Аппаратный транскодинг на Asrock J4205-ITX


Recommended Posts

9 minutes ago, Kizilkum said:

с ней все работает однозначно. я проверял

поди с такой косметической правкой extra.lzma и скорость по сети норм станет ))

Link to post
Share on other sites
40 минут назад, TeleDDim сказал:

поди с такой косметической правкой extra.lzma и скорость по сети норм станет ))

Чет в это уже слабо верю...

P.S. Еще один "артефакт" обнаружил, вернул старый extra.lzma, хотел скорости какие были померить, а они остались как с новым файлом 😂

Edited by Olegin
Link to post
Share on other sites
5 часов назад, Olegin сказал:

Написал в буржуйской ветке, м.б. они быстрее протестят.

вынужден Вас огорчить

 

1.png

Edited by deloza
Link to post
Share on other sites
1 час назад, TeleDDim сказал:

а dmesg можете показать? (под катом только лучше)

 

Скрытый текст

deloza@nas:/$ dmesg

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 4.4.59+ (root@build3) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #23739 SMP PREEMPT Tue Jul 3 19:51:03 CST 2018

[    0.000000] Command line: syno_hdd_powerup_seq=1 HddHotplug=0 syno_hw_version=DS918+ vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_hdd_detect=0 syno_port_thaw=1 root=/dev/md0 sn=mac1= netif_num=1 vid=0x8564 pid=0x1000

[    0.000000] KERNEL supported cpus:

[    0.000000]   Intel GenuineIntel

[    0.000000] x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64

[    0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64

[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'

[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format.

[    0.000000] x86/fpu: Using 'eager' FPU context switches.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000003efff] usable

[    0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009efff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable

[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000012151000-0x000000005b4f9fff] usable

[    0.000000] BIOS-e820: [mem 0x000000005b4fa000-0x000000005d5f1fff] reserved

[    0.000000] BIOS-e820: [mem 0x000000005d5f2000-0x000000005d6c2fff] usable

[    0.000000] BIOS-e820: [mem 0x000000005d6c3000-0x000000005d9e6fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x000000005d9e7000-0x000000005dde2fff] reserved

[    0.000000] BIOS-e820: [mem 0x000000005dde3000-0x000000005e155fff] usable

[    0.000000] BIOS-e820: [mem 0x000000005e156000-0x000000005e156fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x000000005e157000-0x000000005e180fff] reserved

[    0.000000] BIOS-e820: [mem 0x000000005e181000-0x000000005e756fff] usable

[    0.000000] BIOS-e820: [mem 0x000000005e757000-0x000000005e758fff] reserved

[    0.000000] BIOS-e820: [mem 0x000000005e759000-0x000000005effffff] usable

[    0.000000] BIOS-e820: [mem 0x000000005f000000-0x000000007fffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] e820: update [mem 0x00100000-0x0010000f] usable ==> usable

[    0.000000] extended physical RAM map:

[    0.000000] reserve setup_data: [mem 0x0000000000000100-0x000000000003efff] usable

[    0.000000] reserve setup_data: [mem 0x000000000003f000-0x000000000003ffff] reserved

[    0.000000] reserve setup_data: [mem 0x0000000000040000-0x000000000009efff] usable

[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved

[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000000010000f] usable

[    0.000000] reserve setup_data: [mem 0x0000000000100010-0x000000000fffffff] usable

[    0.000000] reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved

[    0.000000] reserve setup_data: [mem 0x0000000012151000-0x000000005b4f9fff] usable

[    0.000000] reserve setup_data: [mem 0x000000005b4fa000-0x000000005d5f1fff] reserved

[    0.000000] reserve setup_data: [mem 0x000000005d5f2000-0x000000005d6c2fff] usable

[    0.000000] reserve setup_data: [mem 0x000000005d6c3000-0x000000005d9e6fff] ACPI NVS

[    0.000000] reserve setup_data: [mem 0x000000005d9e7000-0x000000005dde2fff] reserved

[    0.000000] reserve setup_data: [mem 0x000000005dde3000-0x000000005e155fff] usable

[    0.000000] reserve setup_data: [mem 0x000000005e156000-0x000000005e156fff] ACPI NVS

[    0.000000] reserve setup_data: [mem 0x000000005e157000-0x000000005e180fff] reserved

[    0.000000] reserve setup_data: [mem 0x000000005e181000-0x000000005e756fff] usable

[    0.000000] reserve setup_data: [mem 0x000000005e757000-0x000000005e758fff] reserved

[    0.000000] reserve setup_data: [mem 0x000000005e759000-0x000000005effffff] usable

[    0.000000] reserve setup_data: [mem 0x000000005f000000-0x000000007fffffff] reserved

[    0.000000] reserve setup_data: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved

[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved

[    0.000000] reserve setup_data: [mem 0x00000000fe042000-0x00000000fe044fff] reserved

[    0.000000] reserve setup_data: [mem 0x00000000fe900000-0x00000000fe902fff] reserved

[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

[    0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved

[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[    0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved

[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000017fffffff] usable

[    0.000000] efi: EFI v2.50 by American Megatrends

[    0.000000] efi:  ESRT=0x5dd87918  ACPI=0x5d9ca000  ACPI 2.0=0x5d9ca000  SMBIOS=0xf05e0  SMBIOS 3.0=0xf0600  MPS=0xfc9c0

[    0.000000] esrt: Reserving ESRT space from 0x000000005dd87918 to 0x000000005dd87950.

[    0.000000] SMBIOS 3.0.0 present.

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-6FFFF write-back

[    0.000000]   70000-7FFFF uncachable

[    0.000000]   80000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 0000000000 mask 7FC0000000 write-back

[    0.000000]   1 base 0040000000 mask 7FE0000000 write-back

[    0.000000]   2 base 005F000000 mask 7FFF000000 uncachable

[    0.000000]   3 base 0100000000 mask 7F80000000 write-back

[    0.000000]   4 base 00FF800000 mask 7FFF800000 write-combining

[    0.000000]   5 disabled

[    0.000000]   6 disabled

[    0.000000]   7 disabled

[    0.000000]   8 disabled

[    0.000000]   9 disabled

[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC

[    0.000000] e820: last_pfn = 0x5f000 max_arch_pfn = 0x400000000

[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576

[    0.000000] Using GB pages for direct mapping

[    0.000000] BRK [0x019fa000, 0x019fafff] PGTABLE

[    0.000000] BRK [0x019fb000, 0x019fbfff] PGTABLE

[    0.000000] BRK [0x019fc000, 0x019fcfff] PGTABLE

[    0.000000] BRK [0x019fd000, 0x019fdfff] PGTABLE

[    0.000000] BRK [0x019fe000, 0x019fefff] PGTABLE

[    0.000000] BRK [0x019ff000, 0x019fffff] PGTABLE

[    0.000000] RAMDISK: [mem 0x367fb000-0x37ffffff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x000000005D9CA000 000024 (v02 ALASKA)

[    0.000000] ACPI: XSDT 0x000000005D9CA0B0 0000D4 (v01 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: FACP 0x000000005D9D31F0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: DSDT 0x000000005D9CA230 008FB3 (v02 ALASKA A M I    01072009 INTL 20120913)

[    0.000000] ACPI: FACS 0x000000005D9E6080 000040

[    0.000000] ACPI: FPDT 0x000000005D9D3310 000044 (v01 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: FIDT 0x000000005D9D3360 00009C (v01 ALASKA A M I    01072009 AMI  00010013)

[    0.000000] ACPI: MCFG 0x000000005D9D3400 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)

[    0.000000] ACPI: DBG2 0x000000005D9D3440 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: DBGP 0x000000005D9D34C0 000034 (v01 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: HPET 0x000000005D9D3500 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: LPIT 0x000000005D9D3540 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: APIC 0x000000005D9D35A0 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: NPKT 0x000000005D9D3630 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: PRAM 0x000000005D9D36A0 000030 (v01 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: WSMT 0x000000005D9D36D0 000028 (v00 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: SSDT 0x000000005D9D3700 000B53 (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)

[    0.000000] ACPI: SSDT 0x000000005D9D4260 0016E9 (v01 Intel_ Platform 00001000 INTL 20120913)

[    0.000000] ACPI: AAFT 0x000000005D9D5950 0002DA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)

