Jump to content
XPEnology Community
  • 0

DSM 6.1 network configuration issue


manalishit

Question

Hi experts,

I'm running Xpenology 6.1 on an Asus Baremetal system.

 

After a VLAN modification on a BOND the DSM was not accessible anymore. Meanwhile I'm able to connect via ssh (only putty, no winSCP)  on the eth2 interface.

I cannot access DSM weblogin on this adapter either. I renamed the "ifcfg-bond0" file in the "etc/sysconfig/network-scripts" folder and changed the content of the two ifcfg files for the nics like this:

 

DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.X.X
NETMASK=255.255.255.0

 

after rebooting the system ifconfig -a shows no ip's for the eth0 and the eth3

1.png.1dc1d0c0d79bd17982ac28666e3de1b3.png

 

After reboot the "ifcfg-eth0" file has a new line at the end. It seems that it's been modified by the system while rebooting.

BRIDGE""

 I don't have a clue why ti's possible to connect via Putty and not by WinSCP and also via web (port 5000). 

Any ideas what could cause the connectivity problem?

Link to comment
Share on other sites

1 answer to this question

Recommended Posts

  • 0

My system setup:

Loader 1.02b with DSM 6.1.7-15284

Mainboard Asus P10S-V/4L with 4 x Intel® I210AT NIC onboard

 

After investigating my issue I come to the following conclusion:

Enabling VLAN (802.1Q) causes the network error I've descrived above.

 

Before I did the modification on the Baremetal  productive system I did a test on a Virtual Machine DSM 6.1.7-15284 (running on ESXi 6.0). It worked as expected, even with multiple VLANS on an adapter.

 

Can anybody confirm this behavior?

 

Instead of the VLAN definition I think now about adding an additional 4 PORT Intel based PCIe NIC. Will the Loader detect the PCIe NIC or do I need to modify the grub.cfg file?

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...