zoylendt Posted September 18, 2018 Share #1 Posted September 18, 2018 Hi everyone. I'm currently trying to install DSM 6.2 on the following hardware: ASRock J3455-ITX, 1x G.Skill SO-DIMM 8 GB DDR3L-1866, 1x 8GB USB-Stick, 2x 2TB HDDs, 300W PSU. I'm using the "XPEnology Tool for Windows x64 V1.3.3", and it works flawlessly with the Loader 1.02b (and "DSM 6.1.7 15284 for DS916+"). However, since I want DSM 6.2 I aimed for the Loader 1.02b. But non of his versions (DS3615xs or DS3617xs) are showing up on the network after the first boot (checked via router and Synology Assistant), making the following setup or troubleshooting impossible. A connected monitor shows the correct post-boot-message ("... Screen will stop updating shortly, ...") and the LAN-activity-LEDs on the motherboard show activity. I hope you guys can help me with this issue. However, if it's not fixable, I'd like to know if my CPU is powerful enough to emulate the DSM using ESXi (after adding a SSD for ESXi and possibly more RAM). Thanks in advance, zoylendt Quote Link to comment Share on other sites More sharing options...
sirotkaslo Posted September 24, 2018 Share #2 Posted September 24, 2018 unfortunately I have the same issues, I gave up in the end and just went with 6.1 and 916+boot loader. Everything there works as it should Quote Link to comment Share on other sites More sharing options...
dh22r Posted September 24, 2018 Share #3 Posted September 24, 2018 I think I'd the same issues initially. Screen showing loader as booted, but not able to connect via the web GUI or visible via synology assistant. Turned out, for me, I had to boot with legacy bios (ie. not UEFI). dh22r Quote Link to comment Share on other sites More sharing options...
sirotkaslo Posted September 25, 2018 Share #4 Posted September 25, 2018 On 9/24/2018 at 5:31 PM, dh22r said: I think I'd the same issues initially. Screen showing loader as booted, but not able to connect via the web GUI or visible via synology assistant. Turned out, for me, I had to boot with legacy bios (ie. not UEFI). dh22r Isnt it necessary for 6.2 to disable legacy boot? Quote Link to comment Share on other sites More sharing options...
Hostilian Posted September 25, 2018 Share #5 Posted September 25, 2018 I think I needed to use an add in Network card on my J3455 board.. (Intel single port).. Quote Link to comment Share on other sites More sharing options...
sirotkaslo Posted September 26, 2018 Share #6 Posted September 26, 2018 I have an intel pro 1000 pt added, but it won't work. My mobo is J3455B-itx Quote Link to comment Share on other sites More sharing options...
Hostilian Posted September 27, 2018 Share #7 Posted September 27, 2018 Just checked and my onboard NIC works fine too. It's an Asrock J3455-ITX board (the one with 4x Sata). Loader 1.03b 6.2 U2 is installed (I've not tried 6.2.1 yet).. Both boards (mine and the 2x Sata 'B' version) have the same onboard NIC, so it should work... 1 Quote Link to comment Share on other sites More sharing options...
sirotkaslo Posted September 28, 2018 Share #8 Posted September 28, 2018 I guess something is different with the B version. It just don't work regardless of which NIC i use. Also now it shuts down after a while and thats it really. Quote Link to comment Share on other sites More sharing options...
Hostilian Posted September 29, 2018 Share #9 Posted September 29, 2018 Have you tried the 1.03B loader? Your post suggests you only tried 1.02B.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.