[    0.000000] ACPI: SSDT 0x000000005D9D5C30 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20120913)

[    0.000000] ACPI: SSDT 0x000000005D9D6360 00032D (v02 PmRef  Cpu0Tst  00003000 INTL 20120913)

[    0.000000] ACPI: SSDT 0x000000005D9D6690 00017C (v02 PmRef  ApTst    00003000 INTL 20120913)

[    0.000000] ACPI: SSDT 0x000000005D9D6810 002760 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)

[    0.000000] ACPI: UEFI 0x000000005D9D8F70 000042 (v01 ALASKA A M I    00000000      00000000)

[    0.000000] ACPI: BERT 0x000000005D9D8FC0 000030 (v01 INTEL  EDK2     00000001 BRXT 00000001)

[    0.000000] ACPI: WDAT 0x000000005D9D8FF0 000104 (v01                 00000000      00000000)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000003efff]

[    0.000000]   node   0: [mem 0x0000000000040000-0x000000000009efff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000fffffff]

[    0.000000]   node   0: [mem 0x0000000012151000-0x000000005b4f9fff]

[    0.000000]   node   0: [mem 0x000000005d5f2000-0x000000005d6c2fff]

[    0.000000]   node   0: [mem 0x000000005dde3000-0x000000005e155fff]

[    0.000000]   node   0: [mem 0x000000005e181000-0x000000005e756fff]

[    0.000000]   node   0: [mem 0x000000005e759000-0x000000005effffff]

[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]

[    0.000000] On node 0 totalpages: 894471

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 28 pages reserved

[    0.000000]   DMA zone: 3997 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 5722 pages used for memmap

[    0.000000]   DMA32 zone: 366186 pages, LIFO batch:31

[    0.000000]   Normal zone: 8192 pages used for memmap

[    0.000000]   Normal zone: 524288 pages, LIFO batch:31

[    0.000000] Reserving Intel graphics stolen memory at 0x60000000-0x7fffffff

[    0.000000] ACPI: PM-Timer IO Port: 0x408

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])

[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs

[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x00100000-0x00100fff]

[    0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]

[    0.000000] PM: Registered nosave memory: [mem 0x5b4fa000-0x5d5f1fff]

[    0.000000] PM: Registered nosave memory: [mem 0x5d6c3000-0x5d9e6fff]

[    0.000000] PM: Registered nosave memory: [mem 0x5d9e7000-0x5dde2fff]

[    0.000000] PM: Registered nosave memory: [mem 0x5e156000-0x5e156fff]

[    0.000000] PM: Registered nosave memory: [mem 0x5e157000-0x5e180fff]

[    0.000000] PM: Registered nosave memory: [mem 0x5e757000-0x5e758fff]

[    0.000000] PM: Registered nosave memory: [mem 0x5f000000-0x7fffffff]

[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe041fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]

[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]

[    0.000000] e820: [mem 0x80000000-0xcfffffff] available for PCI devices

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns

[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1

[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff88017fc00000 s86168 r8192 d32616 u524288

[    0.000000] pcpu-alloc: s86168 r8192 d32616 u524288 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 880465

[    0.000000] Kernel command line: syno_hdd_powerup_seq=1 HddHotplug=0 syno_hw_version=DS918+ vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_hdd_detect=0 syno_port_thaw=1 root=/dev/md0 sn=1780PDN736616 mac1=7085c28e6d60 netif_num=1 vid=0x8564 pid=0x1000

[    0.000000] Power on seq num: 1

[    0.000000] Synology Hardware Version: DS918+

[    0.000000] Vender format version: 2

[    0.000000] SYNO GPIO hdd detect pin: 0

[    0.000000] Serial Number: 1780PDN736616

[    0.000000] Mac1: 7085c28e6d60

[    0.000000] Internal netif num: 1

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.000000] Memory: 3357548K/3577884K available (5545K kernel code, 461K rwdata, 1816K rodata, 836K init, 684K bss, 220336K reserved, 0K cma-reserved)

[    0.000000] Preemptible hierarchical RCU implementation.

[    0.000000] Build-time adjustment of leaf fanout to 64.

[    0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4

[    0.000000] NR_IRQS:4352 nr_irqs:1024 16

[    0.000000] Console: colour dummy device 80x25

[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns

[    0.000000] hpet clockevent registered

[    0.000000] tsc: PIT calibration matches HPET. 1 loops

[    0.000000] tsc: Detected 1497.672 MHz processor

[    0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2995.34 BogoMIPS (lpj=1497672)

[    0.000009] pid_max: default: 32768 minimum: 301

[    0.000021] ACPI: Core revision 20150930

[    0.018159] ACPI: 7 ACPI AML tables successfully acquired and loaded

[    0.021236] Security Framework initialized

[    0.021248] AppArmor: AppArmor initialized

[    0.021271] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.021274] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.021633] Initializing cgroup subsys io

[    0.021640] Initializing cgroup subsys memory

[    0.021652] Initializing cgroup subsys devices

[    0.021656] Initializing cgroup subsys freezer

[    0.021727] CPU: Physical Processor ID: 0

[    0.021730] CPU: Processor Core ID: 0

[    0.033377] mce: CPU supports 7 MCE banks

[    0.033451] CPU0: Thermal monitoring enabled (TM1)

[    0.033497] process: using mwait in idle threads

[    0.033502] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0

[    0.033504] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0

[    0.033509] Spectre V2 : kernel not compiled with retpoline; no mitigation available!

[    0.035978] Freeing SMP alternatives memory: 28K (ffffffff81946000 - ffffffff8194d000)

[    0.043511] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.053530] TSC deadline timer enabled

[    0.053540] smpboot: CPU0: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz (family: 0x6, model: 0x5c, stepping: 0x9)

[    0.053571] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.

[    0.053581] ... version:                4

[    0.053583] ... bit width:              48

[    0.053584] ... generic registers:      4

[    0.053586] ... value mask:             0000ffffffffffff

[    0.053588] ... max period:             00007fffffffffff

[    0.053590] ... fixed-purpose events:   3

[    0.053592] ... event mask:             000000070000000f

[    0.062628] x86: Booting SMP configuration:

[    0.062633] .... node  #0, CPUs:      #1

[    0.076936] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.079792] #2 #3

[    0.110986] x86: Booted up 1 node, 4 CPUs

[    0.110990] smpboot: Total of 4 processors activated (11981.37 BogoMIPS)

[    0.115916] devtmpfs: initialized

[    0.116459] PM: Registering ACPI NVS region [mem 0x5d6c3000-0x5d9e6fff] (3293184 bytes)

[    0.116559] PM: Registering ACPI NVS region [mem 0x5e156000-0x5e156fff] (4096 bytes)

[    0.116689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns

[    0.116698] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.117731] xor: measuring software checksum speed

[    0.127654]   prefetch64-sse:  7800.000 MB/sec

[    0.137673]   generic_sse:  6716.000 MB/sec

[    0.137675] xor: using function: prefetch64-sse (7800.000 MB/sec)

[    0.137710] pinctrl core: initialized pinctrl subsystem

[    0.138090] NET: Registered protocol family 16

[    0.141702] cpuidle: using governor ladder

[    0.146727] cpuidle: using governor menu

[    0.146917] ACPI: bus type PCI registered

[    0.147039] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.147044] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820

[    0.147069] PCI: Using configuration type 1 for base access

[    0.180872] raid6: sse2x1   gen()  3449 MB/s

[    0.197900] raid6: sse2x1   xor()  1968 MB/s

[    0.214935] raid6: sse2x2   gen()  3746 MB/s

[    0.231979] raid6: sse2x2   xor()  2357 MB/s

[    0.249008] raid6: sse2x4   gen()  4289 MB/s

[    0.266058] raid6: sse2x4   xor()  2253 MB/s

[    0.266061] raid6: using algorithm sse2x4 gen() 4289 MB/s

[    0.266063] raid6: .... xor() 2253 MB/s, rmw enabled

[    0.266065] raid6: using ssse3x2 recovery algorithm

[    0.266156] ACPI: Added _OSI(Module Device)

[    0.266159] ACPI: Added _OSI(Processor Device)

[    0.266161] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.266164] ACPI: Added _OSI(Processor Aggregator Device)

[    0.274425] ACPI: Executed 3 blocks of module-level executable AML code

[    0.283796] ACPI: Interpreter enabled

[    0.283828] ACPI: (supports S0 S4 S5)

