Jump to content
XPEnology Community

DSM 6.2.1-23824 - WARNING


Polanskiman
Message added by Polanskiman

Please read the READ ME topic before posting:

 

Recommended Posts

- Outcome of the installation/update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2 + JUN'S LOADER v1.03b - DS3615xs ---> to DSM version 6.2.1-23824 + JUN'S LOADER v1.03b - DS3615xs

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP ProLiant Microserver Gen8

- Additional comments: Blame me for not reading. I just read the previous comment

Link to comment
Share on other sites

- Outcome of the installation: SUCCESSFUL

- DSM version prior update: None.. This is a fresh install on 6.2.1 (23824)

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASUS H87-i PLUS with i3 CPU..

- Additional comments: Test install, on a spare disk, before trying an upgrade.. To my surprise the onboard AND add-in (4 port Intel) cards all work great. Even LACP bonded without an issue. Looking good. Not sure whether to try an upgrade - from the existing 6.1.7 u1 install on the same hardware, but different set of disks - or wait until it's out of Beta.

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - HP Microserver GEN 8 - esxi 6.7

- Additional comments: NIC: e1000 changed to e1000e

Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 UPDATE 2

- Loader version and model: JUN'S LOADER v1.02a2 - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL -  DMI: To Be Filled By O.E.M./N3150DC-ITX, BIOS P1.40 12/15/2015

- Additional comments: Intel NIC -ok   Realtek- fault

[Sat Oct 13 22:43:05 2018] r8168: Unknown symbol pci_disable_link_state (err 0)

 

  • Like 1
Link to comment
Share on other sites

- Outcome of the installation/update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM - Dell R720 - esxi 6.7 

- Additional comments: None

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Microserver GEN 8 

- Additional comments: On-board NIC no longer works after this update. Had to throw in a 4-port PCIe NIC (Intel Corporation I350 Gigabit Network Connection) 

  • Thanks 2
Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Gigabyte ga-h97n-wifi

- Additional comments: On-board NIC Atheros no longer works after this update. On-board NIC Intel works OK.

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03a - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL

- Additional comments: Did not work with onboard NIC. Following comments on this topic, I bought a intel NIC added it, stopped DSM, disabled the onboard NIC. Update was applied successfully then.

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.02b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Dell Optiplex 9020

- Additional comments: None

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Asus P8H61-I (intel I3)

- Additional comments: None

  • Like 1
Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7

-  Additional comments: Network Interface need to be changed to E1000e

Link to comment
Share on other sites

- Outcome of the installation/update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP Elite 7200 i5 (NIC 82579LM)

-  Additional comments: No Network, but NIC 82567LF work fine

Link to comment
Share on other sites

  •  Outcome of the installation/update: SUCCESSFUL
  • DSM version prior update: fresh installation
  • Loader version and model: JUN'S LOADER v1.03a2 - DS918+
  • Using custom extra.lzma: NO
  • Installation type: BAREMETAL - Asrock H110M-ITX, Intel Pentium G4600 (Kaby Lake), 8GB Ram
  • Additional comments: only original SN used

 

Bildschirmfoto 2018-10-16 um 22.08.13.png

Edited by Polanskiman
Comment removed.
Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: Fresh Installation

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: VM - ESXi 6.7 Update1

- Additional comments: Network Interface need to be changed to E1000e

Link to comment
Share on other sites

- Outcome of the installation/update: UNSUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Terramaster F2-420

- Additional comments: Lan is dual Realtek (lspci reports 10ec:8168 rev 07 therefore a 8168f)

Link to comment
Share on other sites

- Outcome of the installation: SUCCESSFUL

 - DSM version prior update: None.. This is a fresh install on 6.2.1 (23824)

- Loader version and model: JUN'S LOADER v1.03a - DS918+

- Using custom extra.lzma: NO

- Installation type: VM - VMware ESXi 6.7u1 Oct 16 release on Optiplex 7020 (8 Core/8GB RAM)

- Additional comments: 

  • Must use E1000E as NIC, VMXNET3 no longer works.
  • Must use 50mb vmdk lead disk as SATA 0:0
  • Second and above vmdk must sit in SATA0:1~11 (12 disk config)
  • I used a proper set of SN/MAC, don't know if this affects the installation or not.
  • Like 1
Link to comment
Share on other sites

- Outcome of the installation: SUCCESSFUL

  - DSM version prior update: None. This is a fresh install on 6.2.1 (23824)

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - QNAP TS-853A, 16GB RAM

- Additional comments: All 4 NIC works OOTB - I used a proper set of SN/MAC, don't know if this affects the installation or not.

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2-23739 Update 2

 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - W-B250 from taobao (link: https://item.taobao.com/item.htm?spm=a1z09.2.0.0.37f02e8d1Ge3Zv&id=573141435687&_u=i2qem6r130df) - CPU: i7 7700T

Link to comment
Share on other sites

- Outcome of the installation: UNSUCCESSFUL

  - DSM version prior update: Update from 6.2 update 2

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: VM - VMWare Workstation 12 Pro 

- Additional comments: Bootloader works, but can't access the WebGUI. On-board Intel NIC doesn't seem to get an IP Address

Link to comment
Share on other sites

- Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: None (fresh install)

- Loader version and model: Jun's loader v1.03b - DS3617xs

- Using custom extra.lzma: No

- Installation type: Baremetal - ASRock E3C236D2I (Intel C236), 5 6TB SATA disks

- Additional comments: worked first time! 😊

Edited by Vileserver
Link to comment
Share on other sites

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.1.7 15284

- Loader version and model: JUN'S LOADER v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Oracle/Sun Ultra 24 

- Additional comments: Worked like a charm

Link to comment
Share on other sites

- Outcome of the update: UNSUCCESSFUL

- DSM version prior update: FRESH INSTALL

- Loader version and model: JUN'S LOADER v1.03b - DS3617xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - HP MEDIASMART EX485 

- Additional comments: Did not show up in network, rebooting made no difference.

Link to comment
Share on other sites

 Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM_DS3615xs_23739

- Loader version and model: Jun's loader v1.03b - DS3615xs

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - Dell 790

- Additional comments: worked no problem at all

Link to comment
Share on other sites

 Outcome of the installation/update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824

 - Loader version and model: JUN'S LOADER v1.04b - DS918

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock j5005-ITX

- Additional comments: NONE

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...