viettanium Posted August 26, 2019 Share #151 Posted August 26, 2019 On 8/3/2019 at 1:27 AM, real3x said: The jun's r8168 driver panic > [ 5.449298] in your boot log Since there's no new compiled driver for realtek and most of the realtek NIC stop to work since the 6.2.2-24922 update, you have to attach another NIC to your motherboard. For note : In your boot log, DSM is booting fine (but no lan) hope for new realtek driver. Quote Link to comment Share on other sites More sharing options...
dragosmp Posted September 16, 2019 Share #152 Posted September 16, 2019 Hi everyone, Can I get some help? root@DiskStation:~# cd /dev/dri -ash: cd: /dev/dri: No such file or directory root@DiskStation:~# cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["hevc_dec","aac_dec","aac_enc","h264_dec","h264_enc","mpeg4part2_dec","ac3_dec","vc1_dec","vc1_enc"],"token":" Running : [ 0.000000] DMI: HP ProLiant ML10 v2, BIOS J10 05/21/2018 CPU Intel i3-4150 DSM 6.2.2 1.04b Don`t know how to enable it. Quote Link to comment Share on other sites More sharing options...
merve04 Posted September 18, 2019 Share #153 Posted September 18, 2019 On 9/16/2019 at 8:41 AM, dragosmp said: Hi everyone, Can I get some help? root@DiskStation:~# cd /dev/dri -ash: cd: /dev/dri: No such file or directory root@DiskStation:~# cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["hevc_dec","aac_dec","aac_enc","h264_dec","h264_enc","mpeg4part2_dec","ac3_dec","vc1_dec","vc1_enc"],"token":" Running : [ 0.000000] DMI: HP ProLiant ML10 v2, BIOS J10 05/21/2018 CPU Intel i3-4150 DSM 6.2.2 1.04b Don`t know how to enable it. Neither do I, I have opposite issue, I have dec/dri folder but no codec/activation.conf used legit Sn and Mac but after install complete both numbers looked different than what was inputted Quote Link to comment Share on other sites More sharing options...
snowfox Posted September 20, 2019 Share #154 Posted September 20, 2019 (edited) Hi,everyone, I use usb stick to install DSM918+_23824 with jun’s loader 1.04b on Asrock J5005 ITX,but when it reboot,synology assistant can't find it! How can I solve this problem? I need your help. Thank you! Edited September 20, 2019 by snowfox Quote Link to comment Share on other sites More sharing options...
dragosmp Posted September 21, 2019 Share #155 Posted September 21, 2019 On 9/20/2019 at 10:54 AM, snowfox said: Hi,everyone, I use usb stick to install DSM918+_23824 with jun’s loader 1.04b on Asrock J5005 ITX,but when it reboot,synology assistant can't find it! How can I solve this problem? I need your help. Thank you! Try a different usb disk. Fresh install. Quote Link to comment Share on other sites More sharing options...
dragosmp Posted September 21, 2019 Share #156 Posted September 21, 2019 (edited) root@DiskStation:~# cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["hevc_dec","aac_dec","aac_enc","h264_dec","h264_enc","mpeg4part2_dec","ac3_dec","vc1_dec","vc1_enc"],"token":" root@DiskStation:~# ls -all /dev/dri/ total 0 drwxr-xr-x 2 root root 80 Sep 21 22:49 . drwxr-xr-x 12 root root 18920 Sep 21 23:01 .. crw-rw---- 1 root video 226, 0 Sep 21 22:49 card0 crw-rw---- 1 root video 226, 128 Sep 21 22:49 renderD128 New Setup: Intel Gold G5400 Gigabyte GA-B365M-DS3H USB: Kingston Loader 1.04b with extra.lzma attached on post 4 or 5 DSM 6.2.2-24922 Update 3 Codec list worked only after I installed Photo Station and added a video. fffmpeg started, only after that codec.conf was availble. Edited September 21, 2019 by dragosmp Quote Link to comment Share on other sites More sharing options...
mervincm Posted September 21, 2019 Share #157 Posted September 21, 2019 Plex has just released a new version of plex media server with hardware transcoding support on linux with Intel 9th gen CPU. Before I buy one to upgrade my NAS, can anyone confirm functionality in Xpenology? Specifically - 918+ -6.2.X DSM -1.04b loader -Plex media server with plex pass and hw transcoding enabled -Intel 9th gen CPU with built in iGPI HD630, eg. i5-9600k Quote Link to comment Share on other sites More sharing options...