[    0.283831] ACPI: Using IOAPIC for interrupt routing

[    0.283980] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.306273] ACPI: Power Resource [FN00] (on)

[    0.307722] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.307735] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.309023] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]

[    0.309334] PCI host bridge to bus 0000:00

[    0.309340] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]

[    0.309344] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]

[    0.309347] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]

[    0.309351] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.309354] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.309358] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]

[    0.309361] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]

[    0.309365] pci_bus 0000:00: root bus resource [mem 0x60000001-0x7fffffff window]

[    0.309368] pci_bus 0000:00: root bus resource [mem 0x5f800001-0x5fffffff window]

[    0.309372] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]

[    0.309375] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]

[    0.309379] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.309398] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000

[    0.309928] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000

[    0.309957] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]

[    0.309970] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]

[    0.309980] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]

[    0.310529] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000

[    0.310590] pci 0000:00:0f.0: reg 0x10: [mem 0x91217000-0x91217fff 64bit]

[    0.310707] pci 0000:00:0f.0: PME# supported from D3hot

[    0.311153] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601

[    0.311185] pci 0000:00:12.0: reg 0x10: [mem 0x91210000-0x91211fff]

[    0.311197] pci 0000:00:12.0: reg 0x14: [mem 0x91214000-0x912140ff]

[    0.311209] pci 0000:00:12.0: reg 0x18: [io  0xf090-0xf097]

[    0.311220] pci 0000:00:12.0: reg 0x1c: [io  0xf080-0xf083]

[    0.311231] pci 0000:00:12.0: reg 0x20: [io  0xf060-0xf07f]

[    0.311242] pci 0000:00:12.0: reg 0x24: [mem 0x91213000-0x912137ff]

[    0.311297] pci 0000:00:12.0: PME# supported from D3hot

[    0.311715] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400

[    0.311809] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold

[    0.312164] pci 0000:00:13.0: System wakeup disabled by ACPI

[    0.312243] pci 0000:00:13.1: [8086:5ad9] type 01 class 0x060400

[    0.312347] pci 0000:00:13.1: PME# supported from D0 D3hot D3cold

[    0.312701] pci 0000:00:13.1: System wakeup disabled by ACPI

[    0.312779] pci 0000:00:13.2: [8086:5ada] type 01 class 0x060400

[    0.312871] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold

[    0.313225] pci 0000:00:13.2: System wakeup disabled by ACPI

[    0.313311] pci 0000:00:13.3: [8086:5adb] type 01 class 0x060400

[    0.313404] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold

[    0.313756] pci 0000:00:13.3: System wakeup disabled by ACPI

[    0.313855] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330

[    0.313893] pci 0000:00:15.0: reg 0x10: [mem 0x91200000-0x9120ffff 64bit]

[    0.313973] pci 0000:00:15.0: PME# supported from D3hot D3cold

[    0.314354] pci 0000:00:15.0: System wakeup disabled by ACPI

[    0.314490] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100

[    0.315035] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500

[    0.315100] pci 0000:00:1f.1: reg 0x10: [mem 0x91212000-0x912120ff 64bit]

[    0.315182] pci 0000:00:1f.1: reg 0x20: [io  0xf040-0xf05f]

[    0.315757] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000

[    0.315812] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]

[    0.315852] pci 0000:01:00.0: reg 0x18: [mem 0x91104000-0x91104fff 64bit]

[    0.315878] pci 0000:01:00.0: reg 0x20: [mem 0x91100000-0x91103fff 64bit pref]

[    0.315902] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug

[    0.315978] pci 0000:01:00.0: supports D1 D2

[    0.315982] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.316064] pci 0000:01:00.0: System wakeup disabled by ACPI

[    0.317344] pci 0000:00:13.0: PCI bridge to [bus 01]

[    0.317351] pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]

[    0.317357] pci 0000:00:13.0:   bridge window [mem 0x91100000-0x911fffff]

[    0.317427] pci 0000:00:13.1: PCI bridge to [bus 02]

[    0.317520] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601

[    0.317565] pci 0000:03:00.0: reg 0x10: [io  0xd050-0xd057]

[    0.317579] pci 0000:03:00.0: reg 0x14: [io  0xd040-0xd043]

[    0.317594] pci 0000:03:00.0: reg 0x18: [io  0xd030-0xd037]

[    0.317610] pci 0000:03:00.0: reg 0x1c: [io  0xd020-0xd023]

[    0.317627] pci 0000:03:00.0: reg 0x20: [io  0xd000-0xd01f]

[    0.317642] pci 0000:03:00.0: reg 0x24: [mem 0x91000000-0x910001ff]

[    0.317770] pci 0000:03:00.0: System wakeup disabled by ACPI

[    0.319349] pci 0000:00:13.2: PCI bridge to [bus 03]

[    0.319356] pci 0000:00:13.2:   bridge window [io  0xd000-0xdfff]

[    0.319361] pci 0000:00:13.2:   bridge window [mem 0x91000000-0x910fffff]

[    0.319432] pci 0000:00:13.3: PCI bridge to [bus 04]

[    0.319467] pci_bus 0000:00: on NUMA node 0

[    0.321462] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.

[    0.321591] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.

[    0.321714] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.

[    0.321834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.

[    0.321954] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.

[    0.322074] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.

[    0.322195] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.

[    0.322315] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.

[    0.324552] ACPI: Enabled 4 GPEs in block 00 to 7F

[    0.324811] vgaarb: setting as boot device: PCI:0000:00:02.0

[    0.324816] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

[    0.324822] vgaarb: loaded

[    0.324824] vgaarb: bridge control possible 0000:00:02.0

[    0.324960] SCSI subsystem initialized

[    0.325404] libata version 3.00 loaded.

[    0.325485] pps_core: LinuxPPS API ver. 1 registered

[    0.325488] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.325501] PTP clock support registered

[    0.326449] EFI Variables Facility v0.08 2004-May-17

[    0.356811] pstore: Registered efi as persistent store backend

[    0.356835] PCI: Using ACPI for IRQ routing

[    0.385118] PCI: pci_cache_line_size set to 64 bytes

[    0.385196] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]

[    0.385199] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]

[    0.385202] e820: reserve RAM buffer [mem 0x5b4fa000-0x5bffffff]

[    0.385204] e820: reserve RAM buffer [mem 0x5d6c3000-0x5fffffff]

[    0.385207] e820: reserve RAM buffer [mem 0x5e156000-0x5fffffff]

[    0.385210] e820: reserve RAM buffer [mem 0x5e757000-0x5fffffff]

[    0.385213] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]

[    0.385903] clocksource: Switched to clocksource hpet

[    0.386092] AppArmor: AppArmor Filesystem Enabled

[    0.386132] pnp: PnP ACPI init

[    0.386618] system 00:00: [io  0x0280-0x028f] has been reserved

[    0.386624] system 00:00: [io  0x0290-0x029f] has been reserved

[    0.386628] system 00:00: [io  0x02a0-0x02af] has been reserved

[    0.386635] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.387327] pnp 00:01: [dma 0 disabled]

[    0.387429] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.387532] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.388450] system 00:03: [io  0x0680-0x069f] has been reserved

[    0.388455] system 00:03: [io  0x0400-0x047f] has been reserved

[    0.388459] system 00:03: [io  0x0500-0x05fe] has been reserved

[    0.388464] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.389174] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved

[    0.389179] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved

[    0.389183] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved

[    0.389187] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved

[    0.389191] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved

[    0.389195] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved

[    0.389199] system 00:04: [mem 0xfed80000-0xfedbffff] has been reserved

[    0.389203] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved

[    0.389207] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved

[    0.389213] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.389475] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.389749] pnp: PnP ACPI: found 6 devices

[    0.401160] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.401219] pci 0000:00:13.0: PCI bridge to [bus 01]

[    0.401225] pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]

[    0.401233] pci 0000:00:13.0:   bridge window [mem 0x91100000-0x911fffff]

[    0.401243] pci 0000:00:13.1: PCI bridge to [bus 02]

[    0.401256] pci 0000:00:13.2: PCI bridge to [bus 03]

[    0.401261] pci 0000:00:13.2:   bridge window [io  0xd000-0xdfff]

