marigo

DSM6.2 installation on Asrock J1900ITX

Recommended Posts

Hi all,

 

I have a spare J1900 PC to try a baremetal installation of Xpenology. I have followed the tutorial and I can find the diskstation in my LAN. I use the DS918+ loader  1.04b.

When I want to install DSM I get a warning that "disk 1" will be formated. When I click "ok"  the installation will  begin but end soon with the message: "unable to format the disk, error 35".

 

I have one Sata SSD on the first SATA3 port and is recognized in the BIOS.

 

I updated the grub.cfg with the VID/PID of the USB device and changed the MAC and SN of the installation.

 

Am I missing something here?

 

 

Share this post


Link to post
Share on other sites

Thanks for your reply.

 

I have figured it out. My installed SSD had several (linux) partitions. When a new DSM has to be installed DSM don't likes a harddrive with partitions.

So I downloaded a live linux distribution, made a bootable USB en deleted all the "old" partitions so I had a clean disk.

 

The boot process with V1.04b loader works now fine and latest DSM is installed.

 

Edited by marigo
  • Like 1

Share this post


Link to post
Share on other sites

Oh yes, thats true, it's best (or close to mandatory) to start out with no partitions.

I usually place the drives in a USB dock, and use diskpart / clean from a Windows computer when I test out some different setups.

 

So, now you are running baremetal DS918+ with DSM 6.2.1-23824 - Update 1

and no problems, using the internal NIC on the J1900 mainboard?

I'm asking, as I'm about to rebuild the above mentioned Asrock Q1900-ITX one of these coming days :-)

Share this post


Link to post
Share on other sites

The v1.04 was made to override the problems with the PCI devices. I thought I had red that somewhere here.

 

Yes, I am running xpe on a J1900ITX and it's working. (so far so good)

I was used to install xpe in a KVM on Proxmox, but this is much faster than I thought it would be.

 

I guess you have something to do. ;)

  • Like 1

Share this post


Link to post
Share on other sites

Asrock Q1900-ITX: confirmed installation of

Jun's loader 1.04b  DS918+ with DSM 6.2.1-23824 - Update 1, clean install, automatic download of .pat

 

All is working well so far, added POWERBUTTON_6.1-0004.SPK for gracefull shutdown using the powerbutton.

 

Share this post


Link to post
Share on other sites

Great news!

 

Didn't  know about this power button package; thank you.

My J1900 is running just fine for about five days.

Now I see the difference between a virtual and a barebone installation. It is running much smoother now.

 

With surveillance station package and 5 IP camera's it's using between 4 - 8 % of CPU power.

I am monitoring it with Grafana, telegraf and Influxdb.

 

 

xpenology_grafana_1.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.