TeleDDim

Аппаратный транскодинг на Asrock J4205-ITX

Recommended Posts

Posted (edited)

HPET выключил, ничего интересного не увидел, ни в логах, ни в скорости. Включил обратно.

Жена уже убьет скоро, две недели как помешанный бегаю по квартире с этой коробкой.

 

Скрытый текст

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-6FFFF write-back
[    0.000000]   70000-7FFFF uncachable
[    0.000000]   80000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B000000 mask 7FFF000000 uncachable
[    0.000000]   3 base 0100000000 mask 7F00000000 write-back
[    0.000000]   4 base 0200000000 mask 7F80000000 write-back
[    0.000000]   5 base 00FF800000 mask 7FFF800000 write-combining
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 28672
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x01a01000, 0x01a01fff] PGTABLE
[    0.000000] BRK [0x01a02000, 0x01a02fff] PGTABLE
[    0.000000] BRK [0x01a03000, 0x01a03fff] PGTABLE
[    0.000000] BRK [0x01a04000, 0x01a04fff] PGTABLE
[    0.000000] BRK [0x01a05000, 0x01a05fff] PGTABLE
[    0.000000] BRK [0x01a06000, 0x01a06fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x367d0000-0x37ffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000799CC0C0 0000DC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000799D5200 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000799CC240 008FB3 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000799E8080 000040
[    0.000000] ACPI: FPDT 0x00000000799D5320 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000799D5370 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000799D5410 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: DBG2 0x00000000799D5450 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: DBGP 0x00000000799D54D0 000034 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: HPET 0x00000000799D5510 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: LPIT 0x00000000799D5550 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: APIC 0x00000000799D55B0 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: NPKT 0x00000000799D5640 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: PRAM 0x00000000799D56B0 000030 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: WSMT 0x00000000799D56E0 000028 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x00000000799D5710 000B53 (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
[    0.000000] ACPI: SSDT 0x00000000799D6270 0016E9 (v01 Intel_ Platform 00001000 INTL 20120913)
[    0.000000] ACPI: AAFT 0x00000000799D7960 0002DA (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000799D7C40 000442 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000799D8090 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000799D87C0 00032D (v02 PmRef  Cpu0Tst  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000799D8AF0 00017C (v02 PmRef  ApTst    00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000799D8C70 002760 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000799DB3D0 000042 (v01 ALASKA A M I    00000000      00000000)
[    0.000000] ACPI: DMAR 0x00000000799DB420 0000A8 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
[    0.000000] ACPI: WDAT 0x00000000799DB4D0 000104 (v01                 00000000      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000012151000-0x00000000774d5fff]
[    0.000000]   node   0: [mem 0x00000000795f4000-0x00000000796c4fff]
[    0.000000]   node   0: [mem 0x0000000079de3000-0x000000007a155fff]
[    0.000000]   node   0: [mem 0x000000007a181000-0x000000007a756fff]
[    0.000000]   node   0: [mem 0x000000007a759000-0x000000007affffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[    0.000000] On node 0 totalpages: 2057696
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7514 pages used for memmap
[    0.000000]   DMA32 zone: 480838 pages, LIFO batch:31
[    0.000000]   Normal zone: 24576 pages used for memmap
[    0.000000]   Normal zone: 1572864 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x7c000000-0x7fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[    0.000000] PM: Registered nosave memory: [mem 0x774d6000-0x795f3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x796c5000-0x799e8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x799e9000-0x79de2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a156000-0x7a156fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a157000-0x7a180fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a757000-0x7a758fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xcfffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff88027fc00000 s87384 r8192 d31400 u524288
[    0.000000] pcpu-alloc: s87384 r8192 d31400 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2025520
[    0.000000] Kernel command line: syno_hdd_powerup_seq=1 HddHotplug=0 syno_hw_version=DS918+ vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_hdd_detect=0 syno_port_thaw=1 root=/dev/md0
[    0.000000] Power on seq num: 1
[    0.000000] Synology Hardware Version: DS918+
[    0.000000] Vender format version: 2
[    0.000000] SYNO GPIO hdd detect pin: 0 
[    0.000000] Serial Number: 
[    0.000000] Mac1: 
[    0.000000] Mac2: 
[    0.000000] Internal netif num: 2
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Memory: 7985576K/8230784K available (5548K kernel code, 474K rwdata, 1820K rodata, 852K init, 684K bss, 245208K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: PIT calibration matches HPET. 1 loops
[    0.000000] tsc: Detected 1497.646 MHz processor
[    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2995.29 BogoMIPS (lpj=1497646)
[    0.000008] pid_max: default: 32768 minimum: 301
[    0.000016] ACPI: Core revision 20150930
[    0.012980] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.013009] Security Framework initialized
[    0.013017] AppArmor: AppArmor initialized
[    0.013033] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013036] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013336] Initializing cgroup subsys io
[    0.013343] Initializing cgroup subsys memory