[    0.401268] pci 0000:00:13.2:   bridge window [mem 0x91000000-0x910fffff]

[    0.401278] pci 0000:00:13.3: PCI bridge to [bus 04]

[    0.401293] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]

[    0.401296] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]

[    0.401300] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]

[    0.401303] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]

[    0.401307] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]

[    0.401311] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]

[    0.401314] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]

[    0.401318] pci_bus 0000:00: resource 11 [mem 0x60000001-0x7fffffff window]

[    0.401321] pci_bus 0000:00: resource 12 [mem 0x5f800001-0x5fffffff window]

[    0.401325] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]

[    0.401328] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]

[    0.401332] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]

[    0.401336] pci_bus 0000:01: resource 1 [mem 0x91100000-0x911fffff]

[    0.401339] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]

[    0.401343] pci_bus 0000:03: resource 1 [mem 0x91000000-0x910fffff]

[    0.401495] NET: Registered protocol family 2

[    0.401810] TCP established hash table entries: 32768 (order: 6, 262144 bytes)

[    0.402049] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)

[    0.402312] TCP: Hash tables configured (established 32768 bind 32768)

[    0.402366] UDP hash table entries: 2048 (order: 4, 65536 bytes)

[    0.402416] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)

[    0.402639] NET: Registered protocol family 1

[    0.403047] mce: [Hardware Error]: Machine check events logged

[    0.403100] RPC: Registered named UNIX socket transport module.

[    0.403104] RPC: Registered udp transport module.

[    0.403106] RPC: Registered tcp transport module.

[    0.403108] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.403131] pci 0000:00:02.0: Video device with shadowed ROM

[    0.403603] PCI: CLS 0 bytes, default 64

[    0.403698] Trying to unpack rootfs image as initramfs...

[    1.311352] Freeing initrd memory: 24596K (ffff8800367fb000 - ffff880038000000)

[    1.311719] t: module verification failed: signature and/or required key missing - tainting kernel

[    1.340678] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    1.340685] software IO TLB [mem 0x54e7c000-0x58e7c000] (64MB) mapped at [ffff880054e7c000-ffff880058e7bfff]

[    1.342969] audit: initializing netlink subsys (disabled)

[    1.343035] audit: type=2000 audit(1548155008.285:1): initialized

[    1.343298] Initialise system trusted keyring

[    1.369410] VFS: Disk quotas dquot_6.6.0

[    1.369446] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    1.386089] NFS: Registering the id_resolver key type

[    1.386120] Key type id_resolver registered

[    1.386122] Key type id_legacy registered

[    1.407905] async_tx: api initialized (async)

[    1.407919] Key type asymmetric registered

[    1.407924] Asymmetric key parser 'x509' registered

[    1.408011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

[    1.408018] io scheduler noop registered

[    1.408023] io scheduler deadline registered

[    1.408054] io scheduler cfq registered (default)

[    1.409527] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt

[    1.409533] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt

[    1.409539] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded

[    1.409570] pcieport 0000:00:13.1: Signaling PME through PCIe PME interrupt

[    1.409576] pcie_pme 0000:00:13.1:pcie01: service driver pcie_pme loaded

[    1.409608] pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt

[    1.409612] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt

[    1.409618] pcie_pme 0000:00:13.2:pcie01: service driver pcie_pme loaded

[    1.409649] pcieport 0000:00:13.3: Signaling PME through PCIe PME interrupt

[    1.409655] pcie_pme 0000:00:13.3:pcie01: service driver pcie_pme loaded

[    1.735296] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    2.326527] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[    2.341443] console [ttyS0] enabled

[    2.341586] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 8250

[    2.343941] tsc: Refined TSC clocksource calibration: 1497.609 MHz

[    2.343950] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x15964feca14, max_idle_ns: 440795240362 ns

[    2.362870] brd: module loaded

[    2.362972] Loading iSCSI transport class v2.0-870.

[    2.385675] ahci 0000:00:12.0: version 3.0

[    2.386109] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode

[    2.386117] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst

[    2.417344] scsi host0: ahci

[    2.450962] scsi host1: ahci

[    2.451112] ata1: SATA max UDMA/133 abar m2048@0x91213000 port 0x91213100 irq 369

[    2.451117] ata2: SATA max UDMA/133 abar m2048@0x91213000 port 0x91213180 irq 369

[    3.907784] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[    4.089820] clocksource: Switched to clocksource tsc

[    8.089852] ata1.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133

[    8.089857] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[    8.090740] ata1.00: configured for UDMA/133

[    8.752205] scsi 0:0:0:0: Direct-Access     TOSHIBA  DT01ACA050               A750 PQ: 0 ANSI: 5

[   12.104665] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)

[   12.104671] sd 0:0:0:0: [sda] 4096-byte physical blocks

[   12.104750] sd 0:0:0:0: [sda] Write Protect is off

[   12.104755] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[   12.104792] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[   12.125157] sda: sda1 sda2 sda3

[   12.125863] sd 0:0:0:0: [sda] Attached SCSI disk

[   12.394395] ata2: SATA link down (SStatus 4 SControl 300)

[   12.843679] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled

[   12.843717] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode

[   12.843723] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc

[   13.751364] scsi host2: ahci

[   14.753296] scsi host3: ahci

[   14.753442] ata3: SATA max UDMA/133 abar m512@0x91000000 port 0x91000100 irq 370

[   14.753448] ata4: SATA max UDMA/133 abar m512@0x91000000 port 0x91000180 irq 370

[   15.058288] ata3: SATA link down (SStatus 0 SControl 300)

[   16.061245] ata4: SATA link down (SStatus 0 SControl 300)

[   16.104472] i8042: PNP: No PS/2 controller found. Probing ports directly.

[   16.107919] serio: i8042 KBD port at 0x60,0x64 irq 1

[   16.107989] serio: i8042 AUX port at 0x60,0x64 irq 12

[   16.108083] i2c /dev entries driver

[   16.108351] i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A

[   16.108355] i801_smbus 0000:00:1f.1: PCI INT A: no GSI

[   16.108397] i801_smbus 0000:00:1f.1: SMBus using polling

[   16.108799] md: linear personality registered for level -1

[   16.108806] md: raid0 personality registered for level 0

[   16.108811] md: raid1 personality registered for level 1

[   16.108815] md: raid10 personality registered for level 10

[   16.109987] md: raid6 personality registered for level 6

[   16.109993] md: raid5 personality registered for level 5

[   16.109995] md: raid4 personality registered for level 4

[   16.110132] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com

[   16.110355] NET: Registered protocol family 17

[   16.110419] Key type dns_resolver registered

[   16.111122] registered taskstats version 1

[   16.111131] Loading compiled-in untrusted X.509 certificates

[   16.111136] Loading compiled-in X.509 certificates

[   16.111176] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'

[   16.113263] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'

[   16.113306] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'

[   16.113328] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'

[   16.113356] page_owner is disabled

[   16.113399] AppArmor: AppArmor sha1 policy hashing enabled

[   16.124824] hctosys: unable to open rtc device (rtc0)

[   16.126568] Freeing unused kernel memory: 836K (ffffffff81875000 - ffffffff81946000)

[   16.126575] Write protecting the kernel read-only data: 8192k

[   16.127057] Freeing unused kernel memory: 588K (ffff88000156d000 - ffff880001600000)

[   16.128186] Freeing unused kernel memory: 232K (ffff8800017c6000 - ffff880001800000)

[   20.217626] ACPI: bus type USB registered

[   20.217682] usbcore: registered new interface driver usbfs

[   20.217704] usbcore: registered new interface driver hub

[   20.217765] usbcore: registered new interface driver ethub

[   20.217794] usbcore: registered new device driver usb

[   20.380912] xhci_hcd 0000:00:15.0: xHCI Host Controller

[   20.380928] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1

[   20.582075] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109010

[   20.582084] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported

[   20.582482] hub 1-0:1.0: USB hub found

[   20.582502] hub 1-0:1.0: 8 ports detected

[   20.583824] xhci_hcd 0000:00:15.0: xHCI Host Controller

[   20.583831] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2

[   20.583886] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.

