aleoo77 Posted September 14, 2018 Share #1 Posted September 14, 2018 Hello, I would like to install synology on one of my old Dell poweredge t300 servers which has 4 GB of RAM. I mounted a 30 Gb ssd for the system and two 3 Tb disks for storage. I tried to download I do not know which version (think ds3617xs) but tells me that there are no disks installed (although from the BIOS and with puppy I see them). Can you give me a hand and guide me on what to download and how? thank you so much. Alessandro Quote Link to comment Share on other sites More sharing options...
Dfds Posted September 15, 2018 Share #2 Posted September 15, 2018 @aleoo77 Please provide more information about which loader & DSM version you're trying to install, also it would be helpful if you could say what network card & sata controller you have. Quote Link to comment Share on other sites More sharing options...
aleoo77 Posted September 17, 2018 Author Share #3 Posted September 17, 2018 hello, I do not know where I can see all the info that you ask me so I took a bit 'of photos on the setup page of the bios and I send them. The machine on which I would like to install synology is: Dell PowerEdge T300 I do not even know which loader or DSM version is right for me. thank you very much for your patience Alessandro Dell PowerEdge T300.zip Quote Link to comment Share on other sites More sharing options...
aleoo77 Posted September 19, 2018 Author Share #4 Posted September 19, 2018 I took pictures of the cards too.... I hope they can be useful Photos.zip Quote Link to comment Share on other sites More sharing options...
aleoo77 Posted October 5, 2018 Author Share #5 Posted October 5, 2018 Help me please! Quote Link to comment Share on other sites More sharing options...
bearcat Posted October 5, 2018 Share #6 Posted October 5, 2018 (edited) On 9/15/2018 at 12:46 AM, aleoo77 said: I mounted a 30 Gb ssd for the system and two 3 Tb disks for storage This is not how it works with DSM... The system will be installed on ALL drives, the drives will be partitioned with 3 partitions 1 - System, 2 - Swap, 3 - Datastorage. and the first 2 will be identical on all drives. Dfds was asking you of what files you tried to use for your install, any pictures of your hardware, bios, car or girlfriend will not answer him or other who might want to help Unless you know what file you downloaded, it might be hard for us to guess. Start with reading: Read it all, but when you try to follow it, skip the part about migrating, and follow the installation of 6.1.x If you get this to work, you might try to update to 6.2 later. Edited October 5, 2018 by bearcat Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.