d3dx9 Posted April 1, 2014 Share #26 Posted April 1, 2014 Hi, dass wird schwierig, und du müsstest im richtigen Moment die richtigen Tastendrücke "drücken". Anleitungen zum Updaten findest du auf meinem Blog: http://d3dx9.de/ Quote Link to comment Share on other sites More sharing options...
Skulptis Posted April 2, 2014 Share #27 Posted April 2, 2014 habe auch einen H340 laufen. Wenn im BIOS nichts umgestellt wurde, bootet er automatisch von einem USB-Stick, den man in einen der hinteren (!) USB-Steckplätze steckt. Er hat intern noch so etwas wie einen USB-Speicher. Da ist normalerweise das Windows-Notfallstartsystem (WHSv1) drauf. Das scheint bei Dir überschrieben worden zu sein. Ist aber kein Problem, solange im BIOS nichts umgestellt wurde. (s.o.) man kann auch die bootmenüeinträge so ändern, dass man keine Tasten drücken muss. Habe ich auch so installiert. Wenn es läuft, kann man entweder den internen USB-Speicher mit dem Inhalt des Start-USB-Sticks überschreiben, oder man lässt ihn einfach hinten stecken. (Ist etwas flexibler). Als Start-Stick reicht auch ein kleiner alter Stick, da das Image von gnoboot gerade mal 32MB (!) nutzt. @d3dx9: prima Anleitung! Quote Link to comment Share on other sites More sharing options...
d3dx9 Posted April 2, 2014 Share #28 Posted April 2, 2014 Danke an alle, denen meine Anleitung gefällt, bei Intresse oder einfach nur Fragen könnt ihr mich auf Skype adden: iwebprojects Ansonsten Email: info@d3dx9.de - natürlich stehe ich auch im Board zu Verfügung.. Quote Link to comment Share on other sites More sharing options...
slam Posted April 3, 2014 Share #29 Posted April 3, 2014 @d3dx9: Schöner Blog! Vielen Dank! @all: Wichtig zu wissen ist, wenn ihr über Android auf die DS Audiostation zugreifen wollt kommt ein Fehler. Dieser resultiert anscheinend tatsächlich daraus das bei gnoboot vom Start weg keine SN mit kommt. Die Lösung ist die Venderdatei einzufügen und eine weitere anzupassen siehe [http://xpenology.com/forum/viewtopic.php?f=2&t=2765] im englischen Forenteil. Nun funktioniert auch die DS Audiostation. Also keine Panik, ist alles gut nach dem Upgrade Quote Link to comment Share on other sites More sharing options...
d3dx9 Posted April 3, 2014 Share #30 Posted April 3, 2014 @slam: Danke @all: Ich schreib dann auch nacher noch dazu ne Deutsche Anleitung Quote Link to comment Share on other sites More sharing options...
Skulptis Posted April 3, 2014 Share #31 Posted April 3, 2014 warum so kompliziert mit der vender-Datei? Einfach als bootoption beim Start mitgeben. (Man muss dann auch nicht die Prüfsumme berechnen, etc.) Das hat auch schon bei den letzten Trantor-Releases funktioniert. Bei Änderung der entsprechenden Datei (für den Betrieb menu_alpha.lst) unter Windows am Besten Notepad Plus oder so benutzen und auf den Unix-Zeilenumbruch achten. http://xpenology.com/forum/viewtopic.php?f=2&t=1353&p=15339#p15339 title gnoboot-alpha root (hd0,0) kernel /zImage sn=XXXXXXXXXXX Quote Link to comment Share on other sites More sharing options...
lopo Posted April 4, 2014 Share #32 Posted April 4, 2014 @d3dx9 Hi, hab mal zum testen eine neue Installation gemacht, die im Moment noch "jungfräulich" ist. Nach Deiner Anleitung wollte ich auf gnoBoot: Update auf 4458 Update 1 aktualisieren. Klappt aber nicht, bekomme den Fehler: DiskStation> su BusyBox v1.16.1 (2014-03-06 14:29:13 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. ~ # sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1 sed: /autoupd@te.info: No such file or directory ~ # mv /autoupd@te.info1 /autoupd@te.info Kannst Du mir einen Tip geben? Gruss lopo Quote Link to comment Share on other sites More sharing options...
d3dx9 Posted April 4, 2014 Share #33 Posted April 4, 2014 Hi lopo, hast du als erstes das Update runtergeladen? Wenn nicht, mach dies erst, danach müsste es gehen. Quote Link to comment Share on other sites More sharing options...
lopo Posted April 4, 2014 Share #34 Posted April 4, 2014 ahhhh jetzt, dummbatz ich..... Habs die *.pat auf dem Laptop gespeichert, das bringt natürlich wenig Im Moment sieht das sehr gut aus, noch 7 min Und nun fertig, hat prima geklappt. Danke! Quote Link to comment Share on other sites More sharing options...
d3dx9 Posted April 10, 2014 Share #35 Posted April 10, 2014 Ich hab mal eine Anleitung fürs Update 2 von 4458 auf meinem Blog gepostet: http://d3dx9.de/post/7 Liebe Grüße d3dx9 Quote Link to comment Share on other sites More sharing options...