[   20.584143] hub 2-0:1.0: USB hub found

[   20.584165] hub 2-0:1.0: 7 ports detected

[   20.616913] usbcore: registered new interface driver usb-storage

[   20.646711] VMware PVSCSI driver - version 1.0.5.0-k

[   20.654759] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)

[   20.663001] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)

[   20.680906] Fusion MPT base driver 3.04.20

[   20.680911] Copyright (c) 1999-2008 LSI Corporation

[   20.697313] Fusion MPT SPI Host driver 3.04.20

[   20.718614] Fusion MPT misc device (ioctl) driver 3.04.20

[   20.718702] mptctl: Registered with Fusion MPT base driver

[   20.718706] mptctl: /dev/mptctl @ (major,minor=10,220)

[   20.735976] megasas: 06.808.16.00-rc1

[   20.777919] mpt3sas version 09.102.00.00 loaded

[   20.795322] rtc_cmos 00:05: RTC can wake from S4

[   20.795853] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0

[   20.795939] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram

[   20.833439] apollolake_synobios: module license 'Synology Inc.' taints kernel.

[   20.833445] Disabling lock debugging due to kernel taint

[   20.834122] 2019-1-22 11:3:47 UTC

[   20.834127] synobios: load, major number 201

[   20.834133] Brand: Synology

[   20.834137] Model: DS-918+

[   20.834140] This is default settings: set group disks wakeup number to 1, spinup time deno 1

[   20.834146] synobios cpu_arch proc entry initialized

[   20.834149] synobios crypto_hw proc entry initialized

[   20.834152] synobios syno_platform proc entry initialized

[   20.834174] synobios open /dev/ttyS1 success

[   20.906046] usb 1-6: new high-speed USB device number 2 using xhci_hcd

[   20.935137] synobios: unload

[   20.959223] md: Autodetecting RAID arrays.

[   21.022618] md: invalid raid superblock magic on sda3

[   21.027920] md: sda3 does not have a valid v0.90 superblock, not importing!

[   21.027968] md: Scanned 3 and added 2 devices.

[   21.027971] md: autorun ...

[   21.027973] md: considering sda1 ...

[   21.027980] md:  adding sda1 ...

[   21.027984] md: sda2 has different UUID to sda1

[   21.027991] md: created md0

[   21.027994] md: bind<sda1>

[   21.028038] md: running: <sda1>

[   21.040080] usb 1-6: not running at top speed

[   21.409016] usb 1-6: new high-speed USB device number 2 using xhci_hcd

[   21.543044] usb 1-6: not running at top speed

[   21.911996] usb 1-6: new high-speed USB device number 2 using xhci_hcd

[   22.046029] usb 1-6: not running at top speed

[   22.414973] usb 1-6: new high-speed USB device number 2 using xhci_hcd

[   22.549007] usb 1-6: not running at top speed

[   22.756007] md/raid1:md0: active with 1 out of 16 mirrors

[   22.917954] usb 1-6: new high-speed USB device number 2 using xhci_hcd

[   23.051983] usb 1-6: not running at top speed

[   23.420930] usb 1-6: new high-speed USB device number 2 using xhci_hcd

[   23.554960] usb 1-6: not running at top speed

[   23.555798] usb-storage 1-6:1.0: USB Mass Storage device detected

[   23.755991] md0: detected capacity change from 0 to 2549940224

[   23.756021] md: considering sda2 ...

[   23.756029] md:  adding sda2 ...

[   23.758271] md: created md1

[   23.758278] md: bind<sda2>

[   23.758299] md: running: <sda2>

[   23.763959] scsi host4: usb-storage 1-6:1.0

[   23.766031] md/raid1:md1: active with 1 out of 16 mirrors

[   23.772944] md1: detected capacity change from 0 to 2147418112

[   23.772984] md: ... autorun DONE.

[   24.768362] scsi 4:0:0:0: Direct-Access     Jetflash Transcend 16G            1.00 PQ: 0 ANSI: 6

[   24.768912] sd 4:0:0:0: [synoboot] 30837309 512-byte logical blocks: (15.8 GB/14.7 GiB)

[   24.769045] sd 4:0:0:0: [synoboot] Write Protect is off

[   24.769050] sd 4:0:0:0: [synoboot] Mode Sense: 23 00 00 00

[   24.769178] sd 4:0:0:0: [synoboot] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA

[   24.773638] random: nonblocking pool is initialized

[   24.786963] synoboot: synoboot1 synoboot2 synoboot3

[   24.788548] sd 4:0:0:0: [synoboot] Attached SCSI removable disk

[   28.769990] EXT4-fs (md0): barriers disabled

[   28.796780] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:

[   54.884258] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1

[   57.847747] EXT4-fs (md0): re-mounted. Opts: (null)

[  107.034492] sd 0:0:0:0: Attached scsi generic sg0 type 0

[  107.035454] sd 4:0:0:0: Attached scsi generic sg1 type 0

[  107.457294] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k

[  108.785606] zram: Added device: zram0

[  108.788530] zram: Added device: zram1

[  108.789797] zram: Added device: zram2

[  108.791065] zram: Added device: zram3

[  108.804249] zram0: detected capacity change from 0 to 528482304

[  108.847510] Adding 516092k swap on /dev/zram0.  Priority:1 extents:1 across:516092k SS

[  109.840266] zram1: detected capacity change from 0 to 528482304

[  109.857171] Adding 516092k swap on /dev/zram1.  Priority:1 extents:1 across:516092k SS

[  109.861198] zram2: detected capacity change from 0 to 528482304

[  109.873003] Adding 516092k swap on /dev/zram2.  Priority:1 extents:1 across:516092k SS

[  109.878191] zram3: detected capacity change from 0 to 528482304

[  109.890596] Adding 516092k swap on /dev/zram3.  Priority:1 extents:1 across:516092k SS

[  170.846952] NET: Registered protocol family 10

[  170.903986] sit: IPv6 over IPv4 tunneling driver

[  171.022387] init: syno-auth-check main process (5671) killed by TERM signal

[  172.581250] SSE version of gcm_enc/dec engaged.

[  172.648837] fuse init (API version 7.23)

[  172.707030] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI

[  172.707035] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.

[  172.729184] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3

[  172.729191] Copyright (c) 2007-2015 Intel Corporation.

[  172.740027] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k

[  172.740033] ixgbe: Copyright (c) 1999-2015 Intel Corporation.

[  172.778659] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded

[  172.794332] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

[  172.794349] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com>

                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.

                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.

[  172.954983] systemd-udevd[6236]: starting version 204

[  172.974803] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0

[  172.974813] ACPI: Power Button [PWRB]

[  173.037593] Linux agpgart interface v0.103

[  173.522482] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[  173.522488] [drm] Driver supports precise vblank timestamp query.

[  173.522646] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem

[  173.523430] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)

[  173.526949] BUG: unable to handle kernel NULL pointer dereference at           (null)

[  173.535203] IP: [<          (null)>]           (null)

[  173.540515] PGD 173e92067 PUD 179ea4067 PMD 0

[  173.545248] Oops: 0010 [#1] PREEMPT SMP

[  173.549436] Modules linked in: i915(E+) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) cfbfillrect(E) cfbcopyarea(E) cfbimgblt(E) drm(E) fb(E) fbdev intel_agp(E) intel_gtt(E) agpgart(E) video backlight button synoacl_vfs(PO) hfsplus md4 hmac r8168(OE) ixgbe(E) igb(O) i2c_algo_bit e1000e(O) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd rtc_cmos(E) mdio(E) mpt3sas(E) raid_class(E) scsi_transport_sas(E) megaraid_sas(E) megaraid(E)

[  173.625451] mptctl(E) mptspi(E) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd usbcore usb_common t(OE) [last unloaded: apollolake_synobios]

[  173.645544] CPU: 2 PID: 6671 Comm: insmod Tainted: P           OE   4.4.59+ #23739

[  173.653463] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J3455-ITX, BIOS P1.20 12/16/2016

[  173.663511] task: ffff880178fe2300 ti: ffff8801754e8000 task.ti: ffff8801754e8000

[  173.671386] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)

[  173.679280] RSP: 0018:ffff8801754eb950  EFLAGS: 00010202

[  173.684844] RAX: 0000000000000246 RBX: ffff88005a2c81c0 RCX: 0000000000000010

[  173.692330] RDX: 0000000000000002 RSI: 0000000000000002 RDI: ffff88005a2c81c0

[  173.699805] RBP: ffff8801754eb970 R08: 0000000000000000 R09: 0000000000000000

[  173.707337] R10: 0000000001467908 R11: 0000000000000001 R12: ffff8801754eb990

[  173.714815] R13: 0000000000000002 R14: 0000000000000002 R15: ffff88005a2c8ba0

[  173.722288] FS:  00007eff3b300700(0000) GS:ffff88017fd00000(0000) knlGS:0000000000000000

