d0n Posted January 6, 2019 Share #51 Posted January 6, 2019 I just edited grub on the usb stick maching my Mac address and wol works fine Gesendet von meinem HTC U11 mit Tapatalk Quote Link to comment Share on other sites More sharing options...
disneysw Posted January 6, 2019 Share #52 Posted January 6, 2019 I should also have mentioned that the way the script is written it only works for physical port eth0. Quote Link to comment Share on other sites More sharing options...
Dire Posted January 6, 2019 Share #53 Posted January 6, 2019 I bought a new network card, but it still looks the same. I found out when the bootloader is running so I don´t have the backlink as if it was turned off. When I switch the system to Windows, the card automatically connects to link. Don´t know where the problem might be ?? Quote Link to comment Share on other sites More sharing options...
bearcat Posted January 6, 2019 Share #54 Posted January 6, 2019 @Dire So, what nic did you buy? Quote Link to comment Share on other sites More sharing options...
Dire Posted January 7, 2019 Share #55 Posted January 7, 2019 (edited) I bought gigabit card with chipset realtek 8111E / 8111F (PCIE) . Edited January 7, 2019 by Dire Quote Link to comment Share on other sites More sharing options...
jarugut Posted January 7, 2019 Share #56 Posted January 7, 2019 (edited) 56 minutes ago, Dire said: I bought gigabit card with chipset realtek 8111E / 8111F (PCIE) . Realtek nic is not supported by DSM6.2.1 version 3615xs. In the forum you can read that the compatible nics are intel. In the following link you will see all ethernet compatible nics: https://www.synology.com/en-global/compatibility?search_by=category&category=network_interface_cards&p=1 Edited January 7, 2019 by jarugut Quote Link to comment Share on other sites More sharing options...
bearcat Posted January 7, 2019 Share #57 Posted January 7, 2019 1 hour ago, Dire said: I bought gigabit card with chipset realtek 8111E / 8111F (PCIE) . There you have your problem... That chipset seems to be unsupported in the newer versions of DSM. The link jargut posted, is partially correct, (for real Synology's) but there are other nic's supported by the current bootloaders, with or without the "extra.lmza" Most, but not all, Gigabit cards based on Intel chipsets works "out of the box" with DSM 6.2.1. I have personally experience with the singleport: Intel Pro 1000CT PCIe Desktop and the dualport HP NC360T (none of them found on the link jargut provided) And you may find them for cheap on ebay Quote Link to comment Share on other sites More sharing options...
pehun Posted January 9, 2019 Share #58 Posted January 9, 2019 Does anybody tried with synology branded 10GB network cards? Quote Link to comment Share on other sites More sharing options...
Dire Posted January 9, 2019 Share #59 Posted January 9, 2019 It is strange that the chipset isn´t supported when the Asrock motherboard on the J1900 has NIC with the chipset Realtek 8111 . It Works bootloader 3615 - 3617 without drivers 'extra.lmza' .That's why I bought this chip set NIC Realtek . Try to buy NIC intel maybe it will work . Quote Link to comment Share on other sites More sharing options...
hoidoi Posted January 9, 2019 Share #60 Posted January 9, 2019 (edited) On 1/7/2019 at 9:57 PM, bearcat said: There you have your problem... That chipset seems to be unsupported in the newer versions of DSM. The link jargut posted, is partially correct, (for real Synology's) but there are other nic's supported by the current bootloaders, with or without the "extra.lmza" Most, but not all, Gigabit cards based on Intel chipsets works "out of the box" with DSM 6.2.1. I have personally experience with the singleport: Intel Pro 1000CT PCIe Desktop and the dualport HP NC360T (none of them found on the link jargut provided) And you may find them for cheap on ebay I known its not an N54L but today i tried Intel 1000 CT Desktop Adapter, but after the Upgrade to 6.2.1 on my Gen10 even this NIC did not work anymore. Do you known the SKU of your card? Found an NC360T on eBay. I give her a try. Edited January 9, 2019 by hoidoi Quote Link to comment Share on other sites More sharing options...
bearcat Posted January 10, 2019 Share #61 Posted January 10, 2019 @hoidoi Thanks for the feedback, sorry to hear of your experience with that nic The nic I have confirmed working in the N54L, was marketed with the SKU : EXPI9301CTBLK and according to the specsheet it's using a 82574L chipset. A friend of mine, who mistakenly was updating from 6.2 to 6.2.1 bought this on my recomendation, and installed it with no problem. The NAS is using Jun's 1.03b DS3615XS bootloader. What is you using? Quote Link to comment Share on other sites More sharing options...
