Upgrade from 6.0.2 to 6.1.7 gone wrong

[jobinjv 0]

I was trying to upgrade from 6.0.2-8451 to 6.1.7-15284.  I run the software on an AMD system. However, the upgrade didnt go well and I am faced with a migration screen. Is there any chance to get it working on 6.1.7 or even to return back to 6.0.2

[Polanskiman 262]

And what exactly is the problem? I don’t see anything wrong in those messages.

[jobinjv 0]

After that it just fails. If I try to migrate of keep files and new settings, it just doesn't go beyond that 

[jobinjv 0]

Now that i pulled out the USB and tried to insert back the old one, nothing happens. The screen stays ate Loading operating System.., nothing appears on Synology assistant, be it the old USB, new 1.02b or 1.03b loader. 

[jobinjv 0]

I changed my nic yet, its the same now. I am not able to source any Intel NIC as well. A question, would I be able to get the raid back if I was to change to board and processor and connect back the present disks.

[Polanskiman 262]

Please provide more information about your system.

[jobinjv 0]

Board: Gigabyte GA-890FXA-UD  (rev. 1.0)

Processor: AMD AM3 Phenom II

OnBoard NIC: Realtek 8111D

USB: SanDisk Cruzer 32GB

Add-on NICs: Dlink DGE-560T (RTL8139 chipset), Tp-Link TG-3269 (RTL8169SC)

 

I tried to USB on my i3 Processor PC which has a 8169 Chipset, and it booted up and showed in Synology Assistant 

[jobinjv 0]

I have a PC with the follwoing spec

 

Board: Gigabyte P85-D3

Processor: Core i3-4160

 

If i connect the HDD in the same sequence as the previous build, would I have any luck ?

[Polanskiman 262]

11 hours ago, jobinjv said:

I have a PC with the follwoing spec

 

Board: Gigabyte P85-D3

Processor: Core i3-4160

 

If i connect the HDD in the same sequence as the previous build, would I have any luck ?

 

In principle yes.

 

As for you AMD system did you read this in the tutorial I made?

 

On 9/12/2017 at 5:59 PM, Polanskiman said:

Note: Jun's loader supports Intel CPUs. For AMD CPUs Jun has stated that the loader needs some work but it has been reported by many users using HP machines that it actually works. The C1E function in the bios (in some HP machines) needs to be deactivated. I am unsure for other motherboards brands therefore if you have an AMD machine that is not an HP you might be out of luck. Try looking in the bios configuration and play around. 

[jobinjv 0]

22 hours ago, Polanskiman said:

 

In principle yes.

 

As for you AMD system did you read this in the tutorial I made?

 

 

Unlucky I should say none of the playing with bios worked in my case. I guess I will have to try moving the RAID on to a MB in the same sequence and have my fingers crossed it will work.