[  173.730805] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033

[  173.736874] CR2: 0000000000000000 CR3: 0000000179ca9000 CR4: 00000000003406f0

[  173.744389] Stack:

[  173.746507] ffffffff8140c269 ffff88005a2c81c0 ffff88005a2c8000 ffff88005a2c81c0

[  173.754330] ffff8801754eb9b8 ffffffffa05a8a68 ffff8801754eb9e7 0000000000000000

[  173.762184] 0000000100000040 ffff8801754eb98c ffff001000010040 ffff8801754eb9d0

[  173.770007] Call Trace:

[  173.772584] [<ffffffff8140c269>] ? i2c_transfer+0x79/0x90

[  173.778337] [<ffffffffa05a8a68>] drm_dp_dual_mode_read+0x58/0x80 [drm_kms_helper]

[  173.786254] [<ffffffffa05a8cb2>] drm_dp_dual_mode_detect+0x32/0x150 [drm_kms_helper]

[  173.794532] [<ffffffffa068eadc>] lspcon_init+0x6c/0x1a0 [i915]

[  173.800803] [<ffffffffa0676480>] intel_ddi_init+0x2d0/0x4f0 [i915]

[  173.807417] [<ffffffffa0654537>] intel_modeset_init+0x15e7/0x1a70 [i915]

[  173.814614] [<ffffffffa068e507>] ? intel_setup_gmbus+0x2e7/0x310 [i915]

[  173.821724] [<ffffffffa05c9ccf>] i915_driver_load+0xa0f/0xe00 [i915]

[  173.828528] [<ffffffffa05d4797>] i915_pci_probe+0x27/0x40 [i915]

[  173.834899] [<ffffffff812fb5bc>] pci_device_probe+0x8c/0x100

[  173.840946] [<ffffffff81384271>] driver_probe_device+0x1f1/0x310

[  173.847336] [<ffffffff81384412>] __driver_attach+0x82/0x90

[  173.853165] [<ffffffff81384390>] ? driver_probe_device+0x310/0x310

[  173.859749] [<ffffffff81382301>] bus_for_each_dev+0x61/0xa0

[  173.865683] [<ffffffff81383d09>] driver_attach+0x19/0x20

[  173.871338] [<ffffffff81383933>] bus_add_driver+0x1b3/0x230

[  173.877264] [<ffffffffa0705000>] ? 0xffffffffa0705000

[  173.882681] [<ffffffff81384c1b>] driver_register+0x5b/0xe0

[  173.888506] [<ffffffff812fa097>] __pci_register_driver+0x47/0x50

[  173.894949] [<ffffffffa070503e>] i915_init+0x3e/0x45 [i915]

[  173.900892] [<ffffffff810003b6>] do_one_initcall+0x86/0x1b0

[  173.906800] [<ffffffff810df1d8>] do_init_module+0x56/0x1be

[  173.912640] [<ffffffff810b554d>] load_module+0x1ded/0x2070

[  173.918467] [<ffffffff810b28b0>] ? __symbol_put+0x50/0x50

[  173.924229] [<ffffffff810b5959>] SYSC_finit_module+0x79/0x80

[  173.930240] [<ffffffff810b5979>] SyS_finit_module+0x9/0x10

[  173.936074] [<ffffffff81566b17>] entry_SYSCALL_64_fastpath+0x12/0x6a

[  173.942826] Code:  Bad RIP value.

[  173.946322] RIP  [<          (null)>]           (null)

[  173.951720] RSP <ffff8801754eb950>

[  173.955383] CR2: 0000000000000000

[  173.958863] ---[ end trace aded0177f4aa3ffc ]---

[  174.068407] ------------[ cut here ]------------

[  174.073255] WARNING: CPU: 2 PID: 6671 at kernel/softirq.c:150 __local_bh_enable_ip+0x65/0x90()

[  174.082276] Modules linked in: i915(E+) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) cfbfillrect(E) cfbcopyarea(E) cfbimgblt(E) drm(E) fb(E) fbdev intel_agp(E) intel_gtt(E) agpgart(E) video backlight button synoacl_vfs(PO) hfsplus md4 hmac r8168(OE) ixgbe(E) igb(O) i2c_algo_bit e1000e(O) vxlan ip6_udp_tunnel udp_tunnel fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 cryptd ecryptfs sha256_generic ecb aes_x86_64 authenc des_generic ansi_cprng cts md5 cbc cpufreq_powersave cpufreq_performance acpi_cpufreq processor cpufreq_stats dm_snapshot dm_bufio crc_itu_t crc_ccitt quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel ipv6 zram sg etxhci_hcd rtc_cmos(E) mdio(E) mpt3sas(E) raid_class(E) scsi_transport_sas(E) megaraid_sas(E) megaraid(E)

[  174.158251] mptctl(E) mptspi(E) mptscsih(E) mptbase(E) scsi_transport_spi(E) megaraid_mbox(E) megaraid_mm(E) vmw_pvscsi(E) BusLogic(E) usb_storage xhci_pci xhci_hcd usbcore usb_common t(OE) [last unloaded: apollolake_synobios]

[  174.178385] CPU: 2 PID: 6671 Comm: insmod Tainted: P      D    OE   4.4.59+ #23739

[  174.186330] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J3455-ITX, BIOS P1.20 12/16/2016

[  174.196323] 0000000000000000 ffff8801754eb658 ffffffff812b541d 0000000000000000

[  174.204149] ffffffff8172073c ffff8801754eb690 ffffffff81046ced 0000000000000201

[  174.211973] ffff880178fe2300 ffff880178fe2978 ffff880178fe2300 ffff880172d297e8

[  174.219807] Call Trace:

[  174.222403] [<ffffffff812b541d>] dump_stack+0x4d/0x70

[  174.227800] [<ffffffff81046ced>] warn_slowpath_common+0x7d/0xc0

[  174.234078] [<ffffffff81046de6>] warn_slowpath_null+0x16/0x20

[  174.240185] [<ffffffff8104a555>] __local_bh_enable_ip+0x65/0x90

[  174.246499] [<ffffffff81566665>] _raw_spin_unlock_bh+0x15/0x20

[  174.252700] [<ffffffff810c1e0b>] cgroup_exit+0x4b/0xa0

[  174.258167] [<ffffffff8104963d>] do_exit+0x36d/0xab0

[  174.263472] [<ffffffff810073b4>] oops_end+0x84/0xc0

[  174.268670] [<ffffffff8103a2eb>] no_context+0xfb/0x2b0

[  174.274144] [<ffffffff8103a510>] __bad_area_nosemaphore+0x70/0x1f0

[  174.280694] [<ffffffff8103a69e>] bad_area_nosemaphore+0xe/0x10

[  174.286885] [<ffffffff8103a8e9>] __do_page_fault+0x79/0x370

[  174.292838] [<ffffffff8103ac1c>] do_page_fault+0xc/0x10

[  174.298424] [<ffffffff815681b2>] page_fault+0x22/0x30

[  174.303817] [<ffffffff8140c269>] ? i2c_transfer+0x79/0x90

[  174.309570] [<ffffffffa05a8a68>] drm_dp_dual_mode_read+0x58/0x80 [drm_kms_helper]

[  174.317511] [<ffffffffa05a8cb2>] drm_dp_dual_mode_detect+0x32/0x150 [drm_kms_helper]

[  174.325796] [<ffffffffa068eadc>] lspcon_init+0x6c/0x1a0 [i915]

[  174.332084] [<ffffffffa0676480>] intel_ddi_init+0x2d0/0x4f0 [i915]

[  174.338739] [<ffffffffa0654537>] intel_modeset_init+0x15e7/0x1a70 [i915]

[  174.345913] [<ffffffffa068e507>] ? intel_setup_gmbus+0x2e7/0x310 [i915]

[  174.353010] [<ffffffffa05c9ccf>] i915_driver_load+0xa0f/0xe00 [i915]

