DS3617XS DSM6.2 on Proxmox 5.2 with Jun's loader v1.03b

[toseeme]

1. Standard host on Proxmox, BIOS=SeaBIOS. SATA0 reserved for loader img. add additional data storage HDD on SATA1. setup boot media from SATA0. add serial port for you troubleshooting.

**Pay attention on network, use Intel E1000 instead of VirtIO ** - VirtIO cannot get IP address on network (My experience)

 

2. copy synoboot.img to /var/lib/vz/image, convert img to qcow2 by qemu-img convert, my qm host ID is 100, please modify to yours.

 ** example: qemu-img convert -f raw -O qcow2 /var/lib/vz/images/100/synoboot.img /var/lib/vz/images/100/vm-100-disk-1.qcow2

 

3. import disk by qm inportdisk

** example: qm importdisk 100 /var/lib/vz/images/100/vm-100-disk1.qcow2 <your-qve-disk>

 

4. back to Proxmox devices setting, attach disk as SATA0.

 

5. qm start 100 and monitor on serial port.

 

6. find.synology,com or find IP from your router, using 3617xs 6.2-23729.pat, after launch system, update to 23739 update2.

 

 

Edited September 12, 2018 by toseeme

[yozz]

hey!

what disk i need past on part 3?

 

3. import disk by qm inportdisk

** example: qm importdisk 100 /var/lib/vz/images/100/vm-100-disk1.qcow2 <your-qve-disk>

 

vm-100-disk-0? (sata0 boot disk) or something else?

 

if i try this - i see error "ERROR: unknown command 'qm importdisk'"

 

nvm, i did misprint

 

Edited September 27, 2018 by yozz

[toseeme]

4 hours ago, yozz said:

hey!

what disk i need past on part 3?

 

3. import disk by qm inportdisk

** example: qm importdisk 100 /var/lib/vz/images/100/vm-100-disk1.qcow2 <your-qve-disk>

 

vm-100-disk-0? (sata0 boot disk) or something else?

 

if i try this - i see error "ERROR: unknown command 'qm importdisk'"

 

nvm, i did misprint

 

pls try qm --help on your PVE, it will provide you this command as example:

 

qm importdisk <vmid> <source> <storage> [OPTIONS]

[kazuni]

serial doesn't report anything now... could it be that jun disabled serial piping ?

[toseeme]

Have you add it on Hardware? And check activate information on host console.

[themogul504]

 I cannot get an get an ip address using proxmox 5.2 

[themogul504]

What do i do here I converted to file to qcow2 how would I get the vm to see it. I don't understand part 3. the import to your <your-qve-disk> (what do i do at this part?)

[toseeme]

19 hours ago, themogul504 said:

What do i do here I converted to file to qcow2 how would I get the vm to see it. I don't understand part 3. the import to your <your-qve-disk> (what do i do at this part?)

 

the datacnter hdd resource you have. such as hdd-thin. you can check on storage view - Datecenter, which under your Proxmox server list. for mine is hdd-thin. 

[toseeme]

19 hours ago, themogul504 said:

 I cannot get an get an ip address using proxmox 5.2 

 

this is my conf for your refer.

[WillWilson]

Managed to get DS3617XS working on proxmox like you but can't upgrade to DSM 6.2.1-23824 Update 4

 

 

Have you been able todo it?

[Antaris]

Thanks dude,

I also manged to install it on Proxmox 5.3-7 and find small error in step 3:

 

"** example: qm importdisk 100 /var/lib/vz/images/100/vm-100-disk1.qcow2 <your-qve-disk>"

should be:

"** example: qm importdisk 100 /var/lib/vz/images/100/vm-100-disk-1.qcow2 <your-qve-disk>"

according to example in previous step.

[Antaris]

Any clue from where to get QEMU guest agent?

[wenlez]

There is no QEMU guest agent for Xpenology. At least not at the moment. 

[toseeme]

On ‎11‎/‎20‎/‎2018 at 4:31 PM, themogul504 said:

 I cannot get an get an ip address using proxmox 5.2 

 

use intel e1000 instead of virtIO network card

[toseeme]

On ‎1‎/‎20‎/‎2019 at 9:31 PM, Antaris said:

Thanks dude,

I also manged to install it on Proxmox 5.3-7 and find small error in step 3:

 

"** example: qm importdisk 100 /var/lib/vz/images/100/vm-100-disk1.qcow2 <your-qve-disk>"

should be:

"** example: qm importdisk 100 /var/lib/vz/images/100/vm-100-disk-1.qcow2 <your-qve-disk>"

according to example in previous step.

<your-qve-disk> means the location where your PVE server saves your host. for me is Local-LVM. you can find it as picture show. 

[toseeme]

it's also working on DSM918+ 1.04b with new  DSM_DS918+_23824.pat

[Shawn]

On 9/11/2018 at 9:31 PM, toseeme said:

system

hi, toseeme

 

I followed your post but I got "no hard disk" error. Any ideas why?

PVE version is 5.4-3.

loader 1.03b

 

 

 

[graddumdum]

On 9/12/2018 at 8:31 AM, toseeme said:

qm importdisk 100 /var/lib/vz/images/100/vm-100-disk1.qcow2 <your-qve-disk>

 

Its still giving me an error.

 

root@Proxmos:~# qm importdisk 102 /var/lib/vz/images/102/vm-102-disk1.qcow2 local-lvm
/var/lib/vz/images/102/vm-102-disk1.qcow2: non-existent or non-regular file