Jump to content
XPEnology Community

Upgrade from 6.0.2 to 6.1.7 gone wrong


Recommended Posts

Board: Gigabyte GA-890FXA-UD  (rev. 1.0)

Processor: AMD AM3 Phenom II

OnBoard NIC: Realtek 8111D

USB: SanDisk Cruzer 32GB

Add-on NICs: Dlink DGE-560T (RTL8139 chipset), Tp-Link TG-3269 (RTL8169SC)

 

I tried to USB on my i3 Processor PC which has a 8169 Chipset, and it booted up and showed in Synology Assistant 

Link to comment
Share on other sites

11 hours ago, jobinjv said:

I have a PC with the follwoing spec

 

Board: Gigabyte P85-D3

Processor: Core i3-4160

 

If i connect the HDD in the same sequence as the previous build, would I have any luck ?

 

In principle yes.

 

As for you AMD system did you read this in the tutorial I made?

 

On 9/12/2017 at 5:59 PM, Polanskiman said:

Note: Jun's loader supports Intel CPUs. For AMD CPUs Jun has stated that the loader needs some work but it has been reported by many users using HP machines that it actually works. The C1E function in the bios (in some HP machines) needs to be deactivated. I am unsure for other motherboards brands therefore if you have an AMD machine that is not an HP you might be out of luck. Try looking in the bios configuration and play around. 

Link to comment
Share on other sites

22 hours ago, Polanskiman said:

 

In principle yes.

 

As for you AMD system did you read this in the tutorial I made?

 

 

Unlucky I should say none of the playing with bios worked in my case. I guess I will have to try moving the RAID on to a MB in the same sequence and have my fingers crossed it will work. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...