[    0.013352] Initializing cgroup subsys devices
[    0.013355] Initializing cgroup subsys freezer
[    0.013422] CPU: Physical Processor ID: 0
[    0.013424] CPU: Processor Core ID: 0
[    0.025059] mce: CPU supports 7 MCE banks
[    0.025132] CPU0: Thermal monitoring enabled (TM1)
[    0.025180] process: using mwait in idle threads
[    0.025184] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.025186] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.025189] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
[    0.027685] Freeing SMP alternatives memory: 28K (ffffffff8194d000 - ffffffff81954000)
[    0.032147] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.042162] TSC deadline timer enabled
[    0.042171] smpboot: CPU0: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz (family: 0x6, model: 0x5c, stepping: 0x9)
[    0.042191] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
[    0.042199] ... version:                4
[    0.042200] ... bit width:              48
[    0.042201] ... generic registers:      4
[    0.042203] ... value mask:             0000ffffffffffff
[    0.042204] ... max period:             00007fffffffffff
[    0.042205] ... fixed-purpose events:   3
[    0.042207] ... event mask:             000000070000000f
[    0.051234] x86: Booting SMP configuration:
[    0.051237] .... node  #0, CPUs:      #1
[    0.065418] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.068302]  #2 #3
[    0.099334] x86: Booted up 1 node, 4 CPUs
[    0.099337] smpboot: Total of 4 processors activated (11981.16 BogoMIPS)
[    0.101632] devtmpfs: initialized
[    0.102040] PM: Registering ACPI NVS region [mem 0x796c5000-0x799e8fff] (3293184 bytes)
[    0.102109] PM: Registering ACPI NVS region [mem 0x7a156000-0x7a156fff] (4096 bytes)
[    0.102195] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.102202] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.103702] xor: measuring software checksum speed
[    0.113663]    prefetch64-sse: 11440.000 MB/sec
[    0.123686]    generic_sse:  9852.000 MB/sec
[    0.123688] xor: using function: prefetch64-sse (11440.000 MB/sec)
[    0.123722] pinctrl core: initialized pinctrl subsystem
[    0.124044] NET: Registered protocol family 16
[    0.130717] cpuidle: using governor ladder
[    0.134728] cpuidle: using governor menu
[    0.134853] ACPI: bus type PCI registered
[    0.134949] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.134954] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.134975] PCI: Using configuration type 1 for base access
[    0.163828] raid6: sse2x1   gen()  5046 MB/s
[    0.180864] raid6: sse2x1   xor()  2873 MB/s
[    0.197903] raid6: sse2x2   gen()  5488 MB/s
[    0.214938] raid6: sse2x2   xor()  3462 MB/s
[    0.231969] raid6: sse2x4   gen()  6281 MB/s
[    0.249001] raid6: sse2x4   xor()  2732 MB/s
[    0.249003] raid6: using algorithm sse2x4 gen() 6281 MB/s
[    0.249004] raid6: .... xor() 2732 MB/s, rmw enabled
[    0.249006] raid6: using ssse3x2 recovery algorithm
[    0.249071] ACPI: Added _OSI(Module Device)
[    0.249073] ACPI: Added _OSI(Processor Device)
[    0.249074] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.249076] ACPI: Added _OSI(Processor Aggregator Device)
[    0.254791] ACPI: Executed 3 blocks of module-level executable AML code
[    0.260518] ACPI: Dynamic OEM Table Load:
[    0.260526] ACPI: SSDT 0xFFFF8802762B5000 00015F (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.262256] ACPI: Interpreter enabled
[    0.262280] ACPI: (supports S0 S4 S5)
[    0.262282] ACPI: Using IOAPIC for interrupt routing
[    0.262392] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.278181] ACPI: Power Resource [FN00] (on)
[    0.279197] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.279206] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
[    0.279306] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.279513] PCI host bridge to bus 0000:00
[    0.279517] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.279520] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.279523] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.279525] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.279528] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.279530] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.279532] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.279535] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[    0.279537] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
[    0.279540] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
[    0.279542] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[    0.279545] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.279560] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[    0.279946] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
[    0.279969] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.279979] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.279987] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.280384] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[    0.280432] pci 0000:00:0f.0: reg 0x10: [mem 0x91317000-0x91317fff 64bit]
[    0.280525] pci 0000:00:0f.0: PME# supported from D3hot
[    0.280838] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[    0.280862] pci 0000:00:12.0: reg 0x10: [mem 0x91310000-0x91311fff]
[    0.280870] pci 0000:00:12.0: reg 0x14: [mem 0x91314000-0x913140ff]
[    0.280879] pci 0000:00:12.0: reg 0x18: [io  0xf090-0xf097]
[    0.280887] pci 0000:00:12.0: reg 0x1c: [io  0xf080-0xf083]
[    0.280896] pci 0000:00:12.0: reg 0x20: [io  0xf060-0xf07f]
[    0.280905] pci 0000:00:12.0: reg 0x24: [mem 0x91313000-0x913137ff]
[    0.280940] pci 0000:00:12.0: PME# supported from D3hot
[    0.281241] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
[    0.281306] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[    0.281551] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.281607] pci 0000:00:13.1: [8086:5ad9] type 01 class 0x060400
