumb.png.6d5ed206139aeee82df82c107f55d8f6.png

 

And there is a result in VLC player with RTSP link:

1923622662_ScreenShot2020-07-30at14_43_26.thumb.png.9966cc34279346bf4f6e565e073c63f5.png

 

Thanks for the reply.
But I tried setting the same but it doesn't work.
I think a crack version problem, but everyone seems to be doing well.
Is there any other way to try it?

Link to comment
Share on other sites

11 minutes ago, Jeong said:

Thanks for the reply.
But I tried setting the same but it doesn't work.
I think a crack version problem, but everyone seems to be doing well.
Is there any other way to try it?

I am with same cracked version, and I'm using it all over my offices (6 total with 80 camera) - and it's working like a charm. 

When you enable those services in Application Center, open IP Camera and inside Liveview Setting new menu should appear "Multicast Settings" - if that menu is there everything should be fine with RTSP casting. 

 

In camera settings on Device Settings/Advanced what protocol you use ? Streaming to RTSP ?

Link to comment
Share on other sites

4 hours ago, Agisofttm said:

And Why ? There is nothing new inside 8.2.8 if you don't have Xpenologed DVA3219 - just use last package that @Vir-US give us and take his time for us.

 

What exactly did you mean by Stream Share>?

I have the camera Dahua A22EP. I can use it with ONVIF mode in version 8.2.8. Meanwhile, with version 8.2.7 it doesnt work (cannot active to use?). :(

Link to comment
Share on other sites

46 minutes ago, lollipop8x said:

I have the camera Dahua A22EP. I can use it with ONVIF mode in version 8.2.8. Meanwhile, with version 8.2.7 it doesnt work (cannot active to use?). :(


Every ONVIF Camera is supported. ONVIF is just Standard Protocol. If you mean that you cannot find it in "Search Camera", go to your camera, and activate UPNP (Start Device Discover)  protocol, and you will find it ;-)

 

1776672886_ScreenShot2020-07-30at18_13_19.thumb.png.43c0d23cef56938c32c5751c6422dc0f.png

378846076_ScreenShot2020-07-30at18_07_46.thumb.png.c2af62526c3a9a7a132fac3ec9ddafbd.png

Edited by Agisofttm
Link to comment
Share on other sites

4 hours ago, Vir-US said:

Всем нравится халява, а не новые функции))

Если IVS будет работать, многие возможно вернуться назад на SS. Из за этой фишки многие переходят на $70 Blue IRIS с отдельным WIN компом (Фу кака).

Я решил для себя вопрос давно по IVS, но многим он не понравиться потому что нужен Docker (CamEvents) + MQTT + NodeRed. Немного сложновато (для некоторых), да и признаться надежность падает ведь кроме SS еще три контейнера ранаються.

Edited by alexsahka
Link to comment
Share on other sites

1 minute ago, XPEH said:

TO @Agisofttm, @lollipop8x, @Jeong . Guys, please remember what part of forum you are posting то. Its just a matter of politeness to at least attempt to translate your posts to the forum's language.

Напоминание переводить сообщения на язык форума. Хотя бы из вежливости.

 

Извините, моя ошибка - теперь я буду переводить через переводчика. 👌

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...