Jump to content
XPEnology Community

DSM 6.2.1-23824 Update 1


Hostilian
 Share

Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824

- Loader version and model: JUN'S LOADER v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS H110I-Plus/CSM LGA 1151 Mini-ITX Motherboard  / CPU I5-3570S / IO Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell Non-Raid SI-PEX40064  / DISKS 4 2TB Western Digital Red Nas Drives /  Nic  Onboard 1 x Realtek 8111H Gigabit   Would rather use different nic but only have one pcie slot taken by controller. Seems to work fine though.

Link to comment
Share on other sites

 Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: JUN v.1.03 - DS3615 DSM 6.2-23739 Update2

- Loader version and model: Jun v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASROCK Q1900ITX

- Additional comments: Realtec NIC seems to come up a few bit later than on DS3615 BOOTLoader (but machine will be up within 1 minute)

  • Thanks 1
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1 23824

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Oracle/Sun Ultra 24 

- Additional comments: Worked like a charm

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1 23824

- Loader version and model: Jun v1.04b - DS918 

- Using custom extra.lzma: N/A

- Installation Type: BAREMETAL -  GA-X99-UD3 / CPU: Intel i7 5820k / LAN: Internal Intel® GbE LAN / RAM: 32GB

Link to comment
Share on other sites

- Outcome of update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 update 1 -> DSM 6.2.1-23739 Update 2

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs -> JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver G7 N54L Intel NIC - 4Go

 

- Outcome of update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 update 1 -> DSM 6.2.1-23739 Update 2

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs -> JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXI 6.5.0 Update 2 (Build 10390116) - AMD Phenom II 1045T - 8Go

 

Edited by Polanskiman
Link to comment
Share on other sites

- Outcome of update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23739 Update 2 DSM 6.2.1-23824

- Loader version and model:  JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - Esxi 6.7.0

- Additional comments: CPU: 2 Intel X5675 @ 3.07Ghz / Memory: 191.94GB

VM Config:

CPU: 8vCPUs

Memory: 64GB

Hard Disk 1: Sata 0:0 (Boot Image)

Hard Disk 2: Sata 1:0 (Data Disk)

Network Adapter: E1000e

 

Using a 3617 Boot Image and a 3615 Serial Number resulted in no network access/boot failure.  Correcting serial number back to 3615 S/N and system booted correctly.

 

The performance on this system is horrid.   Even the UI is super slow on DSM.    Memory and processor are averaging 1% but the performance is essentially unusable. 

Edited by Polanskiman
Edited the post. Read the READ ME topics!
Link to comment
Share on other sites

- Outcome of update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver G7 N54L with Intel NIC - NC360T

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  Asrock N3700-ITX  /  Thecus N4800

- Additional comments: No Internet connection. I'm missing the error. That's why I've provided a DSM 6.1.7 return.

Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM_DS918+_23824

- Loader version and model: JUN'S LOADER v1.04b

- Using custom extra.lzma: NO

- Installation type: BAREMETAL  ASRock Q1900-ITX

- Additional comments: Internal NIC works great

- Additional comments: REBOOT, OK and Shutdown OK

SDR Mode with 3 WD 2tb red drives and 2 Crucial BX500 2.5" 120GB SATA for caching

 

Edited by rickym
Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - HP Microserver GEN 8 - ESXi 6.7 + 1 VMDK on SSD + 4 RDM Drives

- Additional comments: See below

========================================================================================

* Modded synoboot IMG (50MB) via osfmount, loaded as a SATA disk (0:0) <- boot from this partition (change SataPortMap=88 , DiskIdxMap=0 in grub.cfg) and set S/N  & MAC accordingly (used OLD SN format)

* System partition 20GB on a SATA disk (0:1)

* Use NIC E1000e (VMXNET3 does not work anymore)

* 4 RDM mounted as SATA on dedicated Controller (1:0, 1:1, 1:2, 1:3) (Because SCSI devices are no more recognized, so you can also delete SCSI controller)

* open-vm-tools.spk 6.1_10.2.0-1

Edited by simoareva
Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: Fresh Install

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - HP Microserver GEN 8 - ESXi 6.7 + 1 VMDK on SSD + 3 RDM Drives (Network vnic set to E1000e)

- Additional comments: See below

========================================================================================

  • RDM Drives where loaded on DSM 6.2 Update #2 DS3617xs.
  • Migrating to new VM DS3615xs was as simple as assigning the drives to the new VM (after DSM 6.2.1 U1 was setup) and letting DSM repair the partitions.
  • Didn't make changes to SataPortMap or DiskIdxMap (Interested in knowing why would I need to do so? @simoareva).
  • HP Microserver Specs - 16GB ECC RAM, Xeon E3-1265L V2, 3x 2T Drives, 1x 500GB SSD(ESXi Datastore).
Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM_DS918+_23824

- Loader version and model: JUN'S LOADER v1.04b

- Using custom extra.lzma: NO

- Installation type: BAREMETAL  ASRock J5005-ITX

- Additional comments: Internal NIC works great

- Additional comments: REBOOT, OK and Shutdown OK

 

Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 with JUN v.1.03b - DS3615xs  

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - TerraMaster F2-220

- Additional comments: with loader v.1.03b - DS3615xs the DSM 6.2.1 not boot at all... with new loader, migrate succesfully without data loss

Edited by compuman
Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP G7 N54L  /  internal NIC disable / add NIC HP NC360T PCI Express Dual Port Gigabit Server Adapter

- Additional comments: No Problem.

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  DSM 6.2.1-23739 Update 2

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - GIGABYTE GA-J3455N-D3H 4x3TB WD Green

- Additional comments: Hibernation and automatic shutdown now works again, Internal NIC working fine, 

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP G7 N54L  /  internal NIC disable / add NIC Intel E1G42ET (Intel 82576T)  PCI Express Dual Port Gigabit Server Adapter

- Additional comments:

  • Performance sensation slower than previous version 6.1.7 (needs more time in the booting process until it's possible to connect to the GUI)
  • PHPVirtualBox 5.2.20 works perfect
  • Reboot / Shutdown not works normally, The DSM operation systems shutdown correctly but  not send the Power Off /Restart signal  to the physical server.
Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update:  ~DSM 6.1? unsure what version as I used a drive from an earlier install and opted for migration option during installation

- Loader version and model: Jun v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock J3455M 4GB memory

- Additional comments:  Intel and onboard NIC both reported but 2 completely different IP address ranges. 

Connected LAN 2 (intel) is 192.168.x.x address, onboard LAN 1 is 168.254.x.x

Also have 4port SATA card attached with attached drive...all working fine but not completely tested all functions

 

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2, Jun v1.03b - DS3615

- Loader version and model: Jun v1.03b - DS3615

- Using custom extra.lzma: NO

- Installation type: VM - Proxmox 5.2-12

- Additional comments: Changed LAN from e1000 to e1000e

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1-7-15284

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL DS3615XS - Asrock C2550D4I

- Additional comments: Everything works, except usb3 extension card (unofficial PCIe)

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: DSM 6.1-7-15284

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL HP Microserver GEN8

- Additional comments: Internal NIC disabled - Added Intel 4-port NIC card before update - Not booting now

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...