[    0.281673] pci 0000:00:13.1: PME# supported from D0 D3hot D3cold
[    0.281915] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.281968] pci 0000:00:13.2: [8086:5ada] type 01 class 0x060400
[    0.282035] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
[    0.282290] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.282344] pci 0000:00:13.3: [8086:5adb] type 01 class 0x060400
[    0.282409] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[    0.282654] pci 0000:00:13.3: System wakeup disabled by ACPI
[    0.282728] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[    0.282760] pci 0000:00:15.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit]
[    0.282820] pci 0000:00:15.0: PME# supported from D3hot D3cold
[    0.283075] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.283199] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[    0.283602] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[    0.283663] pci 0000:00:1f.1: reg 0x10: [mem 0x91312000-0x913120ff 64bit]
[    0.283738] pci 0000:00:1f.1: reg 0x20: [io  0xf040-0xf05f]
[    0.284165] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.284211] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.284239] pci 0000:01:00.0: reg 0x18: [mem 0x91204000-0x91204fff 64bit]
[    0.284255] pci 0000:01:00.0: reg 0x20: [mem 0x91200000-0x91203fff 64bit pref]
[    0.284272] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.284347] pci 0000:01:00.0: supports D1 D2
[    0.284350] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.284415] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.284461] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.284466] pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
[    0.284470] pci 0000:00:13.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.284519] pci 0000:00:13.1: PCI bridge to [bus 02]
[    0.284587] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
[    0.284616] pci 0000:03:00.0: reg 0x10: [io  0xd050-0xd057]
[    0.284627] pci 0000:03:00.0: reg 0x14: [io  0xd040-0xd043]
[    0.284639] pci 0000:03:00.0: reg 0x18: [io  0xd030-0xd037]
[    0.284650] pci 0000:03:00.0: reg 0x1c: [io  0xd020-0xd023]
[    0.284661] pci 0000:03:00.0: reg 0x20: [io  0xd000-0xd01f]
[    0.284672] pci 0000:03:00.0: reg 0x24: [mem 0x91100000-0x911001ff]
[    0.284758] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.284804] pci 0000:00:13.2: PCI bridge to [bus 03]
[    0.284808] pci 0000:00:13.2:   bridge window [io  0xd000-0xdfff]
[    0.284813] pci 0000:00:13.2:   bridge window [mem 0x91100000-0x911fffff]
[    0.284888] pci 0000:04:00.0: [8086:10d3] type 00 class 0x020000
[    0.284946] pci 0000:04:00.0: reg 0x10: [mem 0x910c0000-0x910dffff]
[    0.284963] pci 0000:04:00.0: reg 0x14: [mem 0x91000000-0x9107ffff]
[    0.284981] pci 0000:04:00.0: reg 0x18: [io  0xc000-0xc01f]
[    0.284999] pci 0000:04:00.0: reg 0x1c: [mem 0x910e0000-0x910e3fff]
[    0.285047] pci 0000:04:00.0: reg 0x30: [mem 0x91080000-0x910bffff pref]
[    0.285120] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.285193] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.285237] pci 0000:00:13.3: PCI bridge to [bus 04]
[    0.285242] pci 0000:00:13.3:   bridge window [io  0xc000-0xcfff]
[    0.285246] pci 0000:00:13.3:   bridge window [mem 0x91000000-0x910fffff]
[    0.285268] pci_bus 0000:00: on NUMA node 0
[    0.286762] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.286853] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.286941] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.287028] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.287116] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.287214] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.287301] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.287388] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
[    0.289011] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.289232] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.289235] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.289241] vgaarb: loaded
[    0.289242] vgaarb: bridge control possible 0000:00:02.0
[    0.289348] SCSI subsystem initialized
[    0.290231] libata version 3.00 loaded.
[    0.290291] pps_core: LinuxPPS API ver. 1 registered
[    0.290293] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.290302] PTP clock support registered
[    0.290408] PCI: Using ACPI for IRQ routing
[    0.318729] PCI: pci_cache_line_size set to 64 bytes
[    0.318804] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
[    0.318807] e820: reserve RAM buffer [mem 0x774d6000-0x77ffffff]
[    0.318809] e820: reserve RAM buffer [mem 0x796c5000-0x7bffffff]
[    0.318811] e820: reserve RAM buffer [mem 0x7a156000-0x7bffffff]
[    0.318813] e820: reserve RAM buffer [mem 0x7a757000-0x7bffffff]
[    0.318815] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[    0.320118] clocksource: Switched to clocksource hpet
[    0.320259] AppArmor: AppArmor Filesystem Enabled
[    0.320292] pnp: PnP ACPI init
[    0.320711] system 00:00: [io  0x0280-0x028f] has been reserved
[    0.320714] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.320717] system 00:00: [io  0x02a0-0x02af] has been reserved
[    0.320723] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.321055] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.321814] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.321818] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.321821] system 00:02: [io  0x0500-0x05fe] has been reserved
[    0.321825] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.322369] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.322373] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.322376] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.322378] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.322381] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.322384] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.322386] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
