I'm running Xpenology 6.1 on an Asus Baremetal system.
After a VLAN modification on a BOND the DSM was not accessible anymore. Meanwhile I'm able to connect via ssh (only putty, no winSCP) on the eth2 interface.
I cannot access DSM weblogin on this adapter either. I renamed the "ifcfg-bond0" file in the "etc/sysconfig/network-scripts" folder and changed the content of the two ifcfg files for the nics like this:
Question
manalishit
Hi experts,
I'm running Xpenology 6.1 on an Asus Baremetal system.
After a VLAN modification on a BOND the DSM was not accessible anymore. Meanwhile I'm able to connect via ssh (only putty, no winSCP) on the eth2 interface.
I cannot access DSM weblogin on this adapter either. I renamed the "ifcfg-bond0" file in the "etc/sysconfig/network-scripts" folder and changed the content of the two ifcfg files for the nics like this:
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.X.X
NETMASK=255.255.255.0
after rebooting the system ifconfig -a shows no ip's for the eth0 and the eth3
After reboot the "ifcfg-eth0" file has a new line at the end. It seems that it's been modified by the system while rebooting.
BRIDGE""
I don't have a clue why ti's possible to connect via Putty and not by WinSCP and also via web (port 5000).
Any ideas what could cause the connectivity problem?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.