[  174.359840] [<ffffffffa05d4797>] i915_pci_probe+0x27/0x40 [i915]

[  174.366234] [<ffffffff812fb5bc>] pci_device_probe+0x8c/0x100

[  174.372275] [<ffffffff81384271>] driver_probe_device+0x1f1/0x310

[  174.378670] [<ffffffff81384412>] __driver_attach+0x82/0x90

[  174.384508] [<ffffffff81384390>] ? driver_probe_device+0x310/0x310

[  174.391127] [<ffffffff81382301>] bus_for_each_dev+0x61/0xa0

[  174.397076] [<ffffffff81383d09>] driver_attach+0x19/0x20

[  174.402741] [<ffffffff81383933>] bus_add_driver+0x1b3/0x230

[  174.408652] [<ffffffffa0705000>] ? 0xffffffffa0705000

[  174.414048] [<ffffffff81384c1b>] driver_register+0x5b/0xe0

[  174.419881] [<ffffffff812fa097>] __pci_register_driver+0x47/0x50

[  174.426338] [<ffffffffa070503e>] i915_init+0x3e/0x45 [i915]

[  174.432258] [<ffffffff810003b6>] do_one_initcall+0x86/0x1b0

[  174.438219] [<ffffffff810df1d8>] do_init_module+0x56/0x1be

[  174.444037] [<ffffffff810b554d>] load_module+0x1ded/0x2070

[  174.449860] [<ffffffff810b28b0>] ? __symbol_put+0x50/0x50

[  174.455605] [<ffffffff810b5959>] SYSC_finit_module+0x79/0x80

[  174.461622] [<ffffffff810b5979>] SyS_finit_module+0x9/0x10

[  174.467458] [<ffffffff81566b17>] entry_SYSCALL_64_fastpath+0x12/0x6a

[  174.474209] ---[ end trace aded0177f4aa3ffd ]---

[  174.758187] Btrfs loaded, crc32c=crc32c-intel

[  174.782642] exFAT: Version 1.2.9

[  174.901898] jme: JMicron JMC2XX ethernet driver version 1.0.8

[  174.930898] sky2: driver version 1.30

[  175.044500] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.63

[  175.070662] QLogic/NetXen Network Driver v4.0.82

[  175.085211] Solarflare NET driver v4.0

[  175.105778] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI

[  175.113335] e1000: Copyright (c) 1999-2006 Intel Corporation.

[  175.129548] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de

[  175.145622] VMware vmxnet3 virtual NIC driver - version 1.4.5.0-k-NAPI

[  175.182345] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)

[  175.269741] usbcore: registered new interface driver ax88179_178a

[  175.408598] 2019-1-22 11:6:22 UTC

[  175.412098] synobios: load, major number 201

[  175.416623] Brand: Synology

[  175.419622] Model: DS-918+

[  175.422495] This is default settings: set group disks wakeup number to 1, spinup time deno 1

[  175.431397] synobios cpu_arch proc entry initialized

[  175.436644] synobios crypto_hw proc entry initialized

[  175.441985] synobios syno_platform proc entry initialized

[  175.447723] synobios open /dev/ttyS1 success

[  177.430307] eth0: 0xffffc900000de000, 70:85:c2:8e:6d:60, IRQ 372

[  177.504075] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[  179.844505] init: dhcp-client (eth0) main process (7649) killed by TERM signal

[  180.522707] r8168: eth0: link up

[  180.525965] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[  181.362448] md: md2 stopped.

[  181.366526] md: bind<sda3>

[  181.379220] md/raid0:md2: too few disks (1 of 2) - aborting!

[  181.401206] md2: detected capacity change from 0 to 495170093056

[  181.408419] Buffer I/O error on dev md2, logical block 0, async page read

[  181.415214] Buffer I/O error on dev md2, logical block 0, async page read

[  181.422537] Buffer I/O error on dev md2, logical block 0, async page read

[  181.429334] md2: unable to read partition table

[  181.434280] Buffer I/O error on dev md2, logical block in range 120889344 + 0-2(12) , async page read

[  181.459495] md2: detected capacity change from 495170093056 to 0

[  181.465560] md: md2: set sda3 to auto_remap [0]

[  181.470123] md: md2 stopped.

[  181.473019] md: unbind<sda3>

[  181.482264] md: export_rdev(sda3)

[  181.507249] md: md2 stopped.

[  181.511111] md: bind<sda3>

[  181.516705] md/raid0:md2: too few disks (1 of 2) - aborting!

[  181.534466] md2: detected capacity change from 0 to 495170093056

[  181.540679] Buffer I/O error on dev md2, logical block in range 0 + 0-2(12) , async page read

[  181.549190] Buffer I/O error on dev md2, logical block 0, async page read

[  181.555970] Buffer I/O error on dev md2, logical block 0, async page read

[  181.562747] md2: unable to read partition table

[  181.585412] Buffer I/O error on dev md2, logical block in range 120889344 + 0-2(12) , async page read

[  181.642626] Buffer I/O error on dev md2, logical block 120891120, async page read

[  181.720231] Buffer I/O error on dev md2, logical block 120891120, async page read

[  181.758053] init: dhcp-client (eth0) main process (7940) killed by TERM signal

[  181.788346] Buffer I/O error on dev md2, logical block 120891120, async page read

[  181.817705] Buffer I/O error on dev md2, logical block 120891120, async page read

[  181.851933] Buffer I/O error on dev md2, logical block in range 0 + 0-2(12) , async page read

[  181.860673] Buffer I/O error on dev md2, logical block in range 120889344 + 0-2(12) , async page read

[  181.869967] Buffer I/O error on dev md2, logical block in range 120889344 + 0-2(12) , async page read

[  181.870585] Buffer I/O error on dev md2, logical block in range 120889344 + 0-2(12) , async page read

[  181.888399] Buffer I/O error on dev md2, logical block in range 0 + 0-2(12) , async page read

[  181.896970] Buffer I/O error on dev md2, logical block in range 0 + 0-2(12) , async page read

[  181.904649] Buffer I/O error on dev md2, logical block in range 120889344 + 0-2(12) , async page read

[  183.764891] Buffer I/O error on dev md2, logical block 0, async page read

[  188.758859] init: system-profile-tuning main process (8621) terminated with status 255

[  189.075835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[  189.114965] ehci-pci: EHCI PCI platform driver

[  189.186690] uhci_hcd: USB Universal Host Controller Interface driver

[  189.242499] usbcore: registered new interface driver usblp

[  189.340259] usbcore: registered new interface driver usbhid

[  189.346359] usbhid: USB HID core driver

[  192.004749] ata1.00: configured for UDMA/133

[  192.009976] ata1: EH complete

[  193.785229] loop: module loaded

[  196.733799] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(7085c28e6d60).

[  197.007048] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized

[  197.037461] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288

[  197.051951] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully

[  197.092944] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled.

[  197.101688] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled.

[  197.109857] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.

[  197.119241] iSCSI:target_core_ep.c:813:ep_attach_hba RODSP plugin for epio is enabled.

[  197.127531] iSCSI:target_core_ep.c:820:ep_attach_hba ODX Token Manager is enabled.

[  401.305961] init: smbd main process (9547) killed by TERM signal

[  405.521024] init: smbd main process (14998) killed by HUP signal

[  405.527515] init: smbd main process ended, respawning

[  434.315719] init: synoscheduler-vmtouch main process (5096) killed by TERM signal

[  513.044110] init: synoscheduler-vmtouch main process (15366) killed by TERM signal

[ 1658.270757] buffer_io_error: 30 callbacks suppressed

[ 1658.276008] Buffer I/O error on dev md2, logical block in range 0 + 0-2(12) , async page read

[ 1658.292801] buffer_io_error: 13 callbacks suppressed

[ 1658.298105] Buffer I/O error on dev md2, logical block 0, async page read

[ 1658.305454] Buffer I/O error on dev md2, logical block in range 120889344 + 0-2(12) , async page read

[ 1658.315207] Buffer I/O error on dev md2, logical block in range 120889344 + 0-2(12) , async page read

[ 1658.324955] Buffer I/O error on dev md2, logical block in range 0 + 0-2(12) , async page read

[ 1658.333922] Buffer I/O error on dev md2, logical block in range 0 + 0-2(12) , async page read

[ 1658.342994] Buffer I/O error on dev md2, logical block in range 0 + 0-2(12) , async page read

[ 1658.363809] Buffer I/O error on dev md2, logical block 0, async page read

[ 1658.371098] Buffer I/O error on dev md2, logical block 0, async page read

[ 1658.378321] Buffer I/O error on dev md2, logical block 0, async page read

[ 1658.415315] md2: detected capacity change from 495170093056 to 0

[ 1658.421628] md: md2: set sda3 to auto_remap [0]

[ 1658.426372] md: md2 stopped.