[    0.322389] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.322392] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.322396] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.322592] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.322789] pnp: PnP ACPI: found 5 devices
[    0.332956] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.333006] pci 0000:00:13.0: PCI bridge to [bus 01]
[    0.333011] pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
[    0.333017] pci 0000:00:13.0:   bridge window [mem 0x91200000-0x912fffff]
[    0.333025] pci 0000:00:13.1: PCI bridge to [bus 02]
[    0.333034] pci 0000:00:13.2: PCI bridge to [bus 03]
[    0.333037] pci 0000:00:13.2:   bridge window [io  0xd000-0xdfff]
[    0.333042] pci 0000:00:13.2:   bridge window [mem 0x91100000-0x911fffff]
[    0.333050] pci 0000:00:13.3: PCI bridge to [bus 04]
[    0.333053] pci 0000:00:13.3:   bridge window [io  0xc000-0xcfff]
[    0.333058] pci 0000:00:13.3:   bridge window [mem 0x91000000-0x910fffff]
[    0.333066] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.333068] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.333071] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.333073] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.333076] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.333078] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.333081] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.333083] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[    0.333086] pci_bus 0000:00: resource 12 [mem 0x7b800001-0x7bffffff window]
[    0.333088] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
[    0.333091] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
[    0.333093] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.333174] pci_bus 0000:01: resource 1 [mem 0x91200000-0x912fffff]
[    0.333177] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.333179] pci_bus 0000:03: resource 1 [mem 0x91100000-0x911fffff]
[    0.333181] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    0.333183] pci_bus 0000:04: resource 1 [mem 0x91000000-0x910fffff]
[    0.333238] mce: [Hardware Error]: Machine check events logged
[    0.333316] NET: Registered protocol family 2
[    0.333601] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.333816] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.334274] TCP: Hash tables configured (established 65536 bind 65536)
[    0.334326] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.334391] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.334594] NET: Registered protocol family 1
[    4.072210] RPC: Registered named UNIX socket transport module.
[    4.072213] RPC: Registered udp transport module.
[    4.072214] RPC: Registered tcp transport module.
[    4.072216] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.072233] pci 0000:00:02.0: Video device with shadowed ROM
[    4.072611] PCI: CLS 0 bytes, default 64
[    4.072688] Trying to unpack rootfs image as initramfs...
[    4.730809] Freeing initrd memory: 24768K (ffff8800367d0000 - ffff880038000000)
[    4.731252] t: module verification failed: signature and/or required key missing - tainting kernel
[    4.755295] DMAR: Host address width 39
[    4.755301] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[    4.755322] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    4.755324] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[    4.755336] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[    4.755339] DMAR: RMRR base: 0x000000795b9000 end: 0x000000795d8fff
[    4.755342] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    4.755356] DMAR: No ATSR found
[    4.755547] DMAR: dmar0: Using Queued invalidation
[    4.755560] DMAR: dmar1: Using Queued invalidation
[    4.755655] DMAR: Setting RMRR:
[    4.755682] DMAR: Setting identity map for device 0000:00:02.0 [0x7b800000 - 0x7fffffff]
[    4.755702] DMAR: Setting identity map for device 0000:00:15.0 [0x795b9000 - 0x795d8fff]
[    4.755712] DMAR: Prepare 0-16MiB unity mapping for LPC
[    4.755721] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    4.755791] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    4.755905] iommu: Adding device 0000:00:00.0 to group 0
[    4.755919] iommu: Adding device 0000:00:02.0 to group 1
[    4.755934] iommu: Adding device 0000:00:0f.0 to group 2
[    4.755947] iommu: Adding device 0000:00:12.0 to group 3
[    4.756044] iommu: Adding device 0000:00:13.0 to group 4
[    4.756060] iommu: Adding device 0000:00:13.1 to group 4
[    4.756076] iommu: Adding device 0000:00:13.2 to group 4
[    4.756094] iommu: Adding device 0000:00:13.3 to group 4
[    4.756109] iommu: Adding device 0000:00:15.0 to group 5
[    4.756125] iommu: Adding device 0000:00:1f.0 to group 6
[    4.756136] iommu: Adding device 0000:00:1f.1 to group 6
[    4.756147] iommu: Adding device 0000:01:00.0 to group 4
[    4.756157] iommu: Adding device 0000:03:00.0 to group 4
[    4.756169] iommu: Adding device 0000:04:00.0 to group 4
[    4.759867] audit: initializing netlink subsys (disabled)
[    4.759893] audit: type=2000 audit(1551874688.719:1): initialized
[    4.760158] Initialise system trusted keyring
[    4.769891] VFS: Disk quotas dquot_6.6.0
[    4.769917] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.778386] NFS: Registering the id_resolver key type
[    4.778412] Key type id_resolver registered
[    4.778414] Key type id_legacy registered
[    4.800161] async_tx: api initialized (async)
[    4.800172] Key type asymmetric registered
[    4.800176] Asymmetric key parser 'x509' registered
[    4.800245] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    4.800251] io scheduler noop registered
[    4.800254] io scheduler deadline registered
[    4.800277] io scheduler cfq registered (default)
[    5.044204] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    5.051892] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 8250
[    5.052298] console [ttyS0] enabled
[    5.758998] tsc: Refined TSC clocksource calibration: 1497.601 MHz