merve04 Posted September 22, 2019 Share #158 Posted September 22, 2019 (edited) Still didnt work Tried new usb, tried a SN and mac posted here, I have dev/dri and after installing ds video and playing a video file codec appears but sn wrong format error Tried again with my newly acquired legit sn/mac and it now works.. haswell pretty limited though root@TestNAS:~# cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["h264_dec","h264_enc"],"token":""} Edited September 22, 2019 by merve04 Quote Link to comment Share on other sites More sharing options...
snowfox Posted September 23, 2019 Share #159 Posted September 23, 2019 On 9/22/2019 at 4:14 AM, dragosmp said: Try a different usb disk. Fresh install. tks。Finally, I solved the problem by modifying synoboot. now, i update it to the DSM 6.2.2-24922 Update 3,it works well Quote Link to comment Share on other sites More sharing options...
guillep84 Posted September 23, 2019 Share #160 Posted September 23, 2019 Hello, I have a j4105-itx and I want to transcode. I put the SN and 2 MAC published by @Ziemowit total 0 drwxr-xr-x 2 root root 80 Sep 23 10:56. drwxr-xr-x 13 root root 18800 Sep 23 11:09 .. crw ------- 1 root root 226, 0 Sep 23 10:56 card0 crw ------- 1 root root 226, 128 Sep 23 10:56 renderD128 {"success": false, "msg": "SN format is wrong."} Because it can be? Try reinstalling the DSM, installing video station, photo station and putting a video. DSM 6.2.1-23824 Update 6 Greetings. Quote Link to comment Share on other sites More sharing options...
Olegin Posted September 23, 2019 Author Share #161 Posted September 23, 2019 @guillep84 If you are confident in the validity of sn and mac, a new clean install should help you. Codecs will be active after installing Videostation. Quote Link to comment Share on other sites More sharing options...
dragosmp Posted September 23, 2019 Share #162 Posted September 23, 2019 I don't think if you set the same SN and Mac on several device will still work OK. Try to find a different SN @mervincm I have Intel® UHD Graphics 610 on G5400 gold series is a 9th Gen cpu So it's a good probability that the 9th Gen cpu will work. Quote Link to comment Share on other sites More sharing options...
guillep84 Posted September 25, 2019 Share #163 Posted September 25, 2019 Hello, I already have transcoding working but I have some doubts. - DS video does not play DTS audio, install ffmpeg and stay the same, can anything be done? - Some covers go wrong in DS video, how can I change them or not put anything? - Plex when transcoding uses the CPU and not the GPU, do I have to have Plex PASS ?. Thank you. Quote Link to comment Share on other sites More sharing options...
dragosmp Posted September 25, 2019 Share #164 Posted September 25, 2019 5 hours ago, guillep84 said: Hello, I already have transcoding working but I have some doubts. - DS video does not play DTS audio, install ffmpeg and stay the same, can anything be done? - Some covers go wrong in DS video, how can I change them or not put anything? - Plex when transcoding uses the CPU and not the GPU, do I have to have Plex PASS ?. Thank you. Transcoding in plex work only with Plex Pass 12796 ? Sl 0:01 \_ /volume1/@appstore/Plex Media Server/Plex Transcoder -codec:0 h264 -hwaccel:0 vaapi -hwaccel_fallback_threshold:0 10 -hwaccel_output_format:0 vaapi -codec:1 dca -ss 5.9519989999999989 -analyzeduration 20000000 -probesize 20000000 -i /volume1/public/download/Dark Phoenix (2019)/Dark.Phoenix.2019.1080p.BluRay.x264-GECKOS[rarbg].mkv Quote Link to comment Share on other sites More sharing options...
Roger94 Posted October 3, 2019 Share #165 Posted October 3, 2019 Hello, I'm looking for a PCI Express x1 NIC that I can use on my Asrock J5005-ITX MB. I have tried an Intel 82574L NIC but it is not supporting a fresh install (with DSM latest version) on baremetal. Internal NIC is disabled and MAC adress of 82574L NIC has been replace by a real Synology MAC adress. Do youhave any PCI Express x1 NIC to recommend ? Quote Link to comment Share on other sites More sharing options...
BullFrog Posted October 9, 2019 Share #166 Posted October 9, 2019 (edited) 2. Transcoding (needs sn and mac from real syno hardware) I'm using my friends SN and MAC address, but after a fresh install cd /dev/dri shows nothing. -sh: cd: /dev/dri: No such file or directory cat: /usr/syno/etc/codec/activation.conf: No such file or directory What did I miss? 1.04b bootloader, DSM 6.2.2-24922 Update 3 Asrock J4105 Edited October 9, 2019 by BullFrog Quote Link to comment Share on other sites More sharing options...
bearcat Posted October 9, 2019 Share #167 Posted October 9, 2019 @BullFrog Have you tried doing any transcoding yet ? https://xpenology.com/forum/topic/21737-genuine-serial-and-mac-synology-doesnt-create-activationconf/?do=findComment&comment=123084 Quote Link to comment Share on other sites More sharing options...
