Joe Bethersonton

Dell OptiPlex 7010 USFF - Problems with 6.2

Recommended Posts

I was given a Dell OptiPlex 7010 USFF. (i3-3220 (Ivy Bridge), 4GB memory, Intel NIC)

It runs baremetal 3617xs with 6.1.4 perfectly. I'm trying to install 6.2, but I can't get it working.

 

The user flyride shared a spreadsheet with configurations that should work. I use the 1.03b bootloader, and disabled the uefi option, so I only boot in legacy mode.

The loader boots, and Synology Assistant can find the NAS, but I get the classic "Failed to install the file. The file is probably corrupted. (13)" error.

 

With the ds3615xs loader I have tried the following combinations of SN and MAC:

  • SN and MAC provided with the loader
  • Generated SN and generated MAC
  • SN and MAC from a real Synology device.
  • SN from a real Synology device, and the OptiPlex's own MAC.

I have tried with both 6.2.23739 and 6.2.23824.

Every time I get that 13-error.

 

Any tips on how to fix this?

 

I am currently considering buying new hardware for a build, but I want to get some experience with XPEnology first. If I can't get this working I might end up buying another Synology device, although I would prefer some more powerful hardware.

 

Share this post


Link to post
Share on other sites

did you have the latest bios on your dell computer? 

 

I used the 1.03b loader and I installed DSM 6.2-23739 update 2 my dell is Optiplex 790

 

And try a different usb stick 

Edited by michel30

Share this post


Link to post
Share on other sites
5 hours ago, michel30 said:

did you have the latest bios on your dell computer? 

 

I used the 1.03b loader and I installed DSM 6.2-23739 update 2 my dell is Optiplex 790

 

And try a different usb stick 

I am not sure to be honest. I can try and download another one.

I will try and see if I can find another brand USB stick. I have five identical ones that I switch between.

Share this post


Link to post
Share on other sites

I have the same machine.

three things.

1) make sure your USB stick's VID and PID is correct

2) make sure your boot device is set to AHCI

3) use UEFI on 1.04, BIOS on 1.03a/b

 

Share this post


Link to post
Share on other sites

I looks like my BIOS settings was correct all along. I upgraded the BIOS to the latest version, and tried another USB stick.

Now it works!

I installed 6.2.23739 and afterwards upgraded to 6.2.1.23824 without any problems.

 

(Using 1.03b ds3615xs)

Share this post


Link to post
Share on other sites

Hi all, I just successfully updated ds3615xs to 6.2.2-24922 on Optiplex 7010 SFF with i5-3470. Nice, cheap and quite powerfull HW!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.