[    5.759004] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1596484d3e3, max_idle_ns: 440795208498 ns
[   12.085886] clocksource: Switched to clocksource tsc
[   12.091959] brd: module loaded
[   12.092041] Loading iSCSI transport class v2.0-870.
[   12.110128] ahci 0000:00:12.0: version 3.0
[   12.110432] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[   12.110437] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum part deso sadm sds apst 
[   12.136378] scsi host0: ahci
[   12.158649] scsi host1: ahci
[   12.158774] ata1: SATA max UDMA/133 abar m2048@0x91313000 port 0x91313100 irq 367
[   12.158779] ata2: SATA max UDMA/133 abar m2048@0x91313000 port 0x91313180 irq 367
[   12.618762] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   12.758900] ata1.00: ATA-9: WDC WD20PURZ-85GU6Y0, 80.00A80, max UDMA/133
[   12.758904] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   12.759492] ata1.00: configured for UDMA/133
[   15.742663] scsi 0:0:0:0: Direct-Access     WDC      WD20PURZ-85GU6Y0         0A80 PQ: 0 ANSI: 5
[   16.742965] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[   16.742972] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   16.743040] sd 0:0:0:0: [sda] Write Protect is off
[   16.743044] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.743074] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.754954]  sda: sda1 sda2 sda3
[   16.755403] sd 0:0:0:0: [sda] Attached SCSI disk
[   17.202621] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   17.742657] ata2.00: ATA-9: WDC WD20PURX-64P6ZY0, 80.00A80, max UDMA/133
[   17.742661] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   17.743218] ata2.00: configured for UDMA/133
[   19.739572] scsi 1:0:0:0: Direct-Access     WDC      WD20PURX-64P6ZY0         0A80 PQ: 0 ANSI: 5
[   20.742819] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[   20.742823] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   20.742878] sd 1:0:0:0: [sdb] Write Protect is off
[   20.742882] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   20.742907] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.743383] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
[   20.743421] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[   20.743424] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc 
[   20.747163] scsi host2: ahci
[   20.750255] scsi host3: ahci
[   20.750366] ata3: SATA max UDMA/133 abar m512@0x91100000 port 0x91100100 irq 368
[   20.750370] ata4: SATA max UDMA/133 abar m512@0x91100000 port 0x91100180 irq 368
[   20.757846]  sdb: sdb1 sdb2 sdb3
[   20.758418] sd 1:0:0:0: [sdb] Attached SCSI disk
[   21.209506] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   21.210399] ata3.00: ATA-8: WDC WD10EZRX-00A8LB0, 01.01A01, max UDMA/133
[   21.210402] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[   21.211287] ata3.00: configured for UDMA/133
[   21.742489] scsi 2:0:0:0: Direct-Access     WDC      WD10EZRX-00A8LB0         1A01 PQ: 0 ANSI: 5
[   22.742705] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[   22.742709] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[   22.742775] sd 2:0:0:0: [sdc] Write Protect is off
[   22.742779] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   22.742808] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.763454]  sdc: sdc1 sdc2 sdc3
[   23.763889] sd 2:0:0:0: [sdc] Attached SCSI disk
[   24.047421] ata4: SATA link down (SStatus 0 SControl 300)
[   24.047427] ata4: No present pin info for SATA link down event
[   24.047930] i8042: PNP: No PS/2 controller found. Probing ports directly.
[   24.051385] serio: i8042 KBD port at 0x60,0x64 irq 1
[   24.051400] serio: i8042 AUX port at 0x60,0x64 irq 12
[   24.051449] i2c /dev entries driver
[   24.051658] i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A
[   24.051661] i801_smbus 0000:00:1f.1: PCI INT A: no GSI
[   24.051697] i801_smbus 0000:00:1f.1: SMBus using polling
[   24.052164] md: linear personality registered for level -1
[   24.052169] md: raid0 personality registered for level 0
[   24.052172] md: raid1 personality registered for level 1
[   24.052175] md: raid10 personality registered for level 10
[   24.055217] md: raid6 personality registered for level 6
[   24.055222] md: raid5 personality registered for level 5
[   24.055224] md: raid4 personality registered for level 4
[   24.055330] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   24.055461] NET: Registered protocol family 17
[   24.055513] Key type dns_resolver registered
[   24.056016] registered taskstats version 1
[   24.056023] Loading compiled-in untrusted X.509 certificates
[   24.056027] Loading compiled-in X.509 certificates
[   24.056058] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[   24.057482] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[   24.057531] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[   24.057549] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[   24.057568] page_owner is disabled
[   24.057616] AppArmor: AppArmor sha1 policy hashing enabled
[   24.058942] hctosys: unable to open rtc device (rtc0)
[   24.060156] Freeing unused kernel memory: 852K (ffffffff81878000 - ffffffff8194d000)
[   24.060161] Write protecting the kernel read-only data: 8192k
[   24.060524] Freeing unused kernel memory: 584K (ffff88000156e000 - ffff880001600000)
[   24.061289] Freeing unused kernel memory: 228K (ffff8800017c7000 - ffff880001800000)
[   32.189617] ACPI: bus type USB registered
[   32.189657] usbcore: registered new interface driver usbfs
[   32.189671] usbcore: registered new interface driver hub
[   32.189710] usbcore: registered new interface driver ethub
[   32.189735] usbcore: registered new device driver usb
[   32.245934] xhci_hcd 0000:00:15.0: xHCI Host Controller
[   32.245948] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[   32.447113] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109010
[   32.447126] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[   32.447485] hub 1-0:1.0: USB hub found
[   32.447500] hub 1-0:1.0: 8 ports detected