[ 1658.429400] md: unbind<sda3>

[ 1658.589244] md: export_rdev(sda3)

[ 1694.705734] sfdisk (17596): drop_caches: 3

[ 1695.334766] sfdisk (17598): drop_caches: 3

[ 1698.169531] sfdisk (17613): drop_caches: 3

[ 1700.070768] md: bind<sda5>

[ 1700.292086] md/raid1:md2: active with 1 out of 1 mirrors

[ 1700.320514] md2: detected capacity change from 0 to 495160786944

[ 1710.733202] BTRFS: device label 2019.01.22-11:31:57 v23739 devid 1 transid 3 /dev/vg1000/lv

[ 1715.225011] BTRFS info (device dm-0): using free space tree

[ 1715.230854] BTRFS info (device dm-0): has skinny extents

[ 1715.236432] BTRFS info (device dm-0): flagging fs with big metadata feature

[ 1715.311229] BTRFS: creating free space tree

[ 1715.315791] BTRFS info (device dm-0): setting 1 ro feature flag

[ 1715.384087] BTRFS info (device dm-0): creating UUID tree

[ 1716.747973] BTRFS info (device dm-0): setting 2 feature flag

[ 1720.765556] BTRFS info (device dm-0): enabling auto syno reclaim space

[ 1720.772422] BTRFS info (device dm-0): using free space tree

[ 1720.778280] BTRFS info (device dm-0): has skinny extents

[ 1722.341038] BTRFS info (device dm-0): qgroup scan completed (inconsistency flag cleared)

[ 1722.725042] BTRFS info (device dm-0): using free space tree

[ 1776.482655] md: md2: set sda5 to auto_remap [1]

deloza@nas:/$

Скрытый текст

 

 

 

Edited by deloza
Link to post
Share on other sites
24 минуты назад, deloza сказал:

вынужден Вас огорчить

для чистоты эксперимента я бы запустил видосик какой то. сразу после инсталляции у меня ее тоже не было. чуть позже появилась

Link to post
Share on other sites
14 минуты назад, Kizilkum сказал:

для чистоты эксперимента я бы запустил видосик какой то. сразу после инсталляции у меня ее тоже не было. чуть позже появилась

не в этом дело. Долгая загрузка, глючность GUI и проблемы со скоростью остались.

 

2.png

Edited by deloza
Link to post
Share on other sites
30 minutes ago, TeleDDim said:

а dmesg можете показать? (под катом только лучше)

вы там затрите серийник свой  и мак, прошу прощения что не предупредил (

Link to post
Share on other sites
14 minutes ago, Kizilkum said:

для чистоты эксперимента я бы запустил видосик какой то. сразу после инсталляции у меня ее тоже не было. чуть позже появилась

А что делать с ошибкой во время загрузки?? Она же не пропала никуда. Собственно по этому и девайса нету...

Link to post
Share on other sites
1 minute ago, T-REX-XP said:

А что делать с ошибкой во время загрузки??

значит дело было не в drm, вообще первой выпадает процедура i2c_tranfer, она в модуле i2c, я так понимаю с ним как раз слинкованы модули drm и i915  - может они уже из-за него дальше сыпятся. Но мне удивительно, почему этого всего на 1.03 не происходило.

  • Thanks 1
Link to post
Share on other sites
22 минуты назад, deloza сказал:

Долгая загрузка, глючность GUI и проблемы со скоростью остались

за 4205 ничего сказать не могу. а на гигабайте 3455 у меня была нормальная загузка и скорость копирования порядка 80-85 мегабайт. это конечно мало, но все же не 3

 

22 минуты назад, TeleDDim сказал:

вы там затрите серийник свой  и мак, прошу прощения что не предупредил

тут благородные доны. свои имеются в достатке 😂

24 минуты назад, T-REX-XP сказал:

А что делать с ошибкой во время загрузки??

уточните плиз, о какой ошибке?

Link to post
Share on other sites
3 minutes ago, Kizilkum said:

за 4205 ничего сказать не могу. а на гигабайте 3455 у меня была нормальная загузка и скорость копирования порядка 80-85 мегабайт. это конечно мало, но все же не 3

 

тут благородные доны. свои имеются в достатке 😂

уточните плиз, о какой ошибке? 

ну вот эта:

 

[  173.523430] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)

[  173.526949] BUG: unable to handle kernel NULL pointer dereference at           (null)

[  173.535203] IP: [<          (null)>]           (null)

  • Thanks 1
Link to post
Share on other sites
44 минуты назад, TeleDDim сказал:

вы там затрите серийник свой  и мак, прошу прощения что не предупредил (

серийник не мой google подсказал, а мак измененный, не существует такого. Спасибо за предупреждение, убрал.

Edited by deloza
Link to post
Share on other sites
5 часов назад, deloza сказал:

вынужден Вас огорчить

Печалька, однако. У буржуинов тоже не вышло. У меня мыслей, кроме как о том, что дело в кривизне биоса не осталось...

Скрытый текст

[  174.332084] [<ffffffffa0676480>] intel_ddi_init+0x2d0/0x4f0 [i915]

[  174.338739] [<ffffffffa0654537>] intel_modeset_init+0x15e7/0x1a70 [i915]

[  174.345913] [<ffffffffa068e507>] ? intel_setup_gmbus+0x2e7/0x310 [i915]

[  174.353010] [<ffffffffa05c9ccf>] i915_driver_load+0xa0f/0xe00 [i915]

[  174.359840] [<ffffffffa05d4797>] i915_pci_probe+0x27/0x40 [i915]

P.S.

Скрытый текст

[   15.472556] Linux agpgart interface v0.103
[   15.513294] i915 0000:00:02.0: enabling device (0000 -> 0003)
[   15.513488] [drm] VT-d active for gfx access
[   15.518104] [drm] DMAR active, disabling use of stolen memory
[   15.518555] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.518556] [drm] Driver supports precise vblank timestamp query.
[   15.518736] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[   15.548248] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0

 

Edited by Olegin
Link to post
Share on other sites
2 hours ago, Kizilkum said:

похоже на то. ну у Вас есть еще не спортивный вариант )))

дыа ) но я пока такой план наметил: 

прошить последнюю прошивку для этого адапетра и попробовать  1.04 ещё раз ))

2 hours ago, Olegin said:

Чет, похоже agpgart тупит, он тоже за видюху отвечает...

ну если смотреть на лог, то первой идёт вот такая процедура  i2c_transfer+0x79/0x90

Она я так понимаю в модуле i2c, а не  agppart. Этот адаптер HDMI как раз так и управляется через i2c. И с ним под виндой косяки тоже, так что может прошивка спасет ))

Но чтоб прошить надо поставить винду 10 - я попробовал PE загрузить, там дрова нормально не встают для этого ) Вобщем, наши руки не для скуки ))

  • Thanks 1
Link to post
Share on other sites
15 hours ago, Olegin said:

P.S.

Интересно, а если всё же отключить монитор принудительно в модуле i915? по идее вылетает то всё уже после того как он загрузился и загрузил прошивку(firmware)?

Для этого надо в Grub вписать параметр i915.disable_display=true

Но вот вопрос куда писать, в set extra_args_918='' или set common_args_918='', по идее в common так как i915 прописан в OPTIONAL_MODULES, а не в  EXTRA_MODULES, хотя для верности можно и туда и туда )))

 

Edited by TeleDDim
Link to post
Share on other sites

@Olegin дык я 3617 поставил и живу так )) вчера чистый хард засунул, сегодня сделаю флешку новую с 1.04 для тестов )) удаленно пока нечего править, просто по факту хватает сейчас и 3617 всё работает, и трогать не охота )) кстати, в биосе получается нельзя хард отключить, ну тот где 3617, надо вытаскивать каждый раз?

Link to post
Share on other sites
  • XPEH locked this topic
  • XPEH unlocked this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.