bearcat Posted January 10, 2019 Share #62 Posted January 10, 2019 11 hours ago, Dire said: It is strange that the chipset isn´t supported when the Asrock motherboard on the J1900 has NIC with the chipset Realtek 8111 True, I have a running Asrock Q1900-ITX, allso with a Realtek 8111 family chipset, the RTL8111GR, that worked "out of the box" with Jun's 1.04b 918+ DSM 6.2.1 upd.xx but it seems like the minor differences with last few letters 8111xy makes the difference between failure and success when it comes to DSM 6.2.1. Quote Link to comment Share on other sites More sharing options...
hoidoi Posted January 10, 2019 Share #63 Posted January 10, 2019 31 minutes ago, bearcat said: @hoidoi Thanks for the feedback, sorry to hear of your experience with that nic The nic I have confirmed working in the N54L, was marketed with the SKU : EXPI9301CTBLK and according to the specsheet it's using a 82574L chipset. A friend of mine, who mistakenly was updating from 6.2 to 6.2.1 bought this on my recomendation, and installed it with no problem. The NAS is using Jun's 1.03b DS3615XS bootloader. What is you using? Good Morning bearcat, the nic i have is also an EXPI9301CTBLK. I use 6.2 with Jun's 1.03b DS3617xs. Its not such a great loss, i got this card from a colleague. The HP NC360T should arrive next week, so i will test further, but I have a rising suspicion that there is just some kind of wierd incompatibility between the Gen10 and 6.2.1. For now i am testing my whole collection of boot images (and the Intel 1000 CT) on an H110/Pentium G440. Quote Link to comment Share on other sites More sharing options...
bearcat Posted January 10, 2019 Share #64 Posted January 10, 2019 @hoidoi Thanks for the update. If/when you have the time, could you test your G10 server with 3615 with/without the intel CT nic, to verify if it is the nic's or syno model that is the problem? Quote Link to comment Share on other sites More sharing options...
hoidoi Posted January 10, 2019 Share #65 Posted January 10, 2019 @bearcat The Gen10 is at home now, so i will test it later. But meanwhile I could verify the NIC in my H110/G4400 Testsystem. Loader 1.03b / DS3617xs and Loader 1.04b / 918+ both worked very well. Quote Link to comment Share on other sites More sharing options...
hoidoi Posted January 10, 2019 Share #66 Posted January 10, 2019 11 hours ago, bearcat said: @hoidoi Thanks for the update. If/when you have the time, could you test your G10 server with 3615 with/without the intel CT nic, to verify if it is the nic's or syno model that is the problem? Thank you very much! HP Gen10 & DS3615xs 1.03b & Intel 1000 CT Desktop Adapter let me update to a working DSM 6.2.1. 1 Quote Link to comment Share on other sites More sharing options...
bearcat Posted January 10, 2019 Share #67 Posted January 10, 2019 @hoidoi : I had some free time on my hands and did some "investigations": A: HP N40L, 1.03b DS3615xs DSM 6.1.7-15284 Update 2 with an extra "Intel 1000 CT Desktop Adapter": admin@TempStation:/$ lspci | grep 0200 (look for ethernet adapters) 0000:01:00.0 Class 0200: Device 8086:10d3 (external Intel 82574L Gigabit Ethernet Controller) 0000:04:00.0 Class 0200: Device 14e4:165b (rev 10) (internal HP NC107i based on Broadcom NetXtreme BCM5723) admin@TempStation:/$ ethtool -i eth0 driver: e1000e version: 3.3.4-NAPI firmware-version: 1.8-0 bus-info: 0000:01:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no admin@TempStation:/$ ethtool -i eth1 driver: tg3 version: 3.132 firmware-version: 5723-v3.35 bus-info: 0000:04:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no B: HP N54L, 1.03b DS3615xs DSM 6.2-23739 Update 2 with an extra "HP NC360T" admin@MultiStation:~$ lspci | grep 0200 0000:02:00.0 Class 0200: Device 8086:105e (rev 06) (external HP NC360T based on Intel 82571EB/82571GB Gigabit Ethernet Controller D0/D1 (copper applications)) 0000:02:00.1 Class 0200: Device 8086:105e (rev 06) (as above ) 0000:03:00.0 Class 0200: Device 14e4:165b (rev 10) (internal HP NC107i based on Broadcom NetXtreme BCM5723) admin@MultiStation:~$ ethtool -i eth0 driver: e1000e version: 3.3.4-NAPI firmware-version: 5.6-2 bus-info: 0000:02:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no admin@MultiStation:~$ ethtool -i eth1 driver: e1000e version: 3.3.4-NAPI firmware-version: 5.6-2 bus-info: 0000:02:00.1 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no admin@MultiStation:~$ ethtool -i eth2 driver: tg3 version: 3.132 firmware-version: 5723-v3.35 bus-info: 0000:03:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no 1 Quote Link to comment Share on other sites More sharing options...