BullFrog Posted October 9, 2019 Share #168 Posted October 9, 2019 absolutely not, NAS is still empty, copy in progress. I will try it tomorrow, thanks. Quote Link to comment Share on other sites More sharing options...
skodik Posted October 14, 2019 Share #169 Posted October 14, 2019 Hi, I am trying to install the D918+ with 1.04b loader on my setup with ASRock H370M-ITX/ac board. I am able to create bootable usb, boot from it but my Synology Web Assistant is not able to find my NAS. I was thinking, could it be problem with SerialNumber that I have? Is there somewhere any good tool for generating SN for 918+? Do you guys have any tips how to trubleshoot this? Thanks Quote Link to comment Share on other sites More sharing options...
IG-88 Posted October 14, 2019 Share #170 Posted October 14, 2019 14 hours ago, skodik said: am trying to install the D918+ with 1.04b loader on my setup with ASRock H370M-ITX/ac board. I am able to create bootable usb, boot from it but my Synology Web Assistant is not able to find my NAS if its not found in network (and the cpu is at least 4th gen intel) then its most likely a "to new" nic beside trying a older intel nic or a realtek 8168/8111 based nic you can also try my new extra.lzma, it contains the latest e1000e driver witch should support you newer onboard intel nic (i will have a better version in a view days but if you try with a empty disk and a separate usb drive there should be no issues with your current installation) Quote Link to comment Share on other sites More sharing options...
FrequencyLost Posted October 14, 2019 Share #171 Posted October 14, 2019 On 9/21/2019 at 10:43 PM, mervincm said: Plex has just released a new version of plex media server with hardware transcoding support on linux with Intel 9th gen CPU. Before I buy one to upgrade my NAS, can anyone confirm functionality in Xpenology? Specifically - 918+ -6.2.X DSM -1.04b loader -Plex media server with plex pass and hw transcoding enabled -Intel 9th gen CPU with built in iGPI HD630, eg. i5-9600k Hi @mervincm I was also wandering if its possible upgrade to a 9th gen with Plex's latest release. Were you successful in your endeavour or not risked it yet? Quote Link to comment Share on other sites More sharing options...
skodik Posted October 15, 2019 Share #172 Posted October 15, 2019 (edited) 23 hours ago, IG-88 said: if its not found in network (and the cpu is at least 4th gen intel) then its most likely a "to new" nic beside trying a older intel nic or a realtek 8168/8111 based nic you can also try my new extra.lzma, it contains the latest e1000e driver witch should support you newer onboard intel nic (i will have a better version in a view days but if you try with a empty disk and a separate usb drive there should be no issues with your current installation) Thank you, that could help. What if I cannot see izma file in mounted image? Edited October 15, 2019 by skodik simplification Quote Link to comment Share on other sites More sharing options...
IG-88 Posted October 15, 2019 Share #173 Posted October 15, 2019 3 minutes ago, skodik said: s how to work with izma files? where to place them etc? it mentioned in the install tutorial juns loder (img) has 3 partitions, 1st has the grub.cfg you need to edit for vid/pid of your usb device 2nd contains the extra.lzma, also the 2nd partition can be accessed by windows, so its using osfmount like with the 1st or replacing the extra.lzma later by just connecting it to a windows computer, kind special about the 1.04b 918+ is that it has two extra.lzma's, you need to replace both Quote Link to comment Share on other sites More sharing options...
skodik Posted October 15, 2019 Share #174 Posted October 15, 2019 Just now, IG-88 said: it mentioned in the install tutorial juns loder (img) has 3 partitions, 1st has the grub.cfg you need to edit for vid/pid of your usb device 2nd contains the extra.lzma, also the 2nd partition can be accessed by windows, so its using osfmount like with the 1st or replacing the extra.lzma later by just connecting it to a windows computer, kind special about the 1.04b 918+ is that it has two extra.lzma's, you need to replace both Thank you very much, I am going to find some windows computer I am on mac and the mounting is a bit difficult, but I give it a try. Quote Link to comment Share on other sites More sharing options...
IG-88 Posted October 15, 2019 Share #175 Posted October 15, 2019 1 minute ago, skodik said: I am on mac and the mounting is a bit difficult, but I give it a try. linux can also be used, as long as it can mount the partiton Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.