[   32.448458] xhci_hcd 0000:00:15.0: xHCI Host Controller
[   32.448464] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[   32.448496] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   32.449327] hub 2-0:1.0: USB hub found
[   32.449350] hub 2-0:1.0: 7 ports detected
[   32.509858] usbcore: registered new interface driver usb-storage
[   32.567997] VMware PVSCSI driver - version 1.0.5.0-k
[   32.592905] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[   32.614997] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[   32.653232] Fusion MPT base driver 3.04.20
[   32.653237] Copyright (c) 1999-2008 LSI Corporation
[   32.687947] Fusion MPT SPI Host driver 3.04.20
[   32.704026] Fusion MPT misc device (ioctl) driver 3.04.20
[   32.704105] mptctl: Registered with Fusion MPT base driver
[   32.704108] mptctl: /dev/mptctl @ (major,minor=10,220)
[   32.745520] megasas: 06.808.16.00-rc1
[   32.771164] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[   32.794798] mpt3sas version 09.102.00.00 loaded
[   32.825263] rtc_cmos 00:04: RTC can wake from S4
[   32.826176] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[   32.826260] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[   32.855317] apollolake_synobios: module license 'Synology Inc.' taints kernel.
[   32.855322] Disabling lock debugging due to kernel taint
[   32.855902] 2019-3-6 12:18:37 UTC
[   32.855906] synobios: load, major number 201
[   32.855909] Brand: Synology
[   32.855912] Model: DS-918+
[   32.855914] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   32.855919] synobios cpu_arch proc entry initialized
[   32.855921] synobios crypto_hw proc entry initialized
[   32.855923] synobios syno_platform proc entry initialized
[   32.855939] synobios open /dev/ttyS1 success
[   32.865082] synobios: unload
[   32.883389] md: Autodetecting RAID arrays.
[   32.936232] md: invalid raid superblock magic on sda3
[   32.936501] md: sda3 does not have a valid v0.90 superblock, not importing!
[   32.979698] md: invalid raid superblock magic on sdb3
[   32.979963] md: sdb3 does not have a valid v0.90 superblock, not importing!
[   33.026880] md: invalid raid superblock magic on sdc3
[   33.027154] md: sdc3 does not have a valid v0.90 superblock, not importing!
[   33.027160] md: Scanned 9 and added 6 devices.
[   33.027161] md: autorun ...
[   33.027163] md: considering sda1 ...
[   33.027168] md:  adding sda1 ...
[   33.027172] md: sda2 has different UUID to sda1
[   33.027175] md:  adding sdb1 ...
[   33.027178] md: sdb2 has different UUID to sda1
[   33.027181] md:  adding sdc1 ...
[   33.027184] md: sdc2 has different UUID to sda1
[   33.027194] md: created md0
[   33.027196] md: bind<sdc1>
[   33.027221] md: bind<sdb1>
[   33.027235] md: bind<sda1>
[   33.027251] md: running: <sda1><sdb1><sdc1>
[   33.733392] usb-storage 1-5:1.0: USB Mass Storage device detected
[   33.744984] md/raid1:md0: active with 3 out of 12 mirrors
[   33.758141] scsi host4: usb-storage 1-5:1.0
[   33.774133] random: nonblocking pool is initialized
[   33.781599] md0: detected capacity change from 0 to 2549940224
[   33.781619] md: considering sda2 ...
[   33.781625] md:  adding sda2 ...
[   33.781629] md:  adding sdb2 ...
[   33.781633] md:  adding sdc2 ...
[   33.830359] md: created md1
[   33.830362] md: bind<sdc2>
[   33.830379] md: bind<sdb2>
[   33.830392] md: bind<sda2>
[   33.830407] md: running: <sda2><sdb2><sdc2>
[   33.834781] md/raid1:md1: active with 3 out of 16 mirrors
[   33.848959] md1: detected capacity change from 0 to 2147418112
[   33.848984] md: ... autorun DONE.
[   33.881122] usb 1-6: new low-speed USB device number 3 using xhci_hcd
[   34.027557] usb 1-6: ep 0x81 - rounding interval to 512 microframes, ep desc says 800 microframes
[   36.736390] scsi 4:0:0:0: Direct-Access              USB Flash Memory         PMAP PQ: 0 ANSI: 6
[   36.736838] sd 4:0:0:0: [synoboot] 15249408 512-byte logical blocks: (7.81 GB/7.27 GiB)
[   36.737102] sd 4:0:0:0: [synoboot] Write Protect is off
[   36.737106] sd 4:0:0:0: [synoboot] Mode Sense: 45 00 00 00
[   36.737356] sd 4:0:0:0: [synoboot] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   37.272079] EXT4-fs (md0): barriers disabled
[   37.288815] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: 
[   37.292930]  synoboot: synoboot1 synoboot2 synoboot3
[   38.999347] sd 4:0:0:0: [synoboot] Attached SCSI removable disk
[   72.272689] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[  101.876618] EXT4-fs (md0): re-mounted. Opts: (null)
[  168.349659] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  168.349711] sd 1:0:0:0: Attached scsi generic sg1 type 0
[  168.349755] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  168.349802] sd 4:0:0:0: Attached scsi generic sg3 type 0
[  168.866297] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k 
[  169.781241] zram: Added device: zram0
[  169.782440] zram: Added device: zram1
[  169.785079] zram: Added device: zram2
[  169.788073] zram: Added device: zram3
[  169.795465] zram0: detected capacity change from 0 to 1240465408
[  169.805789] Adding 1211388k swap on /dev/zram0.  Priority:1 extents:1 across:1211388k SS
[  169.809455] zram1: detected capacity change from 0 to 1240465408
[  169.821334] Adding 1211388k swap on /dev/zram1.  Priority:1 extents:1 across:1211388k SS
[  169.825422] zram2: detected capacity change from 0 to 1240465408
[  169.835711] Adding 1211388k swap on /dev/zram2.  Priority:1 extents:1 across:1211388k SS
[  169.838712] zram3: detected capacity change from 0 to 1240465408
[  169.847856] Adding 1211388k swap on /dev/zram3.  Priority:1 extents:1 across:1211388k SS
[  216.426773] NET: Registered protocol family 10
[  216.479756] sit: IPv6 over IPv4 tunneling driver
[  217.007880] init: syno-auth-check main process (5438) killed by TERM signal
[  218.436156] systemd-udevd[5656]: starting version 204
[  219.590353] SSE version of gcm_enc/dec engaged.
[  219.642602] fuse init (API version 7.23)