hoidoi Posted January 10, 2019 Share #68 Posted January 10, 2019 @bearcat i had some free minutes too: HP Microserver Gen10, 1.03b DS3615xs DSM 6.2.1-23824 Update 4 & deactivated Broadcom internal NIC's & Intel 1000 CT Desktop Adapter: Aleksander@NAS:~$ lspci | grep 0200 0000:02:00.0 Class 0200: Device 8086:10d3 Aleksander@NAS:~$ ethtool -i eth0 driver: e1000e version: 3.3.4-NAPI firmware-version: 1.8-0 bus-info: 0000:02:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no Next step will be activation of the internal Broadcom NIC's because the low profile bracket for the Intel NIC is MIA. I will post the putty outcome. Quote Link to comment Share on other sites More sharing options...
bearcat Posted January 11, 2019 Share #69 Posted January 11, 2019 (edited) @Dire In regards to my Asrock Q1900-ITX, i did the above "check" on my NAS running 1.04b / 918+ 6.2.1 with a Realtek 8111 chip. admin@DS918:/$ lspci | grep 0200 0000:03:00.0 Class 0200: Device 10ec:8168 (rev 11) (according to my Google-skills, the rev.11 define this as the 8111GR, same as Asrock say on their website) admin@DS918:/$ ethtool -i eth0 driver: r8168 (this is the driver DS918+ is using for my card) version: 8.045.08-NAPI firmware-version: bus-info: 0000:03:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: no Edited January 11, 2019 by bearcat Quote Link to comment Share on other sites More sharing options...
sebelec Posted January 11, 2019 Share #70 Posted January 11, 2019 Hello Eveybody, i bought a HP NC360T and i recovery an access to my NAS with my data. Hourra ! But it's weird every application doesn't work. And i can't update my DSM in update4. i have an error. When i check my interface LAN1 and LAN2 it's empty ! The problème is here, Synology does'nt see my network card, did you know why ? i can not connect in SSH, the connection closed in 10s. Quote Link to comment Share on other sites More sharing options...
sebelec Posted January 11, 2019 Share #71 Posted January 11, 2019 The problem appear only if I go on web interface synology. But I would like use the web interface sometimes 😕 Quote Link to comment Share on other sites More sharing options...
sebelec Posted January 12, 2019 Share #72 Posted January 12, 2019 14 hours ago, sebelec said: Hello Eveybody, i bought a HP NC360T and i recovery an access to my NAS with my data. Hourra ! But it's weird every application doesn't work. And i can't update my DSM in update4. i have an error. When i check my interface LAN1 and LAN2 it's empty ! The problème is here, Synology does'nt see my network card, did you know why ? i can not connect in SSH, the connection closed in 10s. i tried to reinstall DSM... Same problem... i d'ont understand why... Thank you all... Quote Link to comment Share on other sites More sharing options...
hoidoi Posted January 12, 2019 Share #73 Posted January 12, 2019 (edited) @sebelec do you have deactivated the internal nic? My dsm 6.2.1 did not show the internal (Not working) Broadcom interfaces, but counted them in the pic devices list. So, just an idea, when your grub contains only nic1 and one MAC, dsm could use this entry for the bad nic and have just no mojo (MAC ressources) for the additional HP NC360T. Edited January 12, 2019 by hoidoi Corrections Quote Link to comment Share on other sites More sharing options...
sebelec Posted January 12, 2019 Share #74 Posted January 12, 2019 46 minutes ago, hoidoi said: @sebelec do you have deactivated the internal nic? My dsm 6.2.1 did not show the internal (Not working) Broadcom interfaces, but counted them in the pic devices list. So, just an idea, when your grub contains only nic1 and one MAC, dsm could use this entry for the bad nic and have just no mojo (MAC ressources) for the additional HP NC360T. Yes i disabled the internal nic. i have an access by ssh I can see the log but i dont’ Know what looking for. Quote Link to comment Share on other sites More sharing options...
sebelec Posted January 12, 2019 Share #75 Posted January 12, 2019 i found log file !! Anybody see a problem ? messages Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.