Jump to content
XPEnology Community

DSM 6.2.1-23824 Update 1


Hostilian
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824

- Loader version and model: JUN'S LOADER v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - MSI Gaming 5 Motherboard  / CPU I5-4670K / DISKS 2 4TB Western Digital Red Nas Drives /  Nic  Onboard 1 x Killer 2200 Gigabit.

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 1

- Loader version and model: JUN'S LOADER v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL

- Additional comments: Work fine, upgrading from DSM 6.1 loader 1.02

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP G7 N54L  /  internal NIC disable / add NIC HP NC360t Intel pro PCI Express Dual Port Gigabit Server Adapter onto PCIE x4 slot (no hw mod needed)

- Additional comments: Reboot / Shutdown does not work normally: The DSM operation systems shutdown correctly but the HP N54L does not go to standby, green led still on and fan spinning. No Reboot or WOL possible.

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7-15284 on DS3617xs

- Loader version and model: JUN'S LOADER v1.04b - DS918+ 6.2.1-23824 updt 1

- Using custom extra.lzma: NO 

- Installation type: BAREMETAL -  3455M 8GB SATA 4 port card, Intel NIC

- Additional comments: 2 volumes, 1 encrypted

 

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2 on DS3615xs

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO 

- Installation type: BAREMETAL *  SuperMicro X9SCM-F (Intel C204 Chipset) * Intel® 82579LM and 82574L (onboard lan) * Intel Xeon E3-1270v2 * 32 GB Ram * LSI 9201-16i HBA * Mellanox Connect-x 3 10gb SFP+

- Additional comments: Once installed, had to reconfigure the Synoinfo.conf to reenable SHR as well as to fix the drive amount.  Once done, rebooted and drives showed up and data scrubbing was forced. 

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO 

- Installation type: BAREMETAL *  SuperMicro X9SCM-F (Intel C204 Chipset) * Intel® 82579LM and 82574L (onboard lan) * Intel Xeon E3-1270v2 * 32 GB Ram * LSI 9201-16i HBA * Mellanox Connect-x 3 10gb SFP+

- Additional comments: did not have to re-edit the conf file - reboot came back up with no issues.

Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824

- Loader version and model: JUN'S LOADER v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL Dell T30

Additional comments: Updated today to  DSM 6.2.1-23824 update 2 - Loader version and model: JUN'S LOADER v1.04b - DS918

Link to comment
Share on other sites

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  HP G7 N54L  /  internal NIC disable / add NIC HP NC360T PCI Express Dual Port Gigabit Server Adapter

- Additional comments: No Problem.

 

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM -  ESXI 6.5  / LAN 1000E

- Additional comments: restart and shutdown don't work (same problem with DSM 6.2.1-23824 update 1)

Link to comment
Share on other sites

Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM_DS918+_23824

- Loader version and model: JUN'S LOADER v1.04b

- Using custom extra.lzma: NO

- Installation type: BAREMETAL  ASRock J5005-ITX

- Additional comments: Internal NIC works great / REBOOT, OK and Shutdown OK

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824

- Loader version and model: JUN'S LOADER v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asrock J5005-ITX

- Additional comments: Update worked fine. Reboot and Shutdown are ok. Hardware Acceleration via Emby works great, 10-15%% CPU Usage while transcoding a 4k Movie to FullHD and Streaming that over the Network.

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824

- Loader version and model: Jun's Loader v1.03a - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock J3455-ITX

-Additional Comments:   /dev/dri directory present with 3 files.  1.  card0, 2. controlD64 and 3.  renderD123 .. Hardware Transcoding working with Emby Server.

                                            Onboard Realtek RTL8111GR Network Adapter disabled, using PCI Intel Network Adapter.

Link to comment
Share on other sites

  • Polanskiman changed the title to DSM 6.2.1-23824 Update 1
  • Polanskiman unfeatured this topic
  • 10 months later...
  • 1 year later...

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.1.1-5217

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver Gen 8 /  NIC: HP NC360L

- Additional comments: 

  -- This was by no means plain sailing, I got the ERROR 13 first due to the wrong PAT file, make sure you get the critical one and not the standard one from their site.

 --Then after installing I had nothing, no ping nothing. I had a NC360L in the cupboard so installed that but could not find a way to find the MAC so left the grub as it was and  disabled the internal NICs in the BIOS.

--Then when I tried to switch on the HP gen 8 it would just sit there and blink a green light, for hours, after some digging I found that replacing the CMOS battery will fix it which it did.. I know...Random right!

--I then had life, but got a message stating no HARDDRIVES from DSM - so back to the BIOS and I disabled the internal RAID and switched on AHCI and it now works

      -- Internal NIC not recognized

      -- HDDs lost until ACHI switched on

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...