[  219.701922] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[  219.701928] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[  219.702287] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[  219.806496] e1000e 0000:04:00.0 eth0: registered PHC clock
[  219.806522] e1000e 0000:04:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:05:ca:0e:e7:e8
[  219.806525] e1000e 0000:04:00.0 eth0: Intel(R) PRO/1000 Network Connection
[  219.806568] e1000e 0000:04:00.0 eth0: MAC: 3, PHY: 8, PBA No: G17304-005
[  219.807729] usb 1-6: ep 0x81 - rounding interval to 512 microframes, ep desc says 800 microframes
[  219.833702] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[  219.833707] igb: Copyright (c) 2007-2014 Intel Corporation.
[  219.844231] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[  219.844237] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[  219.857450] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[  219.878601] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[  219.878611] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com> 
                This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 
                This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 
[  220.038315] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[  220.038326] ACPI: Power Button [PWRB]
[  220.080691] Linux agpgart interface v0.103
[  220.149839] [drm] Initialized drm 1.1.0 20060810
[  220.279403] [drm] Memory usable by graphics device = 4096M
[  220.279408] [drm] VT-d active for gfx access
[  220.281053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[  220.281056] [drm] Driver supports precise vblank timestamp query.
[  220.292506] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[  220.295248] [drm] Finished loading i915/bxt_dmc_ver1_07.bin (v1.7)
[  220.296548] [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled
[  221.274573] [drm] failed to retrieve link info, disabling eDP
[  221.408837] [drm] GuC firmware load skipped
[  221.413253] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[  221.415176] acpi device:10: registered as cooling_device4
[  221.415645] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[  221.415916] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[  221.432806] i915 0000:00:02.0: No connectors reported connected with modes
[  221.432817] [drm] Cannot find any crtc or sizes - going 1024x768
[  221.434173] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[  222.317653] Btrfs loaded, crc32c=crc32c-intel
[  222.333270] exFAT: Version 1.2.9
[  222.402483] jme: JMicron JMC2XX ethernet driver version 1.0.8
[  222.414551] sky2: driver version 1.30
[  222.436012] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.63
[  222.448667] QLogic/NetXen Network Driver v4.0.82
[  222.456090] Solarflare NET driver v4.0
[  222.463683] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[  222.463688] e1000: Copyright (c) 1999-2006 Intel Corporation.
[  222.470478] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[  222.476596] VMware vmxnet3 virtual NIC driver - version 1.4.5.0-k-NAPI
[  222.497620] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[  222.532529] usbcore: registered new interface driver ax88179_178a
[  222.613477] 2019-3-6 12:21:46 UTC
[  222.613484] synobios: load, major number 201
[  222.613488] Brand: Synology
[  222.613491] Model: DS-918+
[  222.613493] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[  222.613497] synobios cpu_arch proc entry initialized
[  222.613499] synobios crypto_hw proc entry initialized
[  222.613501] synobios syno_platform proc entry initialized
[  222.613517] synobios open /dev/ttyS1 success
[  222.670855] e1000e 0000:04:00.0 eth2: renamed from eth0
[  222.674803] r8168 0000:01:00.0 eth0: renamed from eth1
[  222.681808] e1000e 0000:04:00.0 eth1: renamed from eth2
[  222.733383] [drm] RC6 on
[  230.745959] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[  232.099864] gre: GRE over IPv4 demultiplexor driver
[  232.117361] openvswitch: Open vSwitch switching datapath
[  236.618497] device ovs-system entered promiscuous mode
[  236.644586] device ovs_eth0 entered promiscuous mode
[  236.644905] device eth0 entered promiscuous mode
[  236.645160] device eth1 entered promiscuous mode
[  236.648257] device ovs_eth1 entered promiscuous mode
[  242.958379] device ovs_eth0 left promiscuous mode
[  242.969283] device eth0 left promiscuous mode
[  242.982431] device ovs_eth0 entered promiscuous mode
[  243.049158] eth0: 0xffffc9000203e000, 00:11:32:7e:ed:87, IRQ 373
[  243.117119] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  243.124031] device eth0 entered promiscuous mode
[  243.258562] usb 1-6: ep 0x81 - rounding interval to 512 microframes, ep desc says 800 microframes
[  243.649803] ip_tables: (C) 2000-2006 Netfilter Core Team
[  243.755240] device eth1 left promiscuous mode
[  243.755336] device ovs_eth1 left promiscuous mode
[  243.776168] device ovs_eth1 entered promiscuous mode
[  243.860813] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  243.892436] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  243.900376] device eth1 entered promiscuous mode
[  246.138092] r8168: eth0: link up
[  246.242071] md: md3 stopped.
[  246.243144] md: bind<sdc3>
[  246.256059] md/raid1:md3: active with 1 out of 1 mirrors
[  246.277709] md3: detected capacity change from 0 to 995267117056
[  246.286703] md: md2 stopped.
[  246.315200] md: bind<sdb3>
[  246.315346] md: bind<sda3>
[  246.320777] md/raid1:md2: active with 2 out of 2 mirrors
[  246.343623] md2: detected capacity change from 0 to 1995461165056
[  249.860628] BTRFS: device label 2019.03.05-03:16:37 v23824 devid 1 transid 903 /dev/md3
[  249.862621] BTRFS info (device md3): enabling auto syno reclaim space
[  249.862629] BTRFS info (device md3): using free space tree
[  249.862631] BTRFS info (device md3): has skinny extents
[  250.061558] BTRFS: device label 2018.09.16-06:08:58 v15284 devid 1 transid 340333 /dev/md2
[  250.110722] BTRFS info (device md2): enabling auto syno reclaim space
[  250.110732] BTRFS info (device md2): has skinny extents