synolo Posted April 10, 2014 Share #36 Posted April 10, 2014 Ich hab mal eine Anleitung fürs Update 2 von 4458 auf meinem Blog gepostet: http://d3dx9.de/post/7 Liebe Grüße d3dx9 Danke für deine Mühe,Ich finde es super. Quote Link to comment Share on other sites More sharing options...
d3dx9 Posted April 10, 2014 Share #37 Posted April 10, 2014 Kein Problem @synolo Quote Link to comment Share on other sites More sharing options...
stifler1111 Posted April 17, 2014 Share #38 Posted April 17, 2014 @ d3dx9 hab ne Frage: Wenn ich das Image 4.3 von Trantor mit dem Win32diskimager auf den Stick schreib, bottet der Rechner damit und läuft auch wunderbar. Schreib ich gnobot alpha10.4 oder 10.5 dann bootet der Rechner nicht. Kein bootdevice kommt dann. Hast du ein Tip voran das liegen kann ? Mfg Quote Link to comment Share on other sites More sharing options...
d3dx9 Posted April 17, 2014 Share #39 Posted April 17, 2014 Welches hast du genommen? vfat oder ext3? Quote Link to comment Share on other sites More sharing options...
stifler1111 Posted April 17, 2014 Share #40 Posted April 17, 2014 ich hab zuerst von deinm Blog die Version : gnoboot-alpha10.4-ext2 probiert und danach die von gnobot die gnoboot-alpha10.5-ext2 .. bei beiden kommt kein boot device gruss und vielen dank Quote Link to comment Share on other sites More sharing options...
d3dx9 Posted April 17, 2014 Share #41 Posted April 17, 2014 Hm, welche Hardware hast du? Quote Link to comment Share on other sites More sharing options...
stifler1111 Posted April 17, 2014 Share #42 Posted April 17, 2014 Ist ein Intel Board mit dem Atom D510 . http://www.intel.de/content/www/de/de/m ... 510mo.html Wie gesagt Trantors Versionen booten laufen wunderbar. Nur Gnobots image will nicht booten. Gruss Quote Link to comment Share on other sites More sharing options...
Hoovercraft Posted April 17, 2014 Share #43 Posted April 17, 2014 Ich habe heute (mehr oder minder) erfolgreich ein update von trantor 4.3 auf gnoboot 5 durchgeführt. Dabei bin ich leider bei der guten MariaDB auf einige Probleme gelaufen. Standardmeldung nach dem Versuch, mariadb zu starten, war, dass das mit my.cnf nicht möglich sei. Ich hab dann etwas rumgesucht und gefunden, das man Rechte verändern muss. chmod 777 /run/mysqld Siehe da, damit funktioniert es. Leider sind diese Einstellungen nach jedem Boot weg. Kann man das irgendwie dauerhaft ändern? Gruß Hoovercraft Quote Link to comment Share on other sites More sharing options...
d3dx9 Posted April 17, 2014 Share #44 Posted April 17, 2014 @stifler1111: Sorry, weiß da keine Lösung.. @Hoovercraft: Liegt daran dass das Image als RAMdisk geladen wird, also das OS liegt im Arbeitsspeicher, und wird nicht zurückgeschrieben, aber du kannst ein Bootscript machen, welches dass automatisch für dich macht. Lege dazu in /usr/syno/etc/rc.d/ eine Datei Namens S99ABC_chmod_mysqld.sh an und mit dem Inhalt "chmod 777 /run/mysqld". Gruß! Quote Link to comment Share on other sites More sharing options...
Hoovercraft Posted April 18, 2014 Share #45 Posted April 18, 2014 @d3dx9 super ! funzt ! Danke für die Hilfe. Quote Link to comment Share on other sites More sharing options...
d3dx9 Posted April 18, 2014 Share #46 Posted April 18, 2014 Kein Problem! Quote Link to comment Share on other sites More sharing options...
synook Posted April 18, 2014 Share #47 Posted April 18, 2014 (edited) Habe das DSM 5.0-4458 Update 2 auf dem HP 54L und bekomme die Fehlermeldung in DS Photo SN is invalid. Gnoboot ist 10.5. Habe schon versucht die menu_alpha.lst zu modifizieren, zusätzlich die vendor Datei passend zu MAC und sn gepatched alles ohne Erfolg. Hat jemand mit dem Update 2 erfolgreich eine Seriennummer eintragen können? Bei mir lässt sich Photo Station nicht aufrufen und im Paket Zentrum steht bei der photo Station läuft, darunter in blau "feedback" und wenn man auf feedback klickt steht dort "SN is invalid". Edited April 18, 2014 by Guest Quote Link to comment Share on other sites More sharing options...
d3dx9 Posted April 18, 2014 Share #48 Posted April 18, 2014 Hi, ändere mal kernel /zImage zu kernel /zImage sn=B3J4N00001 syno_hw_version=DS3612xs netif_num=1 in menu_alpha.lst Grüße Quote Link to comment Share on other sites More sharing options...
synook Posted April 18, 2014 Share #49 Posted April 18, 2014 mit Deiner Zeile wird der "SN is invalid" nicht mehr angezeigt - danke schön Quote Link to comment Share on other sites More sharing options...
d3dx9 Posted April 18, 2014 Share #50 Posted April 18, 2014 Kein Problem! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.