Jump to content
XPEnology Community
  • 0

Completly lost


MCFLY78

Question

10 answers to this question

Recommended Posts

  • 0

i just boot on my computer ( on the first computer i am stuck with booting on usb so i change the computer but i have a new problem .... with the key

 i now have

Intro :

this mod is brought to you by Jun ......

Screen will stop updating shortly

please open synology ass or http://

 

On another computer i launch syno assistant but i only see my real nas . i have replaced the extra ramdiisk on the key with osmount but still not finding my Lenovo THincentre computer

Edited by MCFLY78
Link to comment
Share on other sites

  • 0

The "updated tutorial" is the one I was linking to, and it explains, step by. step, how to install.

Since you are not updating anything, but doing a fresh clean install, your "work" starts at step 3

But DO read the complete thing, to get to know the basics "behind the screen".

And pay closely attention to Note 1.

 

Some questions to you:

 

1 - What bootimage did you download, and was it for 3615/3617/918/xxx?

2 - Did you edit the vid/pid/sn/mac before you wrote it to your usb drive?

3 - On what hardware are you trying to install it?

4 - What make/model is the NIC you are using?

5 - Why did you replace the extra ramdisk, and what file did you replace it with?

6 - What .PAT file did you install ?

7 - Did you install the .PAT automaticly or manual?

 

 

Edited by bearcat
Link to comment
Share on other sites

  • 0

Hello , thanks for your help

1 - What bootimage did you download, and was it for 3615/3617/918/xxx? : 3615

2 - Did you edit the vid/pid/sn/mac before you wrote it to your usb drive? no because as i understand the edition of vid/pid/ is only for update

3 - On what hardware are you trying to install it? i am trying to install on two machines :

Thincentre M81 Celeron and the other is an Athlon X2

 

4 - What make/model is the NIC you are using? DON T know what is NIC and where to find it on the machine

5 - Why did you replace the extra ramdisk, and what file did you replace it with? i thought i did but i have mounted once again the key and it was not replaced

6 - What .PAT file did you install ? i did not use any

7 - Did you install the .PAT automaticly or manual? i tried to find the machine on the network but no way

 

hope it helps you ....

regards

Arnaud

Link to comment
Share on other sites

  • 0

1 - OK, but what is the name of the file you downloaded, and did you use a link from this forum? (1.0

2 - No, you HAVE to edit, even for fresh/clean install.

3 - The M8i should be ok, but AMD support is limited so your Athlon might be less "lucky", what is the mainboard used for it ?

4 - NIC = Network Interface Card, you find it just where your network cable connects ;-) 

5 - Ok, as you have to find the computer before installing.

6 - Ok, as above.

7 - Have your tried searching this forum, or Google, if your hardware actually is compatible?

 

Try the following:

A - Download the "toolbox".

B - Download Jun's loader v1.02b DS3615xs

C - Download DSM 6.1.7 15284 (Chose .pat file for DS3615xs)

D - Find MAC adress of your NIC, write it down.

E - Using the "toolbox", find the vid/pid of your USB drive.

F - Using the "toolbox", generate a serialnumber.

G - Using the "toolbox", edit your grub.cfg with the above data: MAC, vid, pid, and Sn. before saving the changes to you bootimage.

H - Using the "toolbox", write the edited file to your USB drive.

I - Reboot your "NAS" from your freshly made USB bootdrive.

J - Check your routers DHCP server if your "NAS" is getting an IP adress.

K - Using the "toolbox", locate yoru "NAS" with Synology Assistant.

L - Using the Synology Assistant, connect to your "NAS", then manually install the DSM_DS3615xs_15284.pat downloaded earlier.

M - Reboot and enjoy ?

 

Edited by bearcat
Link to comment
Share on other sites

  • 0
3 minutes ago, bearcat said:

i have made 2 boot keys :

first one for the Lenovo Thinkcentre = i used junes loader 1.02b dsm 6.1 = boot ok and machine visible on my network = same key d not work for the M81hp.SO I made another key  WITH 5.2 5967.1 DS3615XS it boots and i can see the nas on my network = for this machine do you think i an update to 6.2 ? what will you do ?

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...