 

Edited by Sh_Renat
dmesg

Share this post


Link to post
Share on other sites
Just now, Sh_Renat said:

Жена уже убьет скоро, две недели как помешанный бегаю по квартире с этой коробкой.

знакомо)) я же говорю - если работает, лучше не трогать уже )) 

Share this post


Link to post
Share on other sites
Цитата

[   38.999347] sd 4:0:0:0: [synoboot] Attached SCSI removable disk
[   72.272689] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[  101.876618] EXT4-fs (md0): re-mounted. Opts: (null)
[  168.349659] sd 0:0:0:0: Attached scsi generic sg0 type 0

 

Здесь не особо понятно, скачки времени

Share this post


Link to post
Share on other sites

Откатил биос на 1.30, настроил биос, установил 916, переехал на 918 результат "фризы" 😡

Похоже от настроек биоса ничего не зависит .. 

Share this post


Link to post
Share on other sites
18 часов назад, Sh_Renat сказал:

Еще заметил что на встроенной сетевой карте сервак загружается минуту дольше чем на внешней Intel.

Что за карту используете?

Share this post


Link to post
Share on other sites
Posted (edited)
1 час назад, use-nas сказал:

Что за карту используете?

Скрытый текст

[  219.701922] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[  219.701928] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[  219.702287] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[  219.806496] e1000e 0000:04:00.0 eth0: registered PHC clock
[  219.806522] e1000e 0000:04:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:05:ca:0e:e7:e8
[  219.806525] e1000e 0000:04:00.0 eth0: Intel(R) PRO/1000 Network Connection
[  219.806568] e1000e 0000:04:00.0 eth0: MAC: 3, PHY: 8, PBA No: G17304-005

От сетевой не зависит, сейчас использую внутреннюю. Странно, что могло произойти такого что у меня работает?

В CSM отключил видео?

Можно попробовать заменить папку модулей ядра /lib/modules на мою. Но если с правами будут проблемы, то сервак не загрузится.

Ссылка на модули

Есть еще более отчаянный шаг, заменить всю папку /usr/lib

Ссылка на всю папку /usr/lib

Манипуляцию лучше делать через MC под sudo -i, предварительно распаковав в FileStation. 

Скинь лог dmesg

Edited by Sh_Renat
Сетевая

Share this post


Link to post
Share on other sites
1 час назад, Sh_Renat сказал:

От сетевой не зависит, сейчас использую внутреннюю.

Есть желание прикупить интеловскую сетевуху для дальнейших обновлений 3615, если 918 не заведется. Какая модель у вас?

 

1 час назад, Sh_Renat сказал:

Скинь лог dmesg

Вечером скину.

А настройки grub.cfg у вас стандартные??

Share this post


Link to post
Share on other sites
1 минуту назад, use-nas сказал:

Есть желание прикупить интеловскую сетевуху для дальнейших обновлений 3615, если 918 не заведется. Какая модель у вас?

 

Вечером скину.

А настройки grub.cfg у вас стандартные??

grub стандартный. 

Сетевая на чипе Intel 82574L, древняя. На работе валялась.

Хотел такую заказать, но